{"title":"TrackOne","description":"","products":[{"product_id":"ford-focus-st-12-17","title":"Ford Focus ST (12-17)","description":"\u003cp\u003e\u003cstrong\u003eT1-11-1110\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFord Focus ST (2012-2017)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpring Rate -\u003c\/strong\u003e Front 8K \/ Rear 5K \u003c\/p\u003e\n\u003cp\u003eStreet Coilovers are designed to give you the best ride quality without sacrificing any comfort or reliability. Our goal was to design a suspension setup that is reliable for daily driving while providing an enjoyable sporty ride that could be driven on the track.  All setups feature adjustable ride height and 32way or 12way dampening to adapt the ride to your preference. We spent a lot of time sourcing the best components and brought them all together with the help of a reputable engineering company that was up for the task.\u003c\/p\u003e\n\u003cp\u003eStarting with the strut, we invested a lot of time to ensure that they are both durable and reliable. We start with a durable heat-treated steel piston and needle valve to ensure proper travel and linear compression ratio. The strut body is designed to handle the heat and the life cycle it will be put through. Each strut is filled with proprietary oil that is designed to maintain its viscosity even under increased heat or abuse. The oil will keep its unique properties over the years to maintain that same ride quality. This is crucial to the quality and longevity of the strut. Poor quality suspension setups use cheaper oil that can become frothy, lose its strength and degrade overtime. These inferior suspension systems will lose their fluid movement and\/or become too soft. We finish the strut piston with longstanding, high-heat rated double seals that are designed to take abuse without breaking a sweat, literally. No leaking struts here. The strut is the most important part of any suspension system. It determines the ride quality and the overall feel. We do not just use a stiffer spring at the suspension to compensate for a poor quality strut; instead we made sure to start from scratch and build a complete coilover that will differentiate itself from the rest.\u003c\/p\u003e\n\u003cp\u003eNext we pair the struts with a high-tensile strength steel spring that is designed to last without sagging or premature wear. Springs are tested to ensure there is no coil bind and full range of motion. The high quality strut and dampening allows us to use the proper spring rates needed for each setup that will complement the adjustable dampening rates. Each spring is mounted on adjustable aluminum perches that can be used to adjust preload and travel. Incorporated washer and spacers are in place to keep the system free moving especially on McPherson style struts.\u003c\/p\u003e\n\u003cp\u003eThe coilover system is finished with a combination of powder coating, electroplating, and anodizing to give it a great look and protect it. McPherson style struts feature adjustable upper camber plates and pillow ball mounts.\u003c\/p\u003e","brand":"TrackOne Development","offers":[{"title":"Default Title","offer_id":42176011272270,"sku":"T1-11-1110","price":1094.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/9484\/5518\/files\/T1-1-1110-FordFocusST_2012-2017_-1WM.jpg?v=1737562051"},{"product_id":"mazda-3-04-13","title":"Mazda 3 (04-13)","description":"\u003cp\u003e\u003cstrong\u003eT1-11-1100 \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eMazda 3 (2004-2013)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpring Rate - \u003c\/strong\u003eFront 8K \/ Rear 5K\u003c\/p\u003e\n\u003cp\u003eStreet Coilovers are designed to give you the best ride quality without sacrificing any comfort or reliability. Our goal was to design a suspension setup that is reliable for daily driving while providing an enjoyable sporty ride that could be driven on the track.  All setups feature adjustable ride height and 32way or 12way dampening to adapt the ride to your preference. We spent a lot of time sourcing the best components and brought them all together with the help of a reputable engineering company that was up for the task.\u003c\/p\u003e\n\u003cp\u003eStarting with the strut, we invested a lot of time to ensure that they are both durable and reliable. We start with a durable heat-treated steel piston and needle valve to ensure proper travel and linear compression ratio. The strut body is designed to handle the heat and the life cycle it will be put through. Each strut is filled with proprietary oil that is designed to maintain its viscosity even under increased heat or abuse. The oil will keep its unique properties over the years to maintain that same ride quality. This is crucial to the quality and longevity of the strut. Poor quality suspension setups use cheaper oil that can become frothy, lose its strength and degrade overtime. These inferior suspension systems will lose their fluid movement and\/or become too soft. We finish the strut piston with longstanding, high-heat rated double seals that are designed to take abuse without breaking a sweat, literally. No leaking struts here. The strut is the most important part of any suspension system. It determines the ride quality and the overall feel. We do not just use a stiffer spring at the suspension to compensate for a poor quality strut; instead we made sure to start from scratch and build a complete coilover that will differentiate itself from the rest.\u003c\/p\u003e\n\u003cp\u003eNext we pair the struts with a high-tensile strength steel spring that is designed to last without sagging or premature wear. Springs are tested to ensure there is no coil bind and full range of motion. The high quality strut and dampening allows us to use the proper spring rates needed for each setup that will complement the adjustable dampening rates. Each spring is mounted on adjustable aluminum perches that can be used to adjust preload and travel. Incorporated washer and spacers are in place to keep the system free moving especially on McPherson style struts.\u003c\/p\u003e\n\u003cp\u003eThe coilover system is finished with a combination of powder coating, electroplating, and anodizing to give it a great look and protect it. McPherson style struts feature adjustable upper camber plates and pillow ball mounts.\u003cbr\u003e\u003c\/p\u003e","brand":"TrackOne Development","offers":[{"title":"Default Title","offer_id":42176011305038,"sku":"T1-11-1100","price":1094.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/9484\/5518\/files\/T1-11-1100-Mazda3_04-13_-1WM.jpg?v=1737562050"},{"product_id":"ford-mustang-05-14","title":"Ford Mustang (05-14)","description":"\u003cp\u003e\u003cstrong\u003eT1-11-1120\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFord Mustang (2005-2014)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpring Rate - \u003c\/strong\u003eFront 10K \/ Rear 7K \u003c\/p\u003e\n\u003cp\u003eStreet Coilovers are designed to give you the best ride quality without sacrificing any comfort or reliability. Our goal was to design a suspension setup that is reliable for daily driving while providing an enjoyable sporty ride that could be driven on the track.  All setups feature adjustable ride height and 32way or 12way dampening to adapt the ride to your preference. We spent a lot of time sourcing the best components and brought them all together with the help of a reputable engineering company that was up for the task.\u003c\/p\u003e\n\u003cp\u003eStarting with the strut, we invested a lot of time to ensure that they are both durable and reliable. We start with a durable heat-treated steel piston and needle valve to ensure proper travel and linear compression ratio. The strut body is designed to handle the heat and the life cycle it will be put through. Each strut is filled with proprietary oil that is designed to maintain its viscosity even under increased heat or abuse. The oil will keep its unique properties over the years to maintain that same ride quality. This is crucial to the quality and longevity of the strut. Poor quality suspension setups use cheaper oil that can become frothy, lose its strength and degrade overtime. These inferior suspension systems will lose their fluid movement and\/or become too soft. We finish the strut piston with longstanding, high-heat rated double seals that are designed to take abuse without breaking a sweat, literally. No leaking struts here. The strut is the most important part of any suspension system. It determines the ride quality and the overall feel. We do not just use a stiffer spring at the suspension to compensate for a poor quality strut; instead we made sure to start from scratch and build a complete coilover that will differentiate itself from the rest.\u003c\/p\u003e\n\u003cp\u003eNext we pair the struts with a high-tensile strength steel spring that is designed to last without sagging or premature wear. Springs are tested to ensure there is no coil bind and full range of motion. The high quality strut and dampening allows us to use the proper spring rates needed for each setup that will complement the adjustable dampening rates. Each spring is mounted on adjustable aluminum perches that can be used to adjust preload and travel. Incorporated washer and spacers are in place to keep the system free moving especially on McPherson style struts.\u003c\/p\u003e\n\u003cp\u003eThe coilover system is finished with a combination of powder coating, electroplating, and anodizing to give it a great look and protect it. McPherson style struts feature adjustable upper camber plates and pillow ball mounts.\u003c\/p\u003e","brand":"TrackOne Development","offers":[{"title":"Default Title","offer_id":42176011337806,"sku":"T1-11-1120","price":1094.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/9484\/5518\/files\/T1-11-1120-FordMustang_05-13_-1WM.jpg?v=1737562051"},{"product_id":"mazda-rx-7-fd-92-02","title":"Mazda RX-7 FD (92-02)","description":"\u003cp\u003e\u003cstrong\u003eT1-11-1210\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMazda RX-7 (1992-2002)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpring Rate -\u003c\/strong\u003e Front 10K \/ Rear 8K \u003c\/p\u003e\n\u003cp\u003eStreet Coilovers are designed to give you the best ride quality without sacrificing any comfort or reliability. Our goal was to design a suspension setup that is reliable for daily driving while providing an enjoyable sporty ride that could be driven on the track.  All setups feature adjustable ride height and 32way or 12way dampening to adapt the ride to your preference. We spent a lot of time sourcing the best components and brought them all together with the help of a reputable engineering company that was up for the task.\u003c\/p\u003e\n\u003cp\u003eStarting with the strut, we invested a lot of time to ensure that they are both durable and reliable. We start with a durable heat-treated steel piston and needle valve to ensure proper travel and linear compression ratio. The strut body is designed to handle the heat and the life cycle it will be put through. Each strut is filled with proprietary oil that is designed to maintain its viscosity even under increased heat or abuse. The oil will keep its unique properties over the years to maintain that same ride quality. This is crucial to the quality and longevity of the strut. Poor quality suspension setups use cheaper oil that can become frothy, lose its strength and degrade overtime. These inferior suspension systems will lose their fluid movement and\/or become too soft. We finish the strut piston with longstanding, high-heat rated double seals that are designed to take abuse without breaking a sweat, literally. No leaking struts here. The strut is the most important part of any suspension system. It determines the ride quality and the overall feel. We do not just use a stiffer spring at the suspension to compensate for a poor quality strut; instead we made sure to start from scratch and build a complete coilover that will differentiate itself from the rest.\u003c\/p\u003e\n\u003cp\u003eNext we pair the struts with a high-tensile strength steel spring that is designed to last without sagging or premature wear. Springs are tested to ensure there is no coil bind and full range of motion. The high quality strut and dampening allows us to use the proper spring rates needed for each setup that will complement the adjustable dampening rates. Each spring is mounted on adjustable aluminum perches that can be used to adjust preload and travel. Incorporated washer and spacers are in place to keep the system free moving especially on McPherson style struts.\u003c\/p\u003e\n\u003cp\u003eThe coilover system is finished with a combination of powder coating, electroplating, and anodizing to give it a great look and protect it. McPherson style struts feature adjustable upper camber plates and pillow ball mounts.\u003c\/p\u003e","brand":"TrackOne Development","offers":[{"title":"Default Title","offer_id":42176011206734,"sku":"T1-11-1210","price":1094.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/9484\/5518\/files\/T1-11-1210-MazdaRX-7_92-02_-1WM.jpg?v=1737562050"},{"product_id":"ford-mustang-15","title":"Ford Mustang (15+)","description":"\u003cp\u003e\u003cstrong\u003eT1-11-1130\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFord Mustang (2015+)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpring Rate - \u003c\/strong\u003eFront 8K \/ Rear 10K \u003c\/p\u003e\n\u003cp\u003eStreet Coilovers are designed to give you the best ride quality without sacrificing any comfort or reliability. Our goal was to design a suspension setup that is reliable for daily driving while providing an enjoyable sporty ride that could be driven on the track.  All setups feature adjustable ride height and 32way or 12way dampening to adapt the ride to your preference. We spent a lot of time sourcing the best components and brought them all together with the help of a reputable engineering company that was up for the task.\u003c\/p\u003e\n\u003cp\u003eStarting with the strut, we invested a lot of time to ensure that they are both durable and reliable. We start with a durable heat-treated steel piston and needle valve to ensure proper travel and linear compression ratio. The strut body is designed to handle the heat and the life cycle it will be put through. Each strut is filled with proprietary oil that is designed to maintain its viscosity even under increased heat or abuse. The oil will keep its unique properties over the years to maintain that same ride quality. This is crucial to the quality and longevity of the strut. Poor quality suspension setups use cheaper oil that can become frothy, lose its strength and degrade overtime. These inferior suspension systems will lose their fluid movement and\/or become too soft. We finish the strut piston with longstanding, high-heat rated double seals that are designed to take abuse without breaking a sweat, literally. No leaking struts here. The strut is the most important part of any suspension system. It determines the ride quality and the overall feel. We do not just use a stiffer spring at the suspension to compensate for a poor quality strut; instead we made sure to start from scratch and build a complete coilover that will differentiate itself from the rest.\u003c\/p\u003e\n\u003cp\u003eNext we pair the struts with a high-tensile strength steel spring that is designed to last without sagging or premature wear. Springs are tested to ensure there is no coil bind and full range of motion. The high quality strut and dampening allows us to use the proper spring rates needed for each setup that will complement the adjustable dampening rates. Each spring is mounted on adjustable aluminum perches that can be used to adjust preload and travel. Incorporated washer and spacers are in place to keep the system free moving especially on McPherson style struts.\u003c\/p\u003e\n\u003cp\u003eThe coilover system is finished with a combination of powder coating, electroplating, and anodizing to give it a great look and protect it. McPherson style struts feature adjustable upper camber plates and pillow ball mounts.\u003c\/p\u003e","brand":"TrackOne Development","offers":[{"title":"Default Title","offer_id":42176011239502,"sku":"T1-11-1130","price":1094.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/9484\/5518\/files\/T1-11-1130-FordMustang15_-1WM.jpg?v=1737562050"},{"product_id":"mazda-miata-nd-16","title":"Mazda Miata ND (16+)","description":"\u003cp\u003e\u003cstrong\u003eT1-11-1200 \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMazda Miata (2016+)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpring Rate -\u003c\/strong\u003e Front 7K \/ Rear 4K \u003c\/p\u003e\n\u003cp\u003eStreet Coilovers are designed to give you the best ride quality without sacrificing any comfort or reliability. Our goal was to design a suspension setup that is reliable for daily driving while providing an enjoyable sporty ride that could be driven on the track.  All setups feature adjustable ride height and 32way or 12way dampening to adapt the ride to your preference. We spent a lot of time sourcing the best components and brought them all together with the help of a reputable engineering company that was up for the task.\u003c\/p\u003e\n\u003cp\u003eStarting with the strut, we invested a lot of time to ensure that they are both durable and reliable. We start with a durable heat-treated steel piston and needle valve to ensure proper travel and linear compression ratio. The strut body is designed to handle the heat and the life cycle it will be put through. Each strut is filled with proprietary oil that is designed to maintain its viscosity even under increased heat or abuse. The oil will keep its unique properties over the years to maintain that same ride quality. This is crucial to the quality and longevity of the strut. Poor quality suspension setups use cheaper oil that can become frothy, lose its strength and degrade overtime. These inferior suspension systems will lose their fluid movement and\/or become too soft. We finish the strut piston with longstanding, high-heat rated double seals that are designed to take abuse without breaking a sweat, literally. No leaking struts here. The strut is the most important part of any suspension system. It determines the ride quality and the overall feel. We do not just use a stiffer spring at the suspension to compensate for a poor quality strut; instead we made sure to start from scratch and build a complete coilover that will differentiate itself from the rest.\u003c\/p\u003e\n\u003cp\u003eNext we pair the struts with a high-tensile strength steel spring that is designed to last without sagging or premature wear. Springs are tested to ensure there is no coil bind and full range of motion. The high quality strut and dampening allows us to use the proper spring rates needed for each setup that will complement the adjustable dampening rates. Each spring is mounted on adjustable aluminum perches that can be used to adjust preload and travel. Incorporated washer and spacers are in place to keep the system free moving especially on McPherson style struts.