PISTON + CONROD KIT VR38 D95.5 S2

■Feature

POINT-1 Parts for Higher Engine Output

• Factory replacement type piston & connecting rods kit with the standard bore size.
• To avoid piston land breakage, HKS pistons are made with forged material instead of casting like the factory pistons. The shape of STEP2 is the same as STEP1.
• It's recommended to use with other items of the GT800 Package.
• In-house test at 900PS confirmed the durability and safety.
• The setting range is widened by reducing the compression rate from 9.0 factory ratio to 8.7. This is effective to increase the engine output using the aluminum block specs and/or bigger cylinder bore.
• STEP2 piston's recess is 1mm deeper than a stock to best use with the STEP2 camshaft.

POINT-2 Factory Replacement Type

• The weight of the connecting rod is the same as the factory since the affect of the V6 engine's peculiar vibration should be considered.
• The piston is light-weighted to approximately 25g.
• The weight is optimized to install to the factory crankshaft so it is not necessary to use a dummy weight to balance.

POINT-3 Higher Reliability by In-house Design & Production

• The best 3D profile for this piston was selected after various profile tests. The forged material exclusively for HKS was used.
• With the results of in-house analysis on the factory connecting rod, the durability is improved by approx 46% maintaining the balance.
• All parts are MADE IN JAPAN.

■Picture

Left: STEP2 Connecting rods
Right: STEP1 Connecting rods

Piston＆Connecting rod set