\u003c\/p\u003e\n\u003cp\u003eThe coilover system is finished with a combination of powder coating, electroplating, and anodizing to give it a great look and protect it. McPherson style struts feature adjustable upper camber plates and pillow ball mounts.\u003c\/p\u003e","brand":"TrackOne Development","offers":[{"title":"Default Title","offer_id":42176012222542,"sku":"T1-11-1200","price":1094.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/9484\/5518\/files\/T1-11-1200-MazdaMiata_15_-1WM.jpg?v=1737562054"},{"product_id":"mazda-3-14","title":"Mazda 3 (14+)","description":"\u003cp\u003e\u003cstrong\u003eT1-11-1170 \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMazda 3 (2014-2018)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpring Rate: \u003c\/strong\u003eFront 6K \/ Rear 5K\u003c\/p\u003e\n\u003cp\u003eStreet Coilovers are designed to give you the best ride quality without sacrificing any comfort or reliability. Our goal was to design a suspension setup that is reliable for daily driving while providing an enjoyable sporty ride that could be driven on the track. All setups feature adjustable ride height and 32way or 12way dampening to adapt the ride to your preference. We spent a lot of time sourcing the best components and brought them all together with the help of a reputable engineering company that was up for the task.\u003cbr\u003e\u003cbr\u003eStarting with the strut, we invested a lot of time to ensure that they are both durable and reliable. We start with a durable heat-treated steel piston and needle valve to ensure proper travel and linear compression ratio. The strut body is designed to handle the heat and the life cycle it will be put through. Each strut is filled with proprietary oil that is designed to maintain its viscosity even under increased heat or abuse. The oil will keep its unique properties over the years to maintain that same ride quality. This is crucial to the quality and longevity of the strut. Poor quality suspension setups use cheaper oil that can become frothy, lose its strength and degrade overtime. These inferior suspension systems will lose their fluid movement and\/or become too soft. We finish the strut piston with longstanding, high-heat rated double seals that are designed to take abuse without breaking a sweat, literally. No leaking struts here. The strut is the most important part of any suspension system. It determines the ride quality and the overall feel. We do not just use a stiffer spring at the suspension to compensate for a poor quality strut; instead we made sure to start from scratch and build a complete coilover that will differentiate itself from the rest.\u003cbr\u003e\u003cbr\u003eNext we pair the struts with a high-tensile strength steel spring that is designed to last without sagging or premature wear. Springs are tested to ensure there is no coil bind and full range of motion. The high quality strut and dampening allows us to use the proper spring rates needed for each setup that will complement the adjustable dampening rates. Each spring is mounted on adjustable aluminum perches that can be used to adjust preload and travel. Incorporated washer and spacers are in place to keep the system free moving especially on McPherson style struts.\u003cbr\u003e\u003cbr\u003eThe coilover system is finished with a combination of powder coating, electroplating, and anodizing to give it a great look and protect it. McPherson style struts feature adjustable upper camber plates and pillow ball mounts.\u003c\/p\u003e","brand":"TrackOne Development","offers":[{"title":"Default Title","offer_id":42176012288078,"sku":"T1-11-1170","price":1094.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/9484\/5518\/files\/T1-11-1170-1WM.jpg?v=1737562055"},{"product_id":"mazda-miata-na-90-98","title":"Mazda Miata NA (90-98)","description":"\u003cp\u003e\u003cstrong\u003eT1-11-1181\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMazda Miata (1990-1998)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpring Rate -\u003c\/strong\u003e Front 8K \/ Rear 6K \u003c\/p\u003e\n\u003cp\u003eStreet Coilovers are designed to give you the best ride quality without sacrificing any comfort or reliability. Our goal was to design a suspension setup that is reliable for daily driving while providing an enjoyable sporty ride that could be driven on the track.  All setups feature adjustable ride height and 32way or 12way dampening to adapt the ride to your preference. We spent a lot of time sourcing the best components and brought them all together with the help of a reputable engineering company that was up for the task.\u003c\/p\u003e\n\u003cp\u003eStarting with the strut, we invested a lot of time to ensure that they are both durable and reliable. We start with a durable heat-treated steel piston and needle valve to ensure proper travel and linear compression ratio. The strut body is designed to handle the heat and the life cycle it will be put through. Each strut is filled with proprietary oil that is designed to maintain its viscosity even under increased heat or abuse. The oil will keep its unique properties over the years to maintain that same ride quality. This is crucial to the quality and longevity of the strut. Poor quality suspension setups use cheaper oil that can become frothy, lose its strength and degrade overtime. These inferior suspension systems will lose their fluid movement and\/or become too soft. We finish the strut piston with longstanding, high-heat rated double seals that are designed to take abuse without breaking a sweat, literally. No leaking struts here. The strut is the most important part of any suspension system. It determines the ride quality and the overall feel. We do not just use a stiffer spring at the suspension to compensate for a poor quality strut; instead we made sure to start from scratch and build a complete coilover that will differentiate itself from the rest.\u003c\/p\u003e\n\u003cp\u003eNext we pair the struts with a high-tensile strength steel spring that is designed to last without sagging or premature wear. Springs are tested to ensure there is no coil bind and full range of motion. The high quality strut and dampening allows us to use the proper spring rates needed for each setup that will complement the adjustable dampening rates. Each spring is mounted on adjustable aluminum perches that can be used to adjust preload and travel. Incorporated washer and spacers are in place to keep the system free moving especially on McPherson style struts.\u003c\/p\u003e\n\u003cp\u003eThe coilover system is finished with a combination of powder coating, electroplating, and anodizing to give it a great look and protect it. McPherson style struts feature adjustable upper camber plates and pillow ball mounts.\u003c\/p\u003e","brand":"TrackOne Development","offers":[{"title":"Default Title","offer_id":42176012320846,"sku":"T1-11-1181","price":1094.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/9484\/5518\/files\/T1-11-1181-MazdaMiata_90-98_-1WM.jpg?v=1737562054"},{"product_id":"mazda-miata-nb-99-04","title":"Mazda Miata NB (99-04)","description":"\u003cp\u003e\u003cstrong\u003eT1-11-1190\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMazda Miata \/ MX5 (1999-2004)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpring Rate -\u003c\/strong\u003e Front 8K \/ Rear 6K \u003c\/p\u003e\n\u003cp\u003eStreet Coilovers are designed to give you the best ride quality without sacrificing any comfort or reliability. Our goal was to design a suspension setup that is reliable for daily driving while providing an enjoyable sporty ride that could be driven on the track.  All setups feature adjustable ride height and 32way or 12way dampening to adapt the ride to your preference. We spent a lot of time sourcing the best components and brought them all together with the help of a reputable engineering company that was up for the task.\u003c\/p\u003e\n\u003cp\u003eStarting with the strut, we invested a lot of time to ensure that they are both durable and reliable. We start with a durable heat-treated steel piston and needle valve to ensure proper travel and linear compression ratio. The strut body is designed to handle the heat and the life cycle it will be put through. Each strut is filled with proprietary oil that is designed to maintain its viscosity even under increased heat or abuse. The oil will keep its unique properties over the years to maintain that same ride quality. This is crucial to the quality and longevity of the strut. Poor quality suspension setups use cheaper oil that can become frothy, lose its strength and degrade overtime. These inferior suspension systems will lose their fluid movement and\/or become too soft. We finish the strut piston with longstanding, high-heat rated double seals that are designed to take abuse without breaking a sweat, literally. No leaking struts here. The strut is the most important part of any suspension system. It determines the ride quality and the overall feel. We do not just use a stiffer spring at the suspension to compensate for a poor quality strut; instead we made sure to start from scratch and build a complete coilover that will differentiate itself from the rest.\u003c\/p\u003e\n\u003cp\u003eNext we pair the struts with a high-tensile strength steel spring that is designed to last without sagging or premature wear. Springs are tested to ensure there is no coil bind and full range of motion. The high quality strut and dampening allows us to use the proper spring rates needed for each setup that will complement the adjustable dampening rates. Each spring is mounted on adjustable aluminum perches that can be used to adjust preload and travel. Incorporated washer and spacers are in place to keep the system free moving especially on McPherson style struts.\u003c\/p\u003e\n\u003cp\u003eThe coilover system is finished with a combination of powder coating, electroplating, and anodizing to give it a great look and protect it. McPherson style struts feature adjustable upper camber plates and pillow ball mounts.\u003c\/p\u003e","brand":"TrackOne Development","offers":[{"title":"Default Title","offer_id":42176012255310,"sku":"T1-11-1190","price":1094.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/9484\/5518\/files\/T1-11-1190-MazdaMiata_1999-2004_-1WM.jpg?v=1737562054"},{"product_id":"nissan-350z-03-08","title":"Nissan 350Z (03-08)","description":"\u003cp\u003e\u003cstrong\u003eT1-11-1150\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNissan 350Z (2003-2008)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpring Rate -\u003c\/strong\u003e Front 10K \/ Rear 7K\u003c\/p\u003e\n\u003cp\u003eStreet Coilovers are designed to give you the best ride quality without sacrificing any comfort or reliability. Our goal was to design a suspension setup that is reliable for daily driving while providing an enjoyable sporty ride that could be driven on the track.  All setups feature adjustable ride height and 32way or 12way dampening to adapt the ride to your preference. We spent a lot of time sourcing the best components and brought them all together with the help of a reputable engineering company that was up for the task.\u003c\/p\u003e\n\u003cp\u003eStarting with the strut, we invested a lot of time to ensure that they are both durable and reliable. We start with a durable heat-treated steel piston and needle valve to ensure proper travel and linear compression ratio. The strut body is designed to handle the heat and the life cycle it will be put through. Each strut is filled with proprietary oil that is designed to maintain its viscosity even under increased heat or abuse. The oil will keep its unique properties over the years to maintain that same ride quality. This is crucial to the quality and longevity of the strut. Poor quality suspension setups use cheaper oil that can become frothy, lose its strength and degrade overtime. These inferior suspension systems will lose their fluid movement and\/or become too soft. We finish the strut piston with longstanding, high-heat rated double seals that are designed to take abuse without breaking a sweat, literally. No leaking struts here. The strut is the most important part of any suspension system. It determines the ride quality and the overall feel. We do not just use a stiffer spring at the suspension to compensate for a poor quality strut; instead we made sure to start from scratch and build a complete coilover that will differentiate itself from the rest.\u003c\/p\u003e\n\u003cp\u003eNext we pair the struts with a high-tensile strength steel spring that is designed to last without sagging or premature wear. Springs are tested to ensure there is no coil bind and full range of motion. The high quality strut and dampening allows us to use the proper spring rates needed for each setup that will complement the adjustable dampening rates. Each spring is mounted on adjustable aluminum perches that can be used to adjust preload and travel. Incorporated washer and spacers are in place to keep the system free moving especially on McPherson style struts.\u003c\/p\u003e\n\u003cp\u003eThe coilover system is finished with a combination of powder coating, electroplating, and anodizing to give it a great look and protect it. McPherson style struts feature adjustable upper camber plates and pillow ball mounts.\u003c\/p\u003e","brand":"TrackOne Development","offers":[{"title":"Default Title","offer_id":42176012353614,"sku":"T1-11-1150","price":1094.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/9484\/5518\/files\/T1-11-1150-Nissan350ZG35_03-08_-1WM.jpg?v=1737562054"},{"product_id":"scion-fr-s-12-21","title":"Scion FR-S (12-21)","description":"\u003cp\u003e\u003cstrong\u003eT1-11-1280\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eScion FR-S (2012-2021)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpring Rate -\u003c\/strong\u003e Front 8K \/ Rear 6K \u003c\/p\u003e\n\u003cp\u003eStreet Coilovers are designed to give you the best ride quality without sacrificing any comfort or reliability. Our goal was to design a suspension setup that is reliable for daily driving while providing an enjoyable sporty ride that could be driven on the track.  All setups feature adjustable ride height and 32way or 12way dampening to adapt the ride to your preference. We spent a lot of time sourcing the best components and brought them all together with the help of a reputable engineering company that was up for the task.\u003c\/p\u003e\n\u003cp\u003eStarting with the strut, we invested a lot of time to ensure that they are both durable and reliable. We start with a durable heat-treated steel piston and needle valve to ensure proper travel and linear compression ratio. The strut body is designed to handle the heat and the life cycle it will be put through. Each strut is filled with proprietary oil that is designed to maintain its viscosity even under increased heat or abuse. The oil will keep its unique properties over the years to maintain that same ride quality. This is crucial to the quality and longevity of the strut. Poor quality suspension setups use cheaper oil that can become frothy, lose its strength and degrade overtime. These inferior suspension systems will lose their fluid movement and\/or become too soft. We finish the strut piston with longstanding, high-heat rated double seals that are designed to take abuse without breaking a sweat, literally. No leaking struts here. The strut is the most important part of any suspension system. It determines the ride quality and the overall feel. We do not just use a stiffer spring at the suspension to compensate for a poor quality strut; instead we made sure to start from scratch and build a complete coilover that will differentiate itself from the rest.\u003c\/p\u003e\n\u003cp\u003eNext we pair the struts with a high-tensile strength steel spring that is designed to last without sagging or premature wear. Springs are tested to ensure there is no coil bind and full range of motion. The high quality strut and dampening allows us to use the proper spring rates needed for each setup that will complement the adjustable dampening rates. Each spring is mounted on adjustable aluminum perches that can be used to adjust preload and travel. Incorporated washer and spacers are in place to keep the system free moving especially on McPherson style struts.\u003c\/p\u003e\n\u003cp\u003eThe coilover system is finished with a combination of powder coating, electroplating, and anodizing to give it a great look and protect it. McPherson style struts feature adjustable upper camber plates and pillow ball mounts.\u003c\/p\u003e","brand":"TrackOne Development","offers":[{"title":"Default Title","offer_id":42176012746830,"sku":"T1-11-1280","price":1094.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/9484\/5518\/files\/T1-11-1280-BRZ-FRS-GT86-1WM.jpg?v=1737562058"},{"product_id":"mazda-6-09-11-2wd","title":"Mazda 6 (09-11) - 2WD","description":"\u003cp\u003e\u003cstrong\u003eT1-11-1430\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMazda 6 2WD (2009-2011)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpring Rate -\u003c\/strong\u003e Front 14K \/ Rear 8K \u003c\/p\u003e\n\u003cp\u003eStreet Coilovers are designed to give you the best ride quality without sacrificing any comfort or reliability. Our goal was to design a suspension setup that is reliable for daily driving while providing an enjoyable sporty ride that could be driven on the track.  All setups feature adjustable ride height and 32way or 12way dampening to adapt the ride to your preference. We spent a lot of time sourcing the best components and brought them all together with the help of a reputable engineering company that was up for the task.\u003c\/p\u003e\n\u003cp\u003eStarting with the strut, we invested a lot of time to ensure that they are both durable and reliable. We start with a durable heat-treated steel piston and needle valve to ensure proper travel and linear compression ratio. The strut body is designed to handle the heat and the life cycle it will be put through. Each strut is filled with proprietary oil that is designed to maintain its viscosity even under increased heat or abuse. The oil will keep its unique properties over the years to maintain that same ride quality. This is crucial to the quality and longevity of the strut. Poor quality suspension setups use cheaper oil that can become frothy, lose its strength and degrade overtime. These inferior suspension systems will lose their fluid movement and\/or become too soft. We finish the strut piston with longstanding, high-heat rated double seals that are designed to take abuse without breaking a sweat, literally. No leaking struts here. The strut is the most important part of any suspension system. It determines the ride quality and the overall feel. We do not just use a stiffer spring at the suspension to compensate for a poor quality strut; instead we made sure to start from scratch and build a complete coilover that will differentiate itself from the rest.\u003c\/p\u003e\n\u003cp\u003eNext we pair the struts with a high-tensile strength steel spring that is designed to last without sagging or premature wear. Springs are tested to ensure there is no coil bind and full range of motion. The high quality strut and dampening allows us to use the proper spring rates needed for each setup that will complement the adjustable dampening rates. Each spring is mounted on adjustable aluminum perches that can be used to adjust preload and travel. Incorporated washer and spacers are in place to keep the system free moving especially on McPherson style struts.\u003c\/p\u003e\n\u003cp\u003eThe coilover system is finished with a combination of powder coating, electroplating, and anodizing to give it a great look and protect it. McPherson style struts feature adjustable upper camber plates and pillow ball mounts.\u003c\/p\u003e","brand":"TrackOne Development","offers":[{"title":"Default Title","offer_id":42176012582990,"sku":"T1-11-1430","price":1094.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/9484\/5518\/files\/T1-11-1430-Mazda62WD-1WM.jpg?v=1737562059"},{"product_id":"nissan-370z-09-21","title":"Nissan 370Z (09-21)","description":"\u003cp\u003e\u003cstrong\u003eT1-11-1160\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNissan 370Z (2009-2021)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpring Rate -\u003c\/strong\u003e Front 12K \/ Rear 7K \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eStreet Coilovers are designed to give you the best ride quality without sacrificing any comfort or reliability. Our goal was to design a suspension setup that is reliable for daily driving while providing an enjoyable sporty ride that could be driven on the track.  All setups feature adjustable ride height and 32way or 12way dampening to adapt the ride to your preference. We spent a lot of time sourcing the best components and brought them all together with the help of a reputable engineering company that was up for the task.\u003c\/p\u003e\n\u003cp\u003eStarting with the strut, we invested a lot of time to ensure that they are both durable and reliable. We start with a durable heat-treated steel piston and needle valve to ensure proper travel and linear compression ratio. The strut body is designed to handle the heat and the life cycle it will be put through. Each strut is filled with proprietary oil that is designed to maintain its viscosity even under increased heat or abuse. The oil will keep its unique properties over the years to maintain that same ride quality. This is crucial to the quality and longevity of the strut. Poor quality suspension setups use cheaper oil that can become frothy, lose its strength and degrade overtime. These inferior suspension systems will lose their fluid movement and\/or become too soft. We finish the strut piston with longstanding, high-heat rated double seals that are designed to take abuse without breaking a sweat, literally. No leaking struts here. The strut is the most important part of any suspension system. It determines the ride quality and the overall feel. We do not just use a stiffer spring at the suspension to compensate for a poor quality strut; instead we made sure to start from scratch and build a complete coilover that will differentiate itself from the rest.\u003c\/p\u003e\n\u003cp\u003eNext we pair the struts with a high-tensile strength steel spring that is designed to last without sagging or premature wear. Springs are tested to ensure there is no coil bind and full range of motion. The high quality strut and dampening allows us to use the proper spring rates needed for each setup that will complement the adjustable dampening rates. Each spring is mounted on adjustable aluminum perches that can be used to adjust preload and travel. Incorporated washer and spacers are in place to keep the system free moving especially on McPherson style struts.\u003c\/p\u003e\n\u003cp\u003eThe coilover system is finished with a combination of powder coating, electroplating, and anodizing to give it a great look and protect it. McPherson style struts feature adjustable upper camber plates and pillow ball mounts.\u003c\/p\u003e","brand":"TrackOne Development","offers":[{"title":"Default Title","offer_id":42176012714062,"sku":"T1-11-1160","price":1094.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/9484\/5518\/files\/T1-11-1160-Nissan370Z_09_-1WM.jpg?v=1737562059"},{"product_id":"mazda-rx-8-03-08","title":"Mazda RX-8 (03-08)","description":"\u003cp\u003e\u003cstrong\u003eT1-11-1220\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMazda RX-8 (2003-2008)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpring Rate - \u003c\/strong\u003eFront 10K \/ Rear 8K \u003c\/p\u003e\n\u003cp\u003eStreet Coilovers are designed to give you the best ride quality without sacrificing any comfort or reliability. Our goal was to design a suspension setup that is reliable for daily driving while providing an enjoyable sporty ride that could be driven on the track.  All setups feature adjustable ride height and 32way or 12way dampening to adapt the ride to your preference. We spent a lot of time sourcing the best components and brought them all together with the help of a reputable engineering company that was up for the task.\u003c\/p\u003e\n\u003cp\u003eStarting with the strut, we invested a lot of time to ensure that they are both durable and reliable. We start with a durable heat-treated steel piston and needle valve to ensure proper travel and linear compression ratio. The strut body is designed to handle the heat and the life cycle it will be put through. Each strut is filled with proprietary oil that is designed to maintain its viscosity even under increased heat or abuse. The oil will keep its unique properties over the years to maintain that same ride quality. This is crucial to the quality and longevity of the strut. Poor quality suspension setups use cheaper oil that can become frothy, lose its strength and degrade overtime. These inferior suspension systems will lose their fluid movement and\/or become too soft. We finish the strut piston with longstanding, high-heat rated double seals that are designed to take abuse without breaking a sweat, literally. No leaking struts here. The strut is the most important part of any suspension system. It determines the ride quality and the overall feel. We do not just use a stiffer spring at the suspension to compensate for a poor quality strut; instead we made sure to start from scratch and build a complete coilover that will differentiate itself from the rest.\u003c\/p\u003e\n\u003cp\u003eNext we pair the struts with a high-tensile strength steel spring that is designed to last without sagging or premature wear. Springs are tested to ensure there is no coil bind and full range of motion. The high quality strut and dampening allows us to use the proper spring rates needed for each setup that will complement the adjustable dampening rates. Each spring is mounted on adjustable aluminum perches that can be used to adjust preload and travel. Incorporated washer and spacers are in place to keep the system free moving especially on McPherson style struts.\u003c\/p\u003e\n\u003cp\u003eThe coilover system is finished with a combination of powder coating, electroplating, and anodizing to give it a great look and protect it. McPherson style struts feature adjustable upper camber plates and pillow ball mounts.\u003c\/p\u003e","brand":"TrackOne Development","offers":[{"title":"Default Title","offer_id":42176012779598,"sku":"T1-11-1220","price":1094.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/9484\/5518\/files\/T1-11-1220-MazdaRX-8_03-08_-1WM.jpg?v=1737562058"},{"product_id":"hyundai-genesis-coupe-11-15","title":"Hyundai Genesis Coupe (11-15)","description":"\u003cp\u003e\u003cstrong\u003eT1-11-1140\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHyundai Genesis Coupe(2011-2015)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpring Rate -\u003c\/strong\u003e Front 10K \/ Rear 8K \u003c\/p\u003e\n\u003cp\u003eStreet Coilovers are designed to give you the best ride quality without sacrificing any comfort or reliability. Our goal was to design a suspension setup that is reliable for daily driving while providing an enjoyable sporty ride that could be driven on the track.  All setups feature adjustable ride height and 32way or 12way dampening to adapt the ride to your preference. We spent a lot of time sourcing the best components and brought them all together with the help of a reputable engineering company that was up for the task.\u003c\/p\u003e\n\u003cp\u003eStarting with the strut, we invested a lot of time to ensure that they are both durable and reliable. We start with a durable heat-treated steel piston and needle valve to ensure proper travel and linear compression ratio. The strut body is designed to handle the heat and the life cycle it will be put through. Each strut is filled with proprietary oil that is designed to maintain its viscosity even under increased heat or abuse. The oil will keep its unique properties over the years to maintain that same ride quality. This is crucial to the quality and longevity of the strut. Poor quality suspension setups use cheaper oil that can become frothy, lose its strength and degrade overtime. These inferior suspension systems will lose their fluid movement and\/or become too soft. We finish the strut piston with longstanding, high-heat rated double seals that are designed to take abuse without breaking a sweat, literally. No leaking struts here. The strut is the most important part of any suspension system. It determines the ride quality and the overall feel. We do not just use a stiffer spring at the suspension to compensate for a poor quality strut; instead we made sure to start from scratch and build a complete coilover that will differentiate itself from the rest.\u003c\/p\u003e\n\u003cp\u003eNext we pair the struts with a high-tensile strength steel spring that is designed to last without sagging or premature wear. Springs are tested to ensure there is no coil bind and full range of motion. The high quality strut and dampening allows us to use the proper spring rates needed for each setup that will complement the adjustable dampening rates. Each spring is mounted on adjustable aluminum perches that can be used to adjust preload and travel. Incorporated washer and spacers are in place to keep the system free moving especially on McPherson style struts.\u003c\/p\u003e\n\u003cp\u003eThe coilover system is finished with a combination of powder coating, electroplating, and anodizing to give it a great look and protect it. McPherson style struts feature adjustable upper camber plates and pillow ball mounts.\u003c\/p\u003e","brand":"TrackOne Development","offers":[{"title":"Default Title","offer_id":42176012681294,"sku":"T1-11-1140","price":1094.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/9484\/5518\/files\/T1-11-1140-HyundaiGenesis_2011-2014_-1WM.jpg?v=1737562059"},{"product_id":"scion-xb-08-15","title":"Scion XB (08-15)","description":"\u003cp\u003e\u003cstrong\u003eT1-11-1650\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eScion XB (2008-2015)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpring Rate -\u003c\/strong\u003e Front 7K \/ Rear 3K \u003c\/p\u003e\n\u003cp\u003eStreet Coilovers are designed to give you the best ride quality without sacrificing any comfort or reliability. Our goal was to design a suspension setup that is reliable for daily driving while providing an enjoyable sporty ride that could be driven on the track.  All setups feature adjustable ride height and 32way or 12way dampening to adapt the ride to your preference. We spent a lot of time sourcing the best components and brought them all together with the help of a reputable engineering company that was up for the task.\u003c\/p\u003e\n\u003cp\u003eStarting with the strut, we invested a lot of time to ensure that they are both durable and reliable. We start with a durable heat-treated steel piston and needle valve to ensure proper travel and linear compression ratio. The strut body is designed to handle the heat and the life cycle it will be put through. Each strut is filled with proprietary oil that is designed to maintain its viscosity even under increased heat or abuse. The oil will keep its unique properties over the years to maintain that same ride quality. This is crucial to the quality and longevity of the strut. Poor quality suspension setups use cheaper oil that can become frothy, lose its strength and degrade overtime. These inferior suspension systems will lose their fluid movement and\/or become too soft. We finish the strut piston with longstanding, high-heat rated double seals that are designed to take abuse without breaking a sweat, literally. No leaking struts here. The strut is the most important part of any suspension system. It determines the ride quality and the overall feel. We do not just use a stiffer spring at the suspension to compensate for a poor quality strut; instead we made sure to start from scratch and build a complete coilover that will differentiate itself from the rest.\u003c\/p\u003e\n\u003cp\u003eNext we pair the struts with a high-tensile strength steel spring that is designed to last without sagging or premature wear. Springs are tested to ensure there is no coil bind and full range of motion. The high quality strut and dampening allows us to use the proper spring rates needed for each setup that will complement the adjustable dampening rates. Each spring is mounted on adjustable aluminum perches that can be used to adjust preload and travel. Incorporated washer and spacers are in place to keep the system free moving especially on McPherson style struts.\u003c\/p\u003e\n\u003cp\u003eThe coilover system is finished with a combination of powder coating, electroplating, and anodizing to give it a great look and protect it. McPherson style struts feature adjustable upper camber plates and pillow ball mounts.\u003c\/p\u003e","brand":"TrackOne Development","offers":[{"title":"Default Title","offer_id":42176013041742,"sku":"T1-11-1650","price":1094.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/9484\/5518\/files\/T1-11-1650-ScionXB_2008-2015_-1WM.jpg?v=1737562063"},{"product_id":"mitsubishi-evo-x-08-15","title":"Mitsubishi Evo X (08-15)","description":"\u003cp\u003e\u003cstrong\u003eT1-11-1410\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMitsubishi Lancer Evo X (2008-2015)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpring Rate -\u003c\/strong\u003e Front 8K \/ Rear 7K\u003c\/p\u003e\n\u003cp\u003eStreet Coilovers are designed to give you the best ride quality without sacrificing any comfort or reliability. Our goal was to design a suspension setup that is reliable for daily driving while providing an enjoyable sporty ride that could be driven on the track.  All setups feature adjustable ride height and 32way or 12way dampening to adapt the ride to your preference. We spent a lot of time sourcing the best components and brought them all together with the help of a reputable engineering company that was up for the task.\u003c\/p\u003e\n\u003cp\u003eStarting with the strut, we invested a lot of time to ensure that they are both durable and reliable. We start with a durable heat-treated steel piston and needle valve to ensure proper travel and linear compression ratio. The strut body is designed to handle the heat and the life cycle it will be put through. Each strut is filled with proprietary oil that is designed to maintain its viscosity even under increased heat or abuse. The oil will keep its unique properties over the years to maintain that same ride quality. This is crucial to the quality and longevity of the strut. Poor quality suspension setups use cheaper oil that can become frothy, lose its strength and degrade overtime. These inferior suspension systems will lose their fluid movement and\/or become too soft. We finish the strut piston with longstanding, high-heat rated double seals that are designed to take abuse without breaking a sweat, literally. No leaking struts here. The strut is the most important part of any suspension system. It determines the ride quality and the overall feel. We do not just use a stiffer spring at the suspension to compensate for a poor quality strut; instead we made sure to start from scratch and build a complete coilover that will differentiate itself from the rest.\u003c\/p\u003e\n\u003cp\u003eNext we pair the struts with a high-tensile strength steel spring that is designed to last without sagging or premature wear. Springs are tested to ensure there is no coil bind and full range of motion. The high quality strut and dampening allows us to use the proper spring rates needed for each setup that will complement the adjustable dampening rates. Each spring is mounted on adjustable aluminum perches that can be used to adjust preload and travel. Incorporated washer and spacers are in place to keep the system free moving especially on McPherson style struts.\u003c\/p\u003e\n\u003cp\u003eThe coilover system is finished with a combination of powder coating, electroplating, and anodizing to give it a great look and protect it. McPherson style struts feature adjustable upper camber plates and pillow ball mounts.\u003c\/p\u003e","brand":"TrackOne Development","offers":[{"title":"Default Title","offer_id":42176013008974,"sku":"T1-11-1410","price":1094.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/9484\/5518\/files\/T1-11-1410-MitsubishiEVOX_08-15_-1WM.jpg?v=1737562063"},{"product_id":"mitsubishi-lancer-ralliart-08-17","title":"Mitsubishi Lancer \/ Ralliart (08-17)","description":"\u003cp\u003e\u003cstrong\u003eT1-11-1400\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMitsubishi Lancer (2008-2017)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpring Rate -\u003c\/strong\u003e Front 7K \/ Rear 6K   \u003c\/p\u003e\n\u003cp\u003eStreet Coilovers are designed to give you the best ride quality without sacrificing any comfort or reliability. Our goal was to design a suspension setup that is reliable for daily driving while providing an enjoyable sporty ride that could be driven on the track.  All setups feature adjustable ride height and 32way or 12way dampening to adapt the ride to your preference. We spent a lot of time sourcing the best components and brought them all together with the help of a reputable engineering company that was up for the task.\u003c\/p\u003e\n\u003cp\u003eStarting with the strut, we invested a lot of time to ensure that they are both durable and reliable. We start with a durable heat-treated steel piston and needle valve to ensure proper travel and linear compression ratio. The strut body is designed to handle the heat and the life cycle it will be put through. Each strut is filled with proprietary oil that is designed to maintain its viscosity even under increased heat or abuse. The oil will keep its unique properties over the years to maintain that same ride quality. This is crucial to the quality and longevity of the strut. Poor quality suspension setups use cheaper oil that can become frothy, lose its strength and degrade overtime. These inferior suspension systems will lose their fluid movement and\/or become too soft. We finish the strut piston with longstanding, high-heat rated double seals that are designed to take abuse without breaking a sweat, literally. No leaking struts here. The strut is the most important part of any suspension system. It determines the ride quality and the overall feel. We do not just use a stiffer spring at the suspension to compensate for a poor quality strut; instead we made sure to start from scratch and build a complete coilover that will differentiate itself from the rest.\u003c\/p\u003e\n\u003cp\u003eNext we pair the struts with a high-tensile strength steel spring that is designed to last without sagging or premature wear. Springs are tested to ensure there is no coil bind and full range of motion. The high quality strut and dampening allows us to use the proper spring rates needed for each setup that will complement the adjustable dampening rates. Each spring is mounted on adjustable aluminum perches that can be used to adjust preload and travel. Incorporated washer and spacers are in place to keep the system free moving especially on McPherson style struts.\u003c\/p\u003e\n\u003cp\u003eThe coilover system is finished with a combination of powder coating, electroplating, and anodizing to give it a great look and protect it. McPherson style struts feature adjustable upper camber plates and pillow ball mounts.\u003c\/p\u003e","brand":"TrackOne Development","offers":[{"title":"Default Title","offer_id":42176013074510,"sku":"T1-11-1400","price":1094.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/9484\/5518\/files\/T1-11-1400-MitsubishiLancer_08-17_-1WM.jpg?v=1737562063"},{"product_id":"audi-rs4-06-08","title":"Audi RS4 (06-08)","description":"\u003cp\u003e\u003cstrong\u003eT1-11-1670\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAudi RS4 (2006-2008)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpring Rate - \u003c\/strong\u003eFront 14K \/ Rear 10K \u003c\/p\u003e\n\u003cp\u003eStreet Coilovers are designed to give you the best ride quality without sacrificing any comfort or reliability. Our goal was to design a suspension setup that is reliable for daily driving while providing an enjoyable sporty ride that could be driven on the track.  All setups feature adjustable ride height and 32way or 12way dampening to adapt the ride to your preference. We spent a lot of time sourcing the best components and brought them all together with the help of a reputable engineering company that was up for the task.\u003c\/p\u003e\n\u003cp\u003eStarting with the strut, we invested a lot of time to ensure that they are both durable and reliable. We start with a durable heat-treated steel piston and needle valve to ensure proper travel and linear compression ratio. The strut body is designed to handle the heat and the life cycle it will be put through. Each strut is filled with proprietary oil that is designed to maintain its viscosity even under increased heat or abuse. The oil will keep its unique properties over the years to maintain that same ride quality. This is crucial to the quality and longevity of the strut. Poor quality suspension setups use cheaper oil that can become frothy, lose its strength and degrade overtime. These inferior suspension systems will lose their fluid movement and\/or become too soft. We finish the strut piston with longstanding, high-heat rated double seals that are designed to take abuse without breaking a sweat, literally. No leaking struts here. The strut is the most important part of any suspension system. It determines the ride quality and the overall feel. We do not just use a stiffer spring at the suspension to compensate for a poor quality strut; instead we made sure to start from scratch and build a complete coilover that will differentiate itself from the rest.\u003c\/p\u003e\n\u003cp\u003eNext we pair the struts with a high-tensile strength steel spring that is designed to last without sagging or premature wear. Springs are tested to ensure there is no coil bind and full range of motion. The high quality strut and dampening allows us to use the proper spring rates needed for each setup that will complement the adjustable dampening rates. Each spring is mounted on adjustable aluminum perches that can be used to adjust preload and travel. Incorporated washer and spacers are in place to keep the system free moving especially on McPherson style struts.\u003c\/p\u003e\n\u003cp\u003eThe coilover system is finished with a combination of powder coating, electroplating, and anodizing to give it a great look and protect it. McPherson style struts feature adjustable upper camber plates and pillow ball mounts.\u003c\/p\u003e","brand":"TrackOne Development","offers":[{"title":"Default Title","offer_id":42176013140046,"sku":"T1-11-1670","price":1094.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/9484\/5518\/files\/T1-11-1670-AudiRS406-08-1WM.jpg?v=1737562063"},{"product_id":"chevrolet-camaro-10-15","title":"Chevrolet Camaro (10-15)","description":"\u003cp\u003e\u003cstrong\u003eT1-11-1610\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eChevrolet Camaro (2010-2015)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpring Rate -\u003c\/strong\u003e Front 10K \/ Rear 10K \u003c\/p\u003e\n\u003cp\u003eStreet Coilovers are designed to give you the best ride quality without sacrificing any comfort or reliability. Our goal was to design a suspension setup that is reliable for daily driving while providing an enjoyable sporty ride that could be driven on the track.  All setups feature adjustable ride height and 32way or 12way dampening to adapt the ride to your preference. We spent a lot of time sourcing the best components and brought them all together with the help of a reputable engineering company that was up for the task.\u003c\/p\u003e\n\u003cp\u003eStarting with the strut, we invested a lot of time to ensure that they are both durable and reliable. We start with a durable heat-treated steel piston and needle valve to ensure proper travel and linear compression ratio. The strut body is designed to handle the heat and the life cycle it will be put through. Each strut is filled with proprietary oil that is designed to maintain its viscosity even under increased heat or abuse. The oil will keep its unique properties over the years to maintain that same ride quality. This is crucial to the quality and longevity of the strut. Poor quality suspension setups use cheaper oil that can become frothy, lose its strength and degrade overtime. These inferior suspension systems will lose their fluid movement and\/or become too soft. We finish the strut piston with longstanding, high-heat rated double seals that are designed to take abuse without breaking a sweat, literally. No leaking struts here. The strut is the most important part of any suspension system. It determines the ride quality and the overall feel. We do not just use a stiffer spring at the suspension to compensate for a poor quality strut; instead we made sure to start from scratch and build a complete coilover that will differentiate itself from the rest.\u003c\/p\u003e\n\u003cp\u003eNext we pair the struts with a high-tensile strength steel spring that is designed to last without sagging or premature wear. Springs are tested to ensure there is no coil bind and full range of motion. The high quality strut and dampening allows us to use the proper spring rates needed for each setup that will complement the adjustable dampening rates. Each spring is mounted on adjustable aluminum perches that can be used to adjust preload and travel. Incorporated washer and spacers are in place to keep the system free moving especially on McPherson style struts.\u003c\/p\u003e\n\u003cp\u003eThe coilover system is finished with a combination of powder coating, electroplating, and anodizing to give it a great look and protect it. McPherson style struts feature adjustable upper camber plates and pillow ball mounts.\u003c\/p\u003e","brand":"TrackOne Development","offers":[{"title":"Default Title","offer_id":42176013107278,"sku":"T1-11-1610","price":1094.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/9484\/5518\/files\/T1-11-1610-ChevyCamaro_10-15_-1WM.jpg?v=1737562063"},{"product_id":"scion-xa-04-06-xb-04-07","title":"Scion XA (04-06) XB (04-07)","description":"\u003cp\u003e\u003cstrong\u003eT1-11-1660\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eScion XA (2004-2006)\u003c\/p\u003e\n\u003cp\u003eScion XB (2004-2007)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpring Rate -\u003c\/strong\u003e Front 6K \/ Rear 3K\u003c\/p\u003e\n\u003cp\u003eStreet Coilovers are designed to give you the best ride quality without sacrificing any comfort or reliability. Our goal was to design a suspension setup that is reliable for daily driving while providing an enjoyable sporty ride that could be driven on the track.  All setups feature adjustable ride height and 32way or 12way dampening to adapt the ride to your preference. We spent a lot of time sourcing the best components and brought them all together with the help of a reputable engineering company that was up for the task.\u003c\/p\u003e\n\u003cp\u003eStarting with the strut, we invested a lot of time to ensure that they are both durable and reliable. We start with a durable heat-treated steel piston and needle valve to ensure proper travel and linear compression ratio. The strut body is designed to handle the heat and the life cycle it will be put through. Each strut is filled with proprietary oil that is designed to maintain its viscosity even under increased heat or abuse. The oil will keep its unique properties over the years to maintain that same ride quality. This is crucial to the quality and longevity of the strut. Poor quality suspension setups use cheaper oil that can become frothy, lose its strength and degrade overtime. These inferior suspension systems will lose their fluid movement and\/or become too soft. We finish the strut piston with longstanding, high-heat rated double seals that are designed to take abuse without breaking a sweat, literally. No leaking struts here. The strut is the most important part of any suspension system. It determines the ride quality and the overall feel. We do not just use a stiffer spring at the suspension to compensate for a poor quality strut; instead we made sure to start from scratch and build a complete coilover that will differentiate itself from the rest.\u003c\/p\u003e\n\u003cp\u003eNext we pair the struts with a high-tensile strength steel spring that is designed to last without sagging or premature wear. Springs are tested to ensure there is no coil bind and full range of motion. The high quality strut and dampening allows us to use the proper spring rates needed for each setup that will complement the adjustable dampening rates. Each spring is mounted on adjustable aluminum perches that can be used to adjust preload and travel. Incorporated washer and spacers are in place to keep the system free moving especially on McPherson style struts.\u003c\/p\u003e\n\u003cp\u003eThe coilover system is finished with a combination of powder coating, electroplating, and anodizing to give it a great look and protect it. McPherson style struts feature adjustable upper camber plates and pillow ball mounts.\u003c\/p\u003e","brand":"TrackOne Development","offers":[{"title":"Default Title","offer_id":42176013434958,"sku":"T1-11-1660","price":1094.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/9484\/5518\/files\/T1-11-1660-ScionXA_04-06_ScionXB_04-07_-1WM.jpg?v=1737562067"},{"product_id":"dodge-challenger-08-23","title":"Dodge Challenger (08-23)","description":"\u003cp\u003e\u003cstrong\u003eT1-11-1620\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDodge Challenger (2008-2023)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpring Rate -\u003c\/strong\u003e Front 12K \/ Rear 14K \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eStreet Coilovers are designed to give you the best ride quality without sacrificing any comfort or reliability. Our goal was to design a suspension setup that is reliable for daily driving while providing an enjoyable sporty ride that could be driven on the track.  All setups feature adjustable ride height and 32way or 12way dampening to adapt the ride to your preference. We spent a lot of time sourcing the best components and brought them all together with the help of a reputable engineering company that was up for the task.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eStarting with the strut, we invested a lot of time to ensure that they are both durable and reliable. We start with a durable heat-treated steel piston and needle valve to ensure proper travel and linear compression ratio. The strut body is designed to handle the heat and the life cycle it will be put through. Each strut is filled with proprietary oil that is designed to maintain its viscosity even under increased heat or abuse. The oil will keep its unique properties over the years to maintain that same ride quality. This is crucial to the quality and longevity of the strut. Poor quality suspension setups use cheaper oil that can become frothy, lose its strength and degrade overtime. These inferior suspension systems will lose their fluid movement and\/or become too soft. We finish the strut piston with longstanding, high-heat rated double seals that are designed to take abuse without breaking a sweat, literally. No leaking struts here. The strut is the most important part of any suspension system. It determines the ride quality and the overall feel. We do not just use a stiffer spring at the suspension to compensate for a poor quality strut; instead we made sure to start from scratch and build a complete coilover that will differentiate itself from the rest.\u003c\/p\u003e\n\u003cp\u003eNext we pair the struts with a high-tensile strength steel spring that is designed to last without sagging or premature wear. Springs are tested to ensure there is no coil bind and full range of motion. The high quality strut and dampening allows us to use the proper spring rates needed for each setup that will complement the adjustable dampening rates. Each spring is mounted on adjustable aluminum perches that can be used to adjust preload and travel. Incorporated washer and spacers are in place to keep the system free moving especially on McPherson style struts.\u003c\/p\u003e\n\u003cp\u003eThe coilover system is finished with a combination of powder coating, electroplating, and anodizing to give it a great look and protect it. McPherson style struts feature adjustable upper camber plates and pillow ball mounts.\u003c\/p\u003e","brand":"TrackOne Development","offers":[{"title":"Default Title","offer_id":42176013369422,"sku":"T1-11-1620","price":1094.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/9484\/5518\/files\/T1-11-1620-DodgeChallenger_08_-Charger_06-10_-1WM.jpg?v=1737562067"},{"product_id":"mitsubishi-evo-7-8-9-01-07","title":"Mitsubishi Evo 7\/8\/9 (01-07)","description":"\u003cp\u003e\u003cstrong\u003eT1-11-1550\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMitsubishi Lancer Evo 7\/8\/9 (2001-2007)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpring Rate -\u003c\/strong\u003e Front 8K \/ Rear 7K \u003c\/p\u003e\n\u003cp\u003eStreet Coilovers are designed to give you the best ride quality without sacrificing any comfort or reliability. Our goal was to design a suspension setup that is reliable for daily driving while providing an enjoyable sporty ride that could be driven on the track.  All setups feature adjustable ride height and 32way or 12way dampening to adapt the ride to your preference. We spent a lot of time sourcing the best components and brought them all together with the help of a reputable engineering company that was up for the task.\u003c\/p\u003e\n\u003cp\u003eStarting with the strut, we invested a lot of time to ensure that they are both durable and reliable. We start with a durable heat-treated steel piston and needle valve to ensure proper travel and linear compression ratio. The strut body is designed to handle the heat and the life cycle it will be put through. Each strut is filled with proprietary oil that is designed to maintain its viscosity even under increased heat or abuse. The oil will keep its unique properties over the years to maintain that same ride quality. This is crucial to the quality and longevity of the strut. Poor quality suspension setups use cheaper oil that can become frothy, lose its strength and degrade overtime. These inferior suspension systems will lose their fluid movement and\/or become too soft. We finish the strut piston with longstanding, high-heat rated double seals that are designed to take abuse without breaking a sweat, literally. No leaking struts here. The strut is the most important part of any suspension system. It determines the ride quality and the overall feel. We do not just use a stiffer spring at the suspension to compensate for a poor quality strut; instead we made sure to start from scratch and build a complete coilover that will differentiate itself from the rest.\u003c\/p\u003e\n\u003cp\u003eNext we pair the struts with a high-tensile strength steel spring that is designed to last without sagging or premature wear. Springs are tested to ensure there is no coil bind and full range of motion. The high quality strut and dampening allows us to use the proper spring rates needed for each setup that will complement the adjustable dampening rates. Each spring is mounted on adjustable aluminum perches that can be used to adjust preload and travel. Incorporated washer and spacers are in place to keep the system free moving especially on McPherson style struts.\u003c\/p\u003e\n\u003cp\u003eThe coilover system is finished with a combination of powder coating, electroplating, and anodizing to give it a great look and protect it. McPherson style struts feature adjustable upper camber plates and pillow ball mounts.\u003c\/p\u003e","brand":"TrackOne Development","offers":[{"title":"Default Title","offer_id":42176013402190,"sku":"T1-11-1550","price":1094.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/9484\/5518\/files\/Track_One_-_Mitsubishi_EVO_8_9_-_T1-11-1550_-_1_WM__57639.jpg?v=1737562066"},{"product_id":"mazda-6-14-21","title":"Mazda 6 (14-21)","description":"\u003cp\u003e\u003cstrong\u003eT1-11-1450\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMazda 6 (2014-2021)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpring Rate -\u003c\/strong\u003e Front 8K \/ Rear 5K \u003c\/p\u003e\n\u003cp\u003eStreet Coilovers are designed to give you the best ride quality without sacrificing any comfort or reliability. Our goal was to design a suspension setup that is reliable for daily driving while providing an enjoyable sporty ride that could be driven on the track.  All setups feature adjustable ride height and 32way or 12way dampening to adapt the ride to your preference. We spent a lot of time sourcing the best components and brought them all together with the help of a reputable engineering company that was up for the task.\u003c\/p\u003e\n\u003cp\u003eStarting with the strut, we invested a lot of time to ensure that they are both durable and reliable. We start with a durable heat-treated steel piston and needle valve to ensure proper travel and linear compression ratio. The strut body is designed to handle the heat and the life cycle it will be put through. Each strut is filled with proprietary oil that is designed to maintain its viscosity even under increased heat or abuse. The oil will keep its unique properties over the years to maintain that same ride quality. This is crucial to the quality and longevity of the strut. Poor quality suspension setups use cheaper oil that can become frothy, lose its strength and degrade overtime. These inferior suspension systems will lose their fluid movement and\/or become too soft. We finish the strut piston with longstanding, high-heat rated double seals that are designed to take abuse without breaking a sweat, literally. No leaking struts here. The strut is the most important part of any suspension system. It determines the ride quality and the overall feel. We do not just use a stiffer spring at the suspension to compensate for a poor quality strut; instead we made sure to start from scratch and build a complete coilover that will differentiate itself from the rest.\u003c\/p\u003e\n\u003cp\u003eNext we pair the struts with a high-tensile strength steel spring that is designed to last without sagging or premature wear. Springs are tested to ensure there is no coil bind and full range of motion. The high quality strut and dampening allows us to use the proper spring rates needed for each setup that will complement the adjustable dampening rates. Each spring is mounted on adjustable aluminum perches that can be used to adjust preload and travel. Incorporated washer and spacers are in place to keep the system free moving especially on McPherson style struts.\u003c\/p\u003e\n\u003cp\u003eThe coilover system is finished with a combination of powder coating, electroplating, and anodizing to give it a great look and protect it. McPherson style struts feature adjustable upper camber plates and pillow ball mounts.\u003c\/p\u003e","brand":"TrackOne Development","offers":[{"title":"Default Title","offer_id":42176013467726,"sku":"T1-11-1450","price":1094.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/9484\/5518\/files\/T1-11-1450-Mazda6_2014-2021_-1WM.jpg?v=1737562067"},{"product_id":"mazda-6-09-11-4wd","title":"Mazda 6 (09-11) -4WD","description":"\u003cp\u003e\u003cstrong\u003eT1-11-1440\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMazda 6 4WD (2009-2011)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpring Rate -\u003c\/strong\u003e Front 14K \/ Rear 8K \u003c\/p\u003e\n\u003cp\u003eStreet Coilovers are designed to give you the best ride quality without sacrificing any comfort or reliability. Our goal was to design a suspension setup that is reliable for daily driving while providing an enjoyable sporty ride that could be driven on the track.  All setups feature adjustable ride height and 32way or 12way dampening to adapt the ride to your preference. We spent a lot of time sourcing the best components and brought them all together with the help of a reputable engineering company that was up for the task.\u003c\/p\u003e\n\u003cp\u003eStarting with the strut, we invested a lot of time to ensure that they are both durable and reliable. We start with a durable heat-treated steel piston and needle valve to ensure proper travel and linear compression ratio. The strut body is designed to handle the heat and the life cycle it will be put through. Each strut is filled with proprietary oil that is designed to maintain its viscosity even under increased heat or abuse. The oil will keep its unique properties over the years to maintain that same ride quality. This is crucial to the quality and longevity of the strut. Poor quality suspension setups use cheaper oil that can become frothy, lose its strength and degrade overtime. These inferior suspension systems will lose their fluid movement and\/or become too soft. We finish the strut piston with longstanding, high-heat rated double seals that are designed to take abuse without breaking a sweat, literally. No leaking struts here. The strut is the most important part of any suspension system. It determines the ride quality and the overall feel. We do not just use a stiffer spring at the suspension to compensate for a poor quality strut; instead we made sure to start from scratch and build a complete coilover that will differentiate itself from the rest.\u003c\/p\u003e\n\u003cp\u003eNext we pair the struts with a high-tensile strength steel spring that is designed to last without sagging or premature wear. Springs are tested to ensure there is no coil bind and full range of motion. The high quality strut and dampening allows us to use the proper spring rates needed for each setup that will complement the adjustable dampening rates. Each spring is mounted on adjustable aluminum perches that can be used to adjust preload and travel. Incorporated washer and spacers are in place to keep the system free moving especially on McPherson style struts.\u003c\/p\u003e\n\u003cp\u003eThe coilover system is finished with a combination of powder coating, electroplating, and anodizing to give it a great look and protect it. McPherson style struts feature adjustable upper camber plates and pillow ball mounts.\u003c\/p\u003e","brand":"TrackOne Development","offers":[{"title":"Default Title","offer_id":42176013336654,"sku":"T1-11-1440","price":1094.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/9484\/5518\/files\/T1-11-1430-Mazda62WD-1WM_03e1b431-490b-4801-b23d-1cecea587f70.jpg?v=1737562067"},{"product_id":"bmw-3-series-e90-rwd-06-11-non-m-model","title":"BMW 3 Series E90 RWD (06-11) - Non M Model","description":"\u003cp\u003e\u003cstrong\u003eT1-11-1750\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBMW 3 Series 2WD -E90 Sedan (2005+)\u003c\/p\u003e\n\u003cp\u003eBMW E91 Sation Wagon (2005+)\u003c\/p\u003e\n\u003cp\u003eBMW E92 Coupe (2006+)\u003c\/p\u003e\n\u003cp\u003eBMW E93 Convertible (2007+)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpring Rate -\u003c\/strong\u003e Front 8K \/ Rear 13K \u003c\/p\u003e\n\u003cp\u003eStreet Coilovers are designed to give you the best ride quality without sacrificing any comfort or reliability. Our goal was to design a suspension setup that is reliable for daily driving while providing an enjoyable sporty ride that could be driven on the track.  All setups feature adjustable ride height and 32way or 12way dampening to adapt the ride to your preference. We spent a lot of time sourcing the best components and brought them all together with the help of a reputable engineering company that was up for the task.\u003c\/p\u003e\n\u003cp\u003eStarting with the strut, we invested a lot of time to ensure that they are both durable and reliable. We start with a durable heat-treated steel piston and needle valve to ensure proper travel and linear compression ratio. The strut body is designed to handle the heat and the life cycle it will be put through. Each strut is filled with proprietary oil that is designed to maintain its viscosity even under increased heat or abuse. The oil will keep its unique properties over the years to maintain that same ride quality. This is crucial to the quality and longevity of the strut. Poor quality suspension setups use cheaper oil that can become frothy, lose its strength and degrade overtime. These inferior suspension systems will lose their fluid movement and\/or become too soft. We finish the strut piston with longstanding, high-heat rated double seals that are designed to take abuse without breaking a sweat, literally. No leaking struts here. The strut is the most important part of any suspension system. It determines the ride quality and the overall feel. We do not just use a stiffer spring at the suspension to compensate for a poor quality strut; instead we made sure to start from scratch and build a complete coilover that will differentiate itself from the rest.\u003c\/p\u003e\n\u003cp\u003eNext we pair the struts with a high-tensile strength steel spring that is designed to last without sagging or premature wear. Springs are tested to ensure there is no coil bind and full range of motion. The high quality strut and dampening allows us to use the proper spring rates needed for each setup that will complement the adjustable dampening rates. Each spring is mounted on adjustable aluminum perches that can be used to adjust preload and travel. Incorporated washer and spacers are in place to keep the system free moving especially on McPherson style struts.\u003c\/p\u003e\n\u003cp\u003eThe coilover system is finished with a combination of powder coating, electroplating, and anodizing to give it a great look and protect it. McPherson style struts feature adjustable upper camber plates and pillow ball mounts.\u003c\/p\u003e","brand":"TrackOne Development","offers":[{"title":"Default Title","offer_id":42176013729870,"sku":"T1-11-1750","price":1094.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/9484\/5518\/files\/T1-11-1750-BMW3Series2WD-1WM.jpg?v=1737562071"},{"product_id":"lexus-is300-98-05","title":"Lexus IS300 (98-05)","description":"\u003cp\u003e\u003cstrong\u003eT1-11-1780\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eLexus IS (1998-2005)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpring Rate -\u003c\/strong\u003e Front 12K \/ Rear 14K\u003c\/p\u003e\n\u003cp\u003eStreet Coilovers are designed to give you the best ride quality without sacrificing any comfort or reliability. Our goal was to design a suspension setup that is reliable for daily driving while providing an enjoyable sporty ride that could be driven on the track.  All setups feature adjustable ride height and 32way or 12way dampening to adapt the ride to your preference. We spent a lot of time sourcing the best components and brought them all together with the help of a reputable engineering company that was up for the task.\u003c\/p\u003e\n\u003cp\u003eStarting with the strut, we invested a lot of time to ensure that they are both durable and reliable. We start with a durable heat-treated steel piston and needle valve to ensure proper travel and linear compression ratio. The strut body is designed to handle the heat and the life cycle it will be put through. Each strut is filled with proprietary oil that is designed to maintain its viscosity even under increased heat or abuse. The oil will keep its unique properties over the years to maintain that same ride quality. This is crucial to the quality and longevity of the strut. Poor quality suspension setups use cheaper oil that can become frothy, lose its strength and degrade overtime. These inferior suspension systems will lose their fluid movement and\/or become too soft. We finish the strut piston with longstanding, high-heat rated double seals that are designed to take abuse without breaking a sweat, literally. No leaking struts here. The strut is the most important part of any suspension system. It determines the ride quality and the overall feel. We do not just use a stiffer spring at the suspension to compensate for a poor quality strut; instead we made sure to start from scratch and build a complete coilover that will differentiate itself from the rest.\u003c\/p\u003e\n\u003cp\u003eNext we pair the struts with a high-tensile strength steel spring that is designed to last without sagging or premature wear. Springs are tested to ensure there is no coil bind and full range of motion. The high quality strut and dampening allows us to use the proper spring rates needed for each setup that will complement the adjustable dampening rates. Each spring is mounted on adjustable aluminum perches that can be used to adjust preload and travel. Incorporated washer and spacers are in place to keep the system free moving especially on McPherson style struts.\u003c\/p\u003e\n\u003cp\u003eThe coilover system is finished with a combination of powder coating, electroplating, and anodizing to give it a great look and protect it. McPherson style struts feature adjustable upper camber plates and pillow ball mounts.\u003c\/p\u003e","brand":"TrackOne Development","offers":[{"title":"Default Title","offer_id":42176013697102,"sku":"T1-11-1780","price":1094.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/9484\/5518\/files\/T1-11-1780-LexusIS200_99-05_-1WM.jpg?v=1737562071"},{"product_id":"bmw-3-series-e46-98-05","title":"BMW 3 Series E46 (98-05)","description":"\u003cp\u003e\u003cstrong\u003eT1-11-1740\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003eBMW 3 Series E46 (1998-2005) \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpring Rate - \u003c\/strong\u003eFront 8K \/ Rear 10K  \u003c\/p\u003e\n\u003cp\u003eStreet Coilovers are designed to give you the best ride quality without sacrificing any comfort or reliability. Our goal was to design a suspension setup that is reliable for daily driving while providing an enjoyable sporty ride that could be driven on the track.  All setups feature adjustable ride height and 32way or 12way dampening to adapt the ride to your preference. We spent a lot of time sourcing the best components and brought them all together with the help of a reputable engineering company that was up for the task.\u003c\/p\u003e\n\u003cp\u003eStarting with the strut, we invested a lot of time to ensure that they are both durable and reliable. We start with a durable heat-treated steel piston and needle valve to ensure proper travel and linear compression ratio. The strut body is designed to handle the heat and the life cycle it will be put through. Each strut is filled with proprietary oil that is designed to maintain its viscosity even under increased heat or abuse. The oil will keep its unique properties over the years to maintain that same ride quality. This is crucial to the quality and longevity of the strut. Poor quality suspension setups use cheaper oil that can become frothy, lose its strength and degrade overtime. These inferior suspension systems will lose their fluid movement and\/or become too soft. We finish the strut piston with longstanding, high-heat rated double seals that are designed to take abuse without breaking a sweat, literally. No leaking struts here. The strut is the most important part of any suspension system. It determines the ride quality and the overall feel. We do not just use a stiffer spring at the suspension to compensate for a poor quality strut; instead we made sure to start from scratch and build a complete coilover that will differentiate itself from the rest.\u003c\/p\u003e\n\u003cp\u003eNext we pair the struts with a high-tensile strength steel spring that is designed to last without sagging or premature wear. Springs are tested to ensure there is no coil bind and full range of motion. The high quality strut and dampening allows us to use the proper spring rates needed for each setup that will complement the adjustable dampening rates. Each spring is mounted on adjustable aluminum perches that can be used to adjust preload and travel. Incorporated washer and spacers are in place to keep the system free moving especially on McPherson style struts.\u003c\/p\u003e\n\u003cp\u003eThe coilover system is finished with a combination of powder coating, electroplating, and anodizing to give it a great look and protect it. McPherson style struts feature adjustable upper camber plates and pillow ball mounts.\u003c\/p\u003e","brand":"TrackOne Development","offers":[{"title":"Default Title","offer_id":42176013762638,"sku":"T1-11-1740","price":1094.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/9484\/5518\/files\/Track_One_-_T1-11-E46_-_BMW_E46_98-05_-_1_WM__23695.jpg?v=1737562071"},{"product_id":"bmw-3-series-e90-awd-06-11","title":"BMW 3 Series E90 AWD (06-11)","description":"\u003cp\u003e\u003cstrong\u003eT1-11-1760\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBMW 3 Series 4WD\u003c\/p\u003e\n\u003cp\u003eE90 Sedan (2005+)\u003c\/p\u003e\n\u003cp\u003eE91 Station Wagon (2005+)\u003c\/p\u003e\n\u003cp\u003eE92 Coupe (2006+)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpring Rate - \u003c\/strong\u003eFront 8K \/ Rear 13K  \u003c\/p\u003e\n\u003cp\u003eStreet Coilovers are designed to give you the best ride quality without sacrificing any comfort or reliability. Our goal was to design a suspension setup that is reliable for daily driving while providing an enjoyable sporty ride that could be driven on the track.  All setups feature adjustable ride height and 32way or 12way dampening to adapt the ride to your preference. We spent a lot of time sourcing the best components and brought them all together with the help of a reputable engineering company that was up for the task.\u003c\/p\u003e\n\u003cp\u003eStarting with the strut, we invested a lot of time to ensure that they are both durable and reliable. We start with a durable heat-treated steel piston and needle valve to ensure proper travel and linear compression ratio. The strut body is designed to handle the heat and the life cycle it will be put through. Each strut is filled with proprietary oil that is designed to maintain its viscosity even under increased heat or abuse. The oil will keep its unique properties over the years to maintain that same ride quality. This is crucial to the quality and longevity of the strut. Poor quality suspension setups use cheaper oil that can become frothy, lose its strength and degrade overtime. These inferior suspension systems will lose their fluid movement and\/or become too soft. We finish the strut piston with longstanding, high-heat rated double seals that are designed to take abuse without breaking a sweat, literally. No leaking struts here. The strut is the most important part of any suspension system. It determines the ride quality and the overall feel. We do not just use a stiffer spring at the suspension to compensate for a poor quality strut; instead we made sure to start from scratch and build a complete coilover that will differentiate itself from the rest.\u003c\/p\u003e\n\u003cp\u003eNext we pair the struts with a high-tensile strength steel spring that is designed to last without sagging or premature wear. Springs are tested to ensure there is no coil bind and full range of motion. The high quality strut and dampening allows us to use the proper spring rates needed for each setup that will complement the adjustable dampening rates. Each spring is mounted on adjustable aluminum perches that can be used to adjust preload and travel. Incorporated washer and spacers are in place to keep the system free moving especially on McPherson style struts.\u003c\/p\u003e\n\u003cp\u003eThe coilover system is finished with a combination of powder coating, electroplating, and anodizing to give it a great look and protect it. McPherson style struts feature adjustable upper camber plates and pillow ball mounts.\u003c\/p\u003e","brand":"TrackOne Development","offers":[{"title":"Default Title","offer_id":42176013795406,"sku":"T1-11-1760","price":1094.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/9484\/5518\/files\/Track_One_-_T1-11-1760_-_BMW_3-Series_E90_E91_E92_4WD_-_1_WM__55925.jpg?v=1737562071"},{"product_id":"lexus-is250-06-12-rwd","title":"Lexus IS250 (06-12) - RWD","description":"\u003cp\u003e\u003cstrong\u003eT1-11-1790\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eLexus IS250 GSE20 (2006-2012) - RWD Only\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpring Rate - \u003c\/strong\u003eFront 14K \/ Rear 8K  \u003c\/p\u003e\n\u003cp\u003eStreet Coilovers are designed to give you the best ride quality without sacrificing any comfort or reliability. Our goal was to design a suspension setup that is reliable for daily driving while providing an enjoyable sporty ride that could be driven on the track.  All setups feature adjustable ride height and 32way or 12way dampening to adapt the ride to your preference. We spent a lot of time sourcing the best components and brought them all together with the help of a reputable engineering company that was up for the task.\u003c\/p\u003e\n\u003cp\u003eStarting with the strut, we invested a lot of time to ensure that they are both durable and reliable. We start with a durable heat-treated steel piston and needle valve to ensure proper travel and linear compression ratio. The strut body is designed to handle the heat and the life cycle it will be put through. Each strut is filled with proprietary oil that is designed to maintain its viscosity even under increased heat or abuse. The oil will keep its unique properties over the years to maintain that same ride quality. This is crucial to the quality and longevity of the strut. Poor quality suspension setups use cheaper oil that can become frothy, lose its strength and degrade overtime. These inferior suspension systems will lose their fluid movement and\/or become too soft. We finish the strut piston with longstanding, high-heat rated double seals that are designed to take abuse without breaking a sweat, literally. No leaking struts here. The strut is the most important part of any suspension system. It determines the ride quality and the overall feel. We do not just use a stiffer spring at the suspension to compensate for a poor quality strut; instead we made sure to start from scratch and build a complete coilover that will differentiate itself from the rest.\u003c\/p\u003e\n\u003cp\u003eNext we pair the struts with a high-tensile strength steel spring that is designed to last without sagging or premature wear. Springs are tested to ensure there is no coil bind and full range of motion. The high quality strut and dampening allows us to use the proper spring rates needed for each setup that will complement the adjustable dampening rates. Each spring is mounted on adjustable aluminum perches that can be used to adjust preload and travel. Incorporated washer and spacers are in place to keep the system free moving especially on McPherson style struts.\u003c\/p\u003e\n\u003cp\u003eThe coilover system is finished with a combination of powder coating, electroplating, and anodizing to give it a great look and protect it. McPherson style struts feature adjustable upper camber plates and pillow ball mounts.\u003c\/p\u003e","brand":"TrackOne Development","offers":[{"title":"Default Title","offer_id":42176013664334,"sku":"T1-11-1790","price":1094.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/9484\/5518\/files\/T1-11-1790-LexusIS250-300_06-12_-1WM.jpg?v=1737562071"},{"product_id":"audi-a4-b8-awd-08-16","title":"Audi A4 B8 AWD (08-16)","description":"\u003cp\u003e\u003cstrong\u003eT1-11-1810\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAudi B8 4WD Audi A4 Sedan (2008+)\u003c\/p\u003e\n\u003cp\u003eAudi A4 Avant Station Wagon (2008+)\u003c\/p\u003e\n\u003cp\u003eAudi A5 Coupe (2007+)\u003c\/p\u003e\n\u003cp\u003eAudi A5 Convretible (2009+)\u003c\/p\u003e\n\u003cp\u003eAudi A5 Sportback (2009+)\u003c\/p\u003e\n\u003cp\u003eAudi RS5 Coupe \/ Cabriolet 8T (2010-15)\u003c\/p\u003e\n\u003cp\u003eAudi Q5 8R (2008-16)\u003c\/p\u003e\n\u003cp\u003eAudi S4 Sedan (2008+)\u003c\/p\u003e\n\u003cp\u003eAudi S4 Avant Station Wagon (2008+)\u003c\/p\u003e\n\u003cp\u003eAudi S5 (2008+)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpring Rate - \u003c\/strong\u003e Front 12K \/ Rear 10K \u003c\/p\u003e\n\u003cp\u003eStreet Coilovers are designed to give you the best ride quality without sacrificing any comfort or reliability. Our goal was to design a suspension setup that is reliable for daily driving while providing an enjoyable sporty ride that could be driven on the track.  All setups feature adjustable ride height and 32way or 12way dampening to adapt the ride to your preference. We spent a lot of time sourcing the best components and brought them all together with the help of a reputable engineering company that was up for the task.\u003c\/p\u003e\n\u003cp\u003eStarting with the strut, we invested a lot of time to ensure that they are both durable and reliable. We start with a durable heat-treated steel piston and needle valve to ensure proper travel and linear compression ratio. The strut body is designed to handle the heat and the life cycle it will be put through. Each strut is filled with proprietary oil that is designed to maintain its viscosity even under increased heat or abuse. The oil will keep its unique properties over the years to maintain that same ride quality. This is crucial to the quality and longevity of the strut. Poor quality suspension setups use cheaper oil that can become frothy, lose its strength and degrade overtime. These inferior suspension systems will lose their fluid movement and\/or become too soft. We finish the strut piston with longstanding, high-heat rated double seals that are designed to take abuse without breaking a sweat, literally. No leaking struts here. The strut is the most important part of any suspension system. It determines the ride quality and the overall feel. We do not just use a stiffer spring at the suspension to compensate for a poor quality strut; instead we made sure to start from scratch and build a complete coilover that will differentiate itself from the rest.\u003c\/p\u003e\n\u003cp\u003eNext we pair the struts with a high-tensile strength steel spring that is designed to last without sagging or premature wear. Springs are tested to ensure there is no coil bind and full range of motion. The high quality strut and dampening allows us to use the proper spring rates needed for each setup that will complement the adjustable dampening rates. Each spring is mounted on adjustable aluminum perches that can be used to adjust preload and travel. Incorporated washer and spacers are in place to keep the system free moving especially on McPherson style struts.\u003c\/p\u003e\n\u003cp\u003eThe coilover system is finished with a combination of powder coating, electroplating, and anodizing to give it a great look and protect it. McPherson style struts feature adjustable upper camber plates and pillow ball mounts.\u003c\/p\u003e","brand":"TrackOne Development","offers":[{"title":"Default Title","offer_id":42176013992014,"sku":"T1-11-1810","price":1094.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/9484\/5518\/files\/TrackOne-T1-11-1810AudiA4_08-16_AWD-1WM.jpg?v=1737562076"},{"product_id":"audi-a4-b9-2wd-17","title":"Audi A4 B9 2WD (17+)","description":"\u003cp\u003e\u003cstrong\u003eT1-11-1820 \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAudi A4 B9 2WD (2017+) \u003cspan data-mce-fragment=\"1\"\u003e(53mm Strut Diameter)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpring Rate\u003c\/strong\u003e - Front 10K \/ Rear 8K \u003c\/p\u003e\n\u003cp\u003eStreet Coilovers are designed to give you the best ride quality without sacrificing any comfort or reliability. Our goal was to design a suspension setup that is reliable for daily driving while providing an enjoyable sporty ride that could be driven on the track.  All setups feature adjustable ride height and 32way or 12way dampening to adapt the ride to your preference. We spent a lot of time sourcing the best components and brought them all together with the help of a reputable engineering company that was up for the task.\u003c\/p\u003e\n\u003cp\u003eStarting with the strut, we invested a lot of time to ensure that they are both durable and reliable. We start with a durable heat-treated steel piston and needle valve to ensure proper travel and linear compression ratio. The strut body is designed to handle the heat and the life cycle it will be put through. Each strut is filled with proprietary oil that is designed to maintain its viscosity even under increased heat or abuse. The oil will keep its unique properties over the years to maintain that same ride quality. This is crucial to the quality and longevity of the strut. Poor quality suspension setups use cheaper oil that can become frothy, lose its strength and degrade overtime. These inferior suspension systems will lose their fluid movement and\/or become too soft. We finish the strut piston with longstanding, high-heat rated double seals that are designed to take abuse without breaking a sweat, literally. No leaking struts here. The strut is the most important part of any suspension system. It determines the ride quality and the overall feel. We do not just use a stiffer spring at the suspension to compensate for a poor quality strut; instead we made sure to start from scratch and build a complete coilover that will differentiate itself from the rest.\u003c\/p\u003e\n\u003cp\u003eNext we pair the struts with a high-tensile strength steel spring that is designed to last without sagging or premature wear. Springs are tested to ensure there is no coil bind and full range of motion. The high quality strut and dampening allows us to use the proper spring rates needed for each setup that will complement the adjustable dampening rates. Each spring is mounted on adjustable aluminum perches that can be used to adjust preload and travel. Incorporated washer and spacers are in place to keep the system free moving especially on McPherson style struts.\u003c\/p\u003e\n\u003cp\u003eThe coilover system is finished with a combination of powder coating, electroplating, and anodizing to give it a great look and protect it. McPherson style struts feature adjustable upper camber plates and pillow ball mounts.\u003c\/p\u003e","brand":"TrackOne Development","offers":[{"title":"Default Title","offer_id":42176014090318,"sku":null,"price":1094.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/9484\/5518\/files\/T1-11-1800-1WM_e576d1b3-9895-4700-84f3-517ed4dbcfd2.jpg?v=1737562075"},{"product_id":"vw-golf-mk5-04-09","title":"VW Golf MK5 (04-09)","description":"\u003cp\u003e\u003cstrong\u003eT1-11-1350\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eVolkswagen Golf MK5 2WD (2004-2009)\u003cspan data-mce-fragment=\"1\"\u003e- 50mm Front Strut Diameter\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003cstrong\u003eSpring Rate -\u003c\/strong\u003e Front 8K \/ Rear 5K \u003c\/p\u003e\n\u003cp\u003eStreet Coilovers are designed to give you the best ride quality without sacrificing any comfort or reliability. Our goal was to design a suspension setup that is reliable for daily driving while providing an enjoyable sporty ride that could be driven on the track.  All setups feature adjustable ride height and 32way or 12way dampening to adapt the ride to your preference. We spent a lot of time sourcing the best components and brought them all together with the help of a reputable engineering company that was up for the task.\u003c\/p\u003e\n\u003cp\u003eStarting with the strut, we invested a lot of time to ensure that they are both durable and reliable. We start with a durable heat-treated steel piston and needle valve to ensure proper travel and linear compression ratio. The strut body is designed to handle the heat and the life cycle it will be put through. Each strut is filled with proprietary oil that is designed to maintain its viscosity even under increased heat or abuse. The oil will keep its unique properties over the years to maintain that same ride quality. This is crucial to the quality and longevity of the strut. Poor quality suspension setups use cheaper oil that can become frothy, lose its strength and degrade overtime. These inferior suspension systems will lose their fluid movement and\/or become too soft. We finish the strut piston with longstanding, high-heat rated double seals that are designed to take abuse without breaking a sweat, literally. No leaking struts here. The strut is the most important part of any suspension system. It determines the ride quality and the overall feel. We do not just use a stiffer spring at the suspension to compensate for a poor quality strut; instead we made sure to start from scratch and build a complete coilover that will differentiate itself from the rest.\u003c\/p\u003e\n\u003cp\u003eNext we pair the struts with a high-tensile strength steel spring that is designed to last without sagging or premature wear. Springs are tested to ensure there is no coil bind and full range of motion. The high quality strut and dampening allows us to use the proper spring rates needed for each setup that will complement the adjustable dampening rates. Each spring is mounted on adjustable aluminum perches that can be used to adjust preload and travel. Incorporated washer and spacers are in place to keep the system free moving especially on McPherson style struts.\u003c\/p\u003e\n\u003cp\u003eThe coilover system is finished with a combination of powder coating, electroplating, and anodizing to give it a great look and protect it. McPherson style struts feature adjustable upper camber plates and pillow ball mounts.\u003c\/p\u003e","brand":"TrackOne Development","offers":[{"title":"Default Title","offer_id":42176014024782,"sku":"T1-11-1350","price":1094.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/9484\/5518\/files\/T1-11-1350-Golf5-6_AudiA3-50mm-1WM.jpg?v=1737562076"},{"product_id":"mazda-miata-nc-06-14","title":"Mazda Miata NC (06-14)","description":"\u003cp\u003e\u003cstrong\u003eT1-11-1680\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMazda Miata (2006-2014)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpring Rate -\u003c\/strong\u003e Front 7K \/ Rear 6K   \u003c\/p\u003e\n\u003cp\u003eStreet Coilovers are designed to give you the best ride quality without sacrificing any comfort or reliability. Our goal was to design a suspension setup that is reliable for daily driving while providing an enjoyable sporty ride that could be driven on the track.  All setups feature adjustable ride height and 32way or 12way dampening to adapt the ride to your preference. We spent a lot of time sourcing the best components and brought them all together with the help of a reputable engineering company that was up for the task.\u003c\/p\u003e\n\u003cp\u003eStarting with the strut, we invested a lot of time to ensure that they are both durable and reliable. We start with a durable heat-treated steel piston and needle valve to ensure proper travel and linear compression ratio. The strut body is designed to handle the heat and the life cycle it will be put through. Each strut is filled with proprietary oil that is designed to maintain its viscosity even under increased heat or abuse. The oil will keep its unique properties over the years to maintain that same ride quality. This is crucial to the quality and longevity of the strut. Poor quality suspension setups use cheaper oil that can become frothy, lose its strength and degrade overtime. These inferior suspension systems will lose their fluid movement and\/or become too soft. We finish the strut piston with longstanding, high-heat rated double seals that are designed to take abuse without breaking a sweat, literally. No leaking struts here. The strut is the most important part of any suspension system. It determines the ride quality and the overall feel. We do not just use a stiffer spring at the suspension to compensate for a poor quality strut; instead we made sure to start from scratch and build a complete coilover that will differentiate itself from the rest.\u003c\/p\u003e\n\u003cp\u003eNext we pair the struts with a high-tensile strength steel spring that is designed to last without sagging or premature wear. Springs are tested to ensure there is no coil bind and full range of motion. The high quality strut and dampening allows us to use the proper spring rates needed for each setup that will complement the adjustable dampening rates. Each spring is mounted on adjustable aluminum perches that can be used to adjust preload and travel. Incorporated washer and spacers are in place to keep the system free moving especially on McPherson style struts.\u003c\/p\u003e\n\u003cp\u003eThe coilover system is finished with a combination of powder coating, electroplating, and anodizing to give it a great look and protect it. McPherson style struts feature adjustable upper camber plates and pillow ball mounts.\u003c\/p\u003e","brand":"TrackOne Development","offers":[{"title":"Default Title","offer_id":42176014123086,"sku":"T1-11-1680","price":1094.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/9484\/5518\/files\/T1-11-1680-MazdaMiata_06-14_-1WM.jpg?v=1737562075"},{"product_id":"audi-a4-b9-awd-17","title":"Audi A4 B9 AWD (17+)","description":"\u003cp\u003e\u003cstrong\u003eT1-11-1830 \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAudi A4 B9 4WD (2017+) (53mm Strut Diameter)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpring Rate\u003c\/strong\u003e - Front 10K \/ Rear 10K \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eStreet Coilovers are designed to give you the best ride quality without sacrificing any comfort or reliability. Our goal was to design a suspension setup that is reliable for daily driving while providing an enjoyable sporty ride that could be driven on the track.  All setups feature adjustable ride height and 32way or 12way dampening to adapt the ride to your preference. We spent a lot of time sourcing the best components and brought them all together with the help of a reputable engineering company that was up for the task.\u003c\/p\u003e\n\u003cp\u003eStarting with the strut, we invested a lot of time to ensure that they are both durable and reliable. We start with a durable heat-treated steel piston and needle valve to ensure proper travel and linear compression ratio. The strut body is designed to handle the heat and the life cycle it will be put through. Each strut is filled with proprietary oil that is designed to maintain its viscosity even under increased heat or abuse. The oil will keep its unique properties over the years to maintain that same ride quality. This is crucial to the quality and longevity of the strut. Poor quality suspension setups use cheaper oil that can become frothy, lose its strength and degrade overtime. These inferior suspension systems will lose their fluid movement and\/or become too soft. We finish the strut piston with longstanding, high-heat rated double seals that are designed to take abuse without breaking a sweat, literally. No leaking struts here. The strut is the most important part of any suspension system. It determines the ride quality and the overall feel. We do not just use a stiffer spring at the suspension to compensate for a poor quality strut; instead we made sure to start from scratch and build a complete coilover that will differentiate itself from the rest.\u003c\/p\u003e\n\u003cp\u003eNext we pair the struts with a high-tensile strength steel spring that is designed to last without sagging or premature wear. Springs are tested to ensure there is no coil bind and full range of motion. The high quality strut and dampening allows us to use the proper spring rates needed for each setup that will complement the adjustable dampening rates. Each spring is mounted on adjustable aluminum perches that can be used to adjust preload and travel. Incorporated washer and spacers are in place to keep the system free moving especially on McPherson style struts.\u003c\/p\u003e\n\u003cp\u003eThe coilover system is finished with a combination of powder coating, electroplating, and anodizing to give it a great look and protect it. McPherson style struts feature adjustable upper camber plates and pillow ball mounts.\u003c\/p\u003e","brand":"TrackOne Development","offers":[{"title":"Default Title","offer_id":42176014057550,"sku":"T1-11-1830","price":1094.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/9484\/5518\/files\/T1-11-1830-AudiA4AWD_17_-1WM.jpg?v=1737562076"},{"product_id":"chevrolet-corvette-c5-c6-97-13","title":"Chevrolet Corvette C5\/C6 (97-13)","description":"\u003cp\u003e\u003cstrong\u003eT1-11-1840\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eChevrolet Corvette C5\/C6 (1997-2013)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpring Rate - \u003c\/strong\u003eFront 7K \/ Rear 10K \u003c\/p\u003e\n\u003cp\u003eStreet Coilovers are designed to give you the best ride quality without sacrificing any comfort or reliability. Our goal was to design a suspension setup that is reliable for daily driving while providing an enjoyable sporty ride that could be driven on the track.  All setups feature adjustable ride height and 32way or 12way dampening to adapt the ride to your preference. We spent a lot of time sourcing the best components and brought them all together with the help of a reputable engineering company that was up for the task.\u003c\/p\u003e\n\u003cp\u003eStarting with the strut, we invested a lot of time to ensure that they are both durable and reliable. We start with a durable heat-treated steel piston and needle valve to ensure proper travel and linear compression ratio. The strut body is designed to handle the heat and the life cycle it will be put through. Each strut is filled with proprietary oil that is designed to maintain its viscosity even under increased heat or abuse. The oil will keep its unique properties over the years to maintain that same ride quality. This is crucial to the quality and longevity of the strut. Poor quality suspension setups use cheaper oil that can become frothy, lose its strength and degrade overtime. These inferior suspension systems will lose their fluid movement and\/or become too soft. We finish the strut piston with longstanding, high-heat rated double seals that are designed to take abuse without breaking a sweat, literally. No leaking struts here. The strut is the most important part of any suspension system. It determines the ride quality and the overall feel. We do not just use a stiffer spring at the suspension to compensate for a poor quality strut; instead we made sure to start from scratch and build a complete coilover that will differentiate itself from the rest.\u003c\/p\u003e\n\u003cp\u003eNext we pair the struts with a high-tensile strength steel spring that is designed to last without sagging or premature wear. Springs are tested to ensure there is no coil bind and full range of motion. The high quality strut and dampening allows us to use the proper spring rates needed for each setup that will complement the adjustable dampening rates. Each spring is mounted on adjustable aluminum perches that can be used to adjust preload and travel. Incorporated washer and spacers are in place to keep the system free moving especially on McPherson style struts.\u003c\/p\u003e\n\u003cp\u003eThe coilover system is finished with a combination of powder coating, electroplating, and anodizing to give it a great look and protect it. McPherson style struts feature adjustable upper camber plates and pillow ball mounts.\u003c\/p\u003e","brand":"TrackOne Development","offers":[{"title":"Default Title","offer_id":42176014352462,"sku":"T1-11-1840","price":1094.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/9484\/5518\/files\/T1-11-1840ChevyCovetteC5C6_97-13_-1WM.jpg?v=1737562080"},{"product_id":"subaru-impreza-wrx-08-14","title":"Subaru Impreza \/ WRX (08-14)","description":"\u003cp\u003e\u003cstrong\u003eT1-11-1300\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSubaru Impreza \/ WRX (2008-2014)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpring Rate -\u003c\/strong\u003e Front 8K \/ Rear 8K \u003c\/p\u003e\n\u003cp\u003eStreet Coilovers are designed to give you the best ride quality without sacrificing any comfort or reliability. Our goal was to design a suspension setup that is reliable for daily driving while providing an enjoyable sporty ride that could be driven on the track.  All setups feature adjustable ride height and 32way or 12way dampening to adapt the ride to your preference. We spent a lot of time sourcing the best components and brought them all together with the help of a reputable engineering company that was up for the task.\u003c\/p\u003e\n\u003cp\u003eStarting with the strut, we invested a lot of time to ensure that they are both durable and reliable. We start with a durable heat-treated steel piston and needle valve to ensure proper travel and linear compression ratio. The strut body is designed to handle the heat and the life cycle it will be put through. Each strut is filled with proprietary oil that is designed to maintain its viscosity even under increased heat or abuse. The oil will keep its unique properties over the years to maintain that same ride quality. This is crucial to the quality and longevity of the strut. Poor quality suspension setups use cheaper oil that can become frothy, lose its strength and degrade overtime. These inferior suspension systems will lose their fluid movement and\/or become too soft. We finish the strut piston with longstanding, high-heat rated double seals that are designed to take abuse without breaking a sweat, literally. No leaking struts here. The strut is the most important part of any suspension system. It determines the ride quality and the overall feel. We do not just use a stiffer spring at the suspension to compensate for a poor quality strut; instead we made sure to start from scratch and build a complete coilover that will differentiate itself from the rest.\u003c\/p\u003e\n\u003cp\u003eNext we pair the struts with a high-tensile strength steel spring that is designed to last without sagging or premature wear. Springs are tested to ensure there is no coil bind and full range of motion. The high quality strut and dampening allows us to use the proper spring rates needed for each setup that will complement the adjustable dampening rates. Each spring is mounted on adjustable aluminum perches that can be used to adjust preload and travel. Incorporated washer and spacers are in place to keep the system free moving especially on McPherson style struts.\u003c\/p\u003e\n\u003cp\u003eThe coilover system is finished with a combination of powder coating, electroplating, and anodizing to give it a great look and protect it. McPherson style struts feature adjustable upper camber plates and pillow ball mounts.\u003c\/p\u003e","brand":"TrackOne Development","offers":[{"title":"Default Title","offer_id":42176014450766,"sku":"T1-11-1300","price":1094.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/9484\/5518\/files\/T1-11-1300-SubaruImpreza_07-11_-1WM.jpg?v=1737562080"},{"product_id":"bmw-3-series-e36-92-98","title":"BMW 3 Series E36 (92-98)","description":"\u003cp\u003e\u003cstrong\u003eT1-11-1770\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBMW 3 Series E36 (1992-1998)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpring Rate - \u003c\/strong\u003eFront 7K \/ Rear 10K  \u003c\/p\u003e\n\u003cp\u003eStreet Coilovers are designed to give you the best ride quality without sacrificing any comfort or reliability. Our goal was to design a suspension setup that is reliable for daily driving while providing an enjoyable sporty ride that could be driven on the track.  All setups feature adjustable ride height and 32way or 12way dampening to adapt the ride to your preference. We spent a lot of time sourcing the best components and brought them all together with the help of a reputable engineering company that was up for the task.\u003c\/p\u003e\n\u003cp\u003eStarting with the strut, we invested a lot of time to ensure that they are both durable and reliable. We start with a durable heat-treated steel piston and needle valve to ensure proper travel and linear compression ratio. The strut body is designed to handle the heat and the life cycle it will be put through. Each strut is filled with proprietary oil that is designed to maintain its viscosity even under increased heat or abuse. The oil will keep its unique properties over the years to maintain that same ride quality. This is crucial to the quality and longevity of the strut. Poor quality suspension setups use cheaper oil that can become frothy, lose its strength and degrade overtime. These inferior suspension systems will lose their fluid movement and\/or become too soft. We finish the strut piston with longstanding, high-heat rated double seals that are designed to take abuse without breaking a sweat, literally. No leaking struts here. The strut is the most important part of any suspension system. It determines the ride quality and the overall feel. We do not just use a stiffer spring at the suspension to compensate for a poor quality strut; instead we made sure to start from scratch and build a complete coilover that will differentiate itself from the rest.\u003c\/p\u003e\n\u003cp\u003eNext we pair the struts with a high-tensile strength steel spring that is designed to last without sagging or premature wear. Springs are tested to ensure there is no coil bind and full range of motion. The high quality strut and dampening allows us to use the proper spring rates needed for each setup that will complement the adjustable dampening rates. Each spring is mounted on adjustable aluminum perches that can be used to adjust preload and travel. Incorporated washer and spacers are in place to keep the system free moving especially on McPherson style struts.\u003c\/p\u003e\n\u003cp\u003eThe coilover system is finished with a combination of powder coating, electroplating, and anodizing to give it a great look and protect it. McPherson style struts feature adjustable upper camber plates and pillow ball mounts.\u003c\/p\u003e","brand":"TrackOne Development","offers":[{"title":"Default Title","offer_id":42176014417998,"sku":"T1-11-1770","price":1094.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/9484\/5518\/files\/Track_One_-_T1-11-E36_-_BMW_E36_92-98_-_1_WM__62549.jpg?v=1737562080"},{"product_id":"audi-a4-b8-2wd-08-16","title":"Audi A4 B8 2WD (08-16)","description":"\u003cp\u003e\u003cstrong\u003eT1-11-1800\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAudi B8 2WD Audi A4 Sedan (2008-16)\u003c\/p\u003e\n\u003cp\u003eAudi A4 Avant Station Wagon (2008-16)\u003c\/p\u003e\n\u003cp\u003eAudi A5 Coupe (2007+)\u003c\/p\u003e\n\u003cp\u003eAudi A5Convertible (2009+)\u003c\/p\u003e\n\u003cp\u003eAudi A5 Sportback (2009+)\u003c\/p\u003e\n\u003cp\u003eA7 Sportback (2010+)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpring Rate\u003c\/strong\u003e - Front 12K \/ Rear 8K  \u003c\/p\u003e\n\u003cp\u003eStreet Coilovers are designed to give you the best ride quality without sacrificing any comfort or reliability. Our goal was to design a suspension setup that is reliable for daily driving while providing an enjoyable sporty ride that could be driven on the track.  All setups feature adjustable ride height and 32way or 12way dampening to adapt the ride to your preference. We spent a lot of time sourcing the best components and brought them all together with the help of a reputable engineering company that was up for the task.\u003c\/p\u003e\n\u003cp\u003eStarting with the strut, we invested a lot of time to ensure that they are both durable and reliable. We start with a durable heat-treated steel piston and needle valve to ensure proper travel and linear compression ratio. The strut body is designed to handle the heat and the life cycle it will be put through. Each strut is filled with proprietary oil that is designed to maintain its viscosity even under increased heat or abuse. The oil will keep its unique properties over the years to maintain that same ride quality. This is crucial to the quality and longevity of the strut. Poor quality suspension setups use cheaper oil that can become frothy, lose its strength and degrade overtime. These inferior suspension systems will lose their fluid movement and\/or become too soft. We finish the strut piston with longstanding, high-heat rated double seals that are designed to take abuse without breaking a sweat, literally. No leaking struts here. The strut is the most important part of any suspension system. It determines the ride quality and the overall feel. We do not just use a stiffer spring at the suspension to compensate for a poor quality strut; instead we made sure to start from scratch and build a complete coilover that will differentiate itself from the rest.\u003c\/p\u003e\n\u003cp\u003eNext we pair the struts with a high-tensile strength steel spring that is designed to last without sagging or premature wear. Springs are tested to ensure there is no coil bind and full range of motion. The high quality strut and dampening allows us to use the proper spring rates needed for each setup that will complement the adjustable dampening rates. Each spring is mounted on adjustable aluminum perches that can be used to adjust preload and travel. Incorporated washer and spacers are in place to keep the system free moving especially on McPherson style struts.\u003c\/p\u003e\n\u003cp\u003eThe coilover system is finished with a combination of powder coating, electroplating, and anodizing to give it a great look and protect it. McPherson style struts feature adjustable upper camber plates and pillow ball mounts.\u003c\/p\u003e","brand":"TrackOne Development","offers":[{"title":"Default Title","offer_id":42176014483534,"sku":"T1-11-1800","price":1094.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/9484\/5518\/files\/T1-11-1800-1WM.jpg?v=1737562080"},{"product_id":"toyota-supra-mk4-93-98","title":"Toyota Supra MK4 (93-98)","description":"\u003cp\u003e\u003cstrong\u003eT1-11-1330 \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eToyota Supra (1993-1998)\u003c\/p\u003e\n\u003cp\u003e \u003cstrong\u003eSpring Rate -\u003c\/strong\u003e Front 18K \/ Rear 10K \u003c\/p\u003e\n\u003cp\u003eStreet Coilovers are designed to give you the best ride quality without sacrificing any comfort or reliability. Our goal was to design a suspension setup that is reliable for daily driving while providing an enjoyable sporty ride that could be driven on the track.  All setups feature adjustable ride height and 32way or 12way dampening to adapt the ride to your preference. We spent a lot of time sourcing the best components and brought them all together with the help of a reputable engineering company that was up for the task.\u003c\/p\u003e\n\u003cp\u003eStarting with the strut, we invested a lot of time to ensure that they are both durable and reliable. We start with a durable heat-treated steel piston and needle valve to ensure proper travel and linear compression ratio. The strut body is designed to handle the heat and the life cycle it will be put through. Each strut is filled with proprietary oil that is designed to maintain its viscosity even under increased heat or abuse. The oil will keep its unique properties over the years to maintain that same ride quality. This is crucial to the quality and longevity of the strut. Poor quality suspension setups use cheaper oil that can become frothy, lose its strength and degrade overtime. These inferior suspension systems will lose their fluid movement and\/or become too soft. We finish the strut piston with longstanding, high-heat rated double seals that are designed to take abuse without breaking a sweat, literally. No leaking struts here. The strut is the most important part of any suspension system. It determines the ride quality and the overall feel. We do not just use a stiffer spring at the suspension to compensate for a poor quality strut; instead we made sure to start from scratch and build a complete coilover that will differentiate itself from the rest.\u003c\/p\u003e\n\u003cp\u003eNext we pair the struts with a high-tensile strength steel spring that is designed to last without sagging or premature wear. Springs are tested to ensure there is no coil bind and full range of motion. The high quality strut and dampening allows us to use the proper spring rates needed for each setup that will complement the adjustable dampening rates. Each spring is mounted on adjustable aluminum perches that can be used to adjust preload and travel. Incorporated washer and spacers are in place to keep the system free moving especially on McPherson style struts.\u003c\/p\u003e\n\u003cp\u003eThe coilover system is finished with a combination of powder coating, electroplating, and anodizing to give it a great look and protect it. McPherson style struts feature adjustable upper camber plates and pillow ball mounts.\u003c\/p\u003e","brand":"TrackOne Development","offers":[{"title":"Default Title","offer_id":42176014385230,"sku":"T1-11-1330","price":1094.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/9484\/5518\/files\/T1-11-1330-ToyotaSupraMarkIV_93-98_-1WM.jpg?v=1737562080"},{"product_id":"vw-golf-r-mk7-2015-2021","title":"VW Golf R MK7 (2015-2021)","description":"\u003cp\u003e\u003cstrong\u003eT1-11-1420 \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eVolkswagen Golf R (2015-2021)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpring Rate -\u003c\/strong\u003e Front 8K \/ Rear 8K \u003c\/p\u003e\n\u003cp\u003eStreet Coilovers are designed to give you the best ride quality without sacrificing any comfort or reliability. Our goal was to design a suspension setup that is reliable for daily driving while providing an enjoyable sporty ride that could be driven on the track.  All setups feature adjustable ride height and 32way or 12way dampening to adapt the ride to your preference. We spent a lot of time sourcing the best components and brought them all together with the help of a reputable engineering company that was up for the task.\u003c\/p\u003e\n\u003cp\u003eStarting with the strut, we invested a lot of time to ensure that they are both durable and reliable. We start with a durable heat-treated steel piston and needle valve to ensure proper travel and linear compression ratio. The strut body is designed to handle the heat and the life cycle it will be put through. Each strut is filled with proprietary oil that is designed to maintain its viscosity even under increased heat or abuse. The oil will keep its unique properties over the years to maintain that same ride quality. This is crucial to the quality and longevity of the strut. Poor quality suspension setups use cheaper oil that can become frothy, lose its strength and degrade overtime. These inferior suspension systems will lose their fluid movement and\/or become too soft. We finish the strut piston with longstanding, high-heat rated double seals that are designed to take abuse without breaking a sweat, literally. No leaking struts here. The strut is the most important part of any suspension system. It determines the ride quality and the overall feel. We do not just use a stiffer spring at the suspension to compensate for a poor quality strut; instead we made sure to start from scratch and build a complete coilover that will differentiate itself from the rest.\u003c\/p\u003e\n\u003cp\u003eNext we pair the struts with a high-tensile strength steel spring that is designed to last without sagging or premature wear. Springs are tested to ensure there is no coil bind and full range of motion. The high quality strut and dampening allows us to use the proper spring rates needed for each setup that will complement the adjustable dampening rates. Each spring is mounted on adjustable aluminum perches that can be used to adjust preload and travel. Incorporated washer and spacers are in place to keep the system free moving especially on McPherson style struts.\u003c\/p\u003e\n\u003cp\u003eThe coilover system is finished with a combination of powder coating, electroplating, and anodizing to give it a great look and protect it. McPherson style struts feature adjustable upper camber plates and pillow ball mounts.\u003c\/p\u003e","brand":"TrackOne Development","offers":[{"title":"Default Title","offer_id":42176014712910,"sku":"T1-11-1420","price":1094.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/9484\/5518\/files\/T1-11-1420-VWGolfR_12_-1WM.jpg?v=1737562085"},{"product_id":"vw-golf-mk4-1998-2005","title":"VW Golf MK4 (1998-2005)","description":"\u003cp\u003e\u003cstrong\u003eT1-11-1340 \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eVolkswagen Golf 4 (1998-2005)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpring Rate -\u003c\/strong\u003e Front 7K \/ Rear 5K \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eStreet Coilovers are designed to give you the best ride quality without sacrificing any comfort or reliability. Our goal was to design a suspension setup that is reliable for daily driving while providing an enjoyable sporty ride that could be driven on the track.  All setups feature adjustable ride height and 32way or 12way dampening to adapt the ride to your preference. We spent a lot of time sourcing the best components and brought them all together with the help of a reputable engineering company that was up for the task.\u003c\/p\u003e\n\u003cp\u003eStarting with the strut, we invested a lot of time to ensure that they are both durable and reliable. We start with a durable heat-treated steel piston and needle valve to ensure proper travel and linear compression ratio. The strut body is designed to handle the heat and the life cycle it will be put through. Each strut is filled with proprietary oil that is designed to maintain its viscosity even under increased heat or abuse. The oil will keep its unique properties over the years to maintain that same ride quality. This is crucial to the quality and longevity of the strut. Poor quality suspension setups use cheaper oil that can become frothy, lose its strength and degrade overtime. These inferior suspension systems will lose their fluid movement and\/or become too soft. We finish the strut piston with longstanding, high-heat rated double seals that are designed to take abuse without breaking a sweat, literally. No leaking struts here. The strut is the most important part of any suspension system. It determines the ride quality and the overall feel. We do not just use a stiffer spring at the suspension to compensate for a poor quality strut; instead we made sure to start from scratch and build a complete coilover that will differentiate itself from the rest.\u003c\/p\u003e\n\u003cp\u003eNext we pair the struts with a high-tensile strength steel spring that is designed to last without sagging or premature wear. Springs are tested to ensure there is no coil bind and full range of motion. The high quality strut and dampening allows us to use the proper spring rates needed for each setup that will complement the adjustable dampening rates. Each spring is mounted on adjustable aluminum perches that can be used to adjust preload and travel. Incorporated washer and spacers are in place to keep the system free moving especially on McPherson style struts.\u003c\/p\u003e\n\u003cp\u003eThe coilover system is finished with a combination of powder coating, electroplating, and anodizing to give it a great look and protect it. McPherson style struts feature adjustable upper camber plates and pillow ball mounts.\u003c\/p\u003e","brand":"TrackOne Development","offers":[{"title":"Default Title","offer_id":42176014745678,"sku":"T1-11-1340","price":1094.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/9484\/5518\/files\/T1-11-1340-AudiA3_96-03_-1WM.jpg?v=1737562085"},{"product_id":"subaru-sti-08-14","title":"Subaru STI (08-14)","description":"\u003cp\u003e\u003cstrong\u003eT1-11-1310\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSubaru Impreza STI (2008-2014)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpring Rate -\u003c\/strong\u003e Front 8K \/ Rear 8K   \u003c\/p\u003e\n\u003cp\u003eStreet Coilovers are designed to give you the best ride quality without sacrificing any comfort or reliability. Our goal was to design a suspension setup that is reliable for daily driving while providing an enjoyable sporty ride that could be driven on the track.  All setups feature adjustable ride height and 32way or 12way dampening to adapt the ride to your preference. We spent a lot of time sourcing the best components and brought them all together with the help of a reputable engineering company that was up for the task.\u003c\/p\u003e\n\u003cp\u003eStarting with the strut, we invested a lot of time to ensure that they are both durable and reliable. We start with a durable heat-treated steel piston and needle valve to ensure proper travel and linear compression ratio. The strut body is designed to handle the heat and the life cycle it will be put through. Each strut is filled with proprietary oil that is designed to maintain its viscosity even under increased heat or abuse. The oil will keep its unique properties over the years to maintain that same ride quality. This is crucial to the quality and longevity of the strut. Poor quality suspension setups use cheaper oil that can become frothy, lose its strength and degrade overtime. These inferior suspension systems will lose their fluid movement and\/or become too soft. We finish the strut piston with longstanding, high-heat rated double seals that are designed to take abuse without breaking a sweat, literally. No leaking struts here. The strut is the most important part of any suspension system. It determines the ride quality and the overall feel. We do not just use a stiffer spring at the suspension to compensate for a poor quality strut; instead we made sure to start from scratch and build a complete coilover that will differentiate itself from the rest.\u003c\/p\u003e\n\u003cp\u003eNext we pair the struts with a high-tensile strength steel spring that is designed to last without sagging or premature wear. Springs are tested to ensure there is no coil bind and full range of motion. The high quality strut and dampening allows us to use the proper spring rates needed for each setup that will complement the adjustable dampening rates. Each spring is mounted on adjustable aluminum perches that can be used to adjust preload and travel. Incorporated washer and spacers are in place to keep the system free moving especially on McPherson style struts.\u003c\/p\u003e\n\u003cp\u003eThe coilover system is finished with a combination of powder coating, electroplating, and anodizing to give it a great look and protect it. McPherson style struts feature adjustable upper camber plates and pillow ball mounts.\u003c\/p\u003e","brand":"TrackOne Development","offers":[{"title":"Default Title","offer_id":42176014811214,"sku":"T1-11-1310","price":1094.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/9484\/5518\/files\/T1-11-1310-SubaruImprezaWRXSTi_08-14_-1WM.jpg?v=1737562085"},{"product_id":"subaru-wrx-sti-02-07","title":"Subaru WRX\/STI (02-07)","description":"\u003cp\u003e\u003cstrong\u003eT1-11-1290\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSubaru Impreza WRX \/ WRX STI (2002-2007)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpring Rate -\u003c\/strong\u003e Front 8K \/ Rear 6K \u003c\/p\u003e\n\u003cp\u003eStreet Coilovers are designed to give you the best ride quality without sacrificing any comfort or reliability. Our goal was to design a suspension setup that is reliable for daily driving while providing an enjoyable sporty ride that could be driven on the track.  All setups feature adjustable ride height and 32way or 12way dampening to adapt the ride to your preference. We spent a lot of time sourcing the best components and brought them all together with the help of a reputable engineering company that was up for the task.\u003c\/p\u003e\n\u003cp\u003eStarting with the strut, we invested a lot of time to ensure that they are both durable and reliable. We start with a durable heat-treated steel piston and needle valve to ensure proper travel and linear compression ratio. The strut body is designed to handle the heat and the life cycle it will be put through. Each strut is filled with proprietary oil that is designed to maintain its viscosity even under increased heat or abuse. The oil will keep its unique properties over the years to maintain that same ride quality. This is crucial to the quality and longevity of the strut. Poor quality suspension setups use cheaper oil that can become frothy, lose its strength and degrade overtime. These inferior suspension systems will lose their fluid movement and\/or become too soft. We finish the strut piston with longstanding, high-heat rated double seals that are designed to take abuse without breaking a sweat, literally. No leaking struts here. The strut is the most important part of any suspension system. It determines the ride quality and the overall feel. We do not just use a stiffer spring at the suspension to compensate for a poor quality strut; instead we made sure to start from scratch and build a complete coilover that will differentiate itself from the rest.\u003c\/p\u003e\n\u003cp\u003eNext we pair the struts with a high-tensile strength steel spring that is designed to last without sagging or premature wear. Springs are tested to ensure there is no coil bind and full range of motion. The high quality strut and dampening allows us to use the proper spring rates needed for each setup that will complement the adjustable dampening rates. Each spring is mounted on adjustable aluminum perches that can be used to adjust preload and travel. Incorporated washer and spacers are in place to keep the system free moving especially on McPherson style struts.\u003c\/p\u003e\n\u003cp\u003eThe coilover system is finished with a combination of powder coating, electroplating, and anodizing to give it a great look and protect it. McPherson style struts feature adjustable upper camber plates and pillow ball mounts.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill only fit vehicles with 26mm Clevis\u003c\/strong\u003e\u003c\/p\u003e","brand":"TrackOne Development","offers":[{"title":"Default Title","offer_id":42176014778446,"sku":"T1-11-1290","price":1094.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/9484\/5518\/files\/T1-11-1290-SubaruWRX-STi_2002-2007_-1WM.jpg?v=1737562085"},{"product_id":"subaru-wrx-sti-15-21","title":"Subaru WRX \/ STI (15-21)","description":"\u003cp\u003e\u003cstrong\u003eT1-11-1320\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSubaru Impreza WRX \/ WRX STI 2015 - 2021\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpring Rate -\u003c\/strong\u003e Front 8K \/ Rear 8K \u003c\/p\u003e\n\u003cp\u003eStreet Coilovers are designed to give you the best ride quality without sacrificing any comfort or reliability. Our goal was to design a suspension setup that is reliable for daily driving while providing an enjoyable sporty ride that could be driven on the track.  All setups feature adjustable ride height and 32way or 12way dampening to adapt the ride to your preference. We spent a lot of time sourcing the best components and brought them all together with the help of a reputable engineering company that was up for the task.\u003c\/p\u003e\n\u003cp\u003eStarting with the strut, we invested a lot of time to ensure that they are both durable and reliable. We start with a durable heat-treated steel piston and needle valve to ensure proper travel and linear compression ratio. The strut body is designed to handle the heat and the life cycle it will be put through. Each strut is filled with proprietary oil that is designed to maintain its viscosity even under increased heat or abuse. The oil will keep its unique properties over the years to maintain that same ride quality. This is crucial to the quality and longevity of the strut. Poor quality suspension setups use cheaper oil that can become frothy, lose its strength and degrade overtime. These inferior suspension systems will lose their fluid movement and\/or become too soft. We finish the strut piston with longstanding, high-heat rated double seals that are designed to take abuse without breaking a sweat, literally. No leaking struts here. The strut is the most important part of any suspension system. It determines the ride quality and the overall feel. We do not just use a stiffer spring at the suspension to compensate for a poor quality strut; instead we made sure to start from scratch and build a complete coilover that will differentiate itself from the rest.\u003c\/p\u003e\n\u003cp\u003eNext we pair the struts with a high-tensile strength steel spring that is designed to last without sagging or premature wear. Springs are tested to ensure there is no coil bind and full range of motion. The high quality strut and dampening allows us to use the proper spring rates needed for each setup that will complement the adjustable dampening rates. Each spring is mounted on adjustable aluminum perches that can be used to adjust preload and travel. Incorporated washer and spacers are in place to keep the system free moving especially on McPherson style struts.\u003c\/p\u003e\n\u003cp\u003eThe coilover system is finished with a combination of powder coating, electroplating, and anodizing to give it a great look and protect it. McPherson style struts feature adjustable upper camber plates and pillow ball mounts.\u003c\/p\u003e","brand":"TrackOne Development","offers":[{"title":"Default Title","offer_id":42176014843982,"sku":"T1-11-1320","price":1094.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/9484\/5518\/files\/T1-11-1320-SubaruImprezaWRXSTi_14_-1WM.jpg?v=1737562085"},{"product_id":"audi-a3-13-20-audi-tt-s-15-23","title":"Audi A3 (13-20) \/ Audi TT-S (15-23)","description":"\u003cp\u003e\u003cstrong\u003eT1-11-1870\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAudi A3 AWD (2013-2020) \/ Audi TT-S (2015-2023) - Strut Diameter - 55mm\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpring Rate -\u003c\/strong\u003e Front 8K \/ Rear 8K \u003c\/p\u003e\n\u003cp\u003eStreet Coilovers are designed to give you the best ride quality without sacrificing any comfort or reliability. Our goal was to design a suspension setup that is reliable for daily driving while providing an enjoyable sporty ride that could be driven on the track.  All setups feature adjustable ride height and 32way or 12way dampening to adapt the ride to your preference. We spent a lot of time sourcing the best components and brought them all together with the help of a reputable engineering company that was up for the task.\u003c\/p\u003e\n\u003cp\u003eStarting with the strut, we invested a lot of time to ensure that they are both durable and reliable. We start with a durable heat-treated steel piston and needle valve to ensure proper travel and linear compression ratio. The strut body is designed to handle the heat and the life cycle it will be put through. Each strut is filled with proprietary oil that is designed to maintain its viscosity even under increased heat or abuse. The oil will keep its unique properties over the years to maintain that same ride quality. This is crucial to the quality and longevity of the strut. Poor quality suspension setups use cheaper oil that can become frothy, lose its strength and degrade overtime. These inferior suspension systems will lose their fluid movement and\/or become too soft. We finish the strut piston with longstanding, high-heat rated double seals that are designed to take abuse without breaking a sweat, literally. No leaking struts here. The strut is the most important part of any suspension system. It determines the ride quality and the overall feel. We do not just use a stiffer spring at the suspension to compensate for a poor quality strut; instead we made sure to start from scratch and build a complete coilover that will differentiate itself from the rest.\u003c\/p\u003e\n\u003cp\u003eNext we pair the struts with a high-tensile strength steel spring that is designed to last without sagging or premature wear. Springs are tested to ensure there is no coil bind and full range of motion. The high quality strut and dampening allows us to use the proper spring rates needed for each setup that will complement the adjustable dampening rates. Each spring is mounted on adjustable aluminum perches that can be used to adjust preload and travel. Incorporated washer and spacers are in place to keep the system free moving especially on McPherson style struts.\u003c\/p\u003e\n\u003cp\u003eThe coilover system is finished with a combination of powder coating, electroplating, and anodizing to give it a great look and protect it. McPherson style struts feature adjustable upper camber plates and pillow ball mounts.\u003c\/p\u003e","brand":"TrackOne Development","offers":[{"title":"Default Title","offer_id":42176016744526,"sku":"T1-11-1870","price":1094.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/9484\/5518\/files\/T1-11-1390_-_VW_Golf_7_13_Audi_A3_13_4WD_55mm_-_1_WM__73412.jpg?v=1737562088"},{"product_id":"vw-golf-r-mk5-04-09","title":"VW Golf R MK5 (04-09)","description":"\u003cp\u003e\u003cstrong\u003eT1-11-1370\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eVolkswagen Golf R MK5 AWD (2004-2009)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpring Rate -\u003c\/strong\u003e Front 8K \/ Rear 8K \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eStreet Coilovers are designed to give you the best ride quality without sacrificing any comfort or reliability. Our goal was to design a suspension setup that is reliable for daily driving while providing an enjoyable sporty ride that could be driven on the track.  All setups feature adjustable ride height and 32way or 12way dampening to adapt the ride to your preference. We spent a lot of time sourcing the best components and brought them all together with the help of a reputable engineering company that was up for the task.\u003c\/p\u003e\n\u003cp\u003eStarting with the strut, we invested a lot of time to ensure that they are both durable and reliable. We start with a durable heat-treated steel piston and needle valve to ensure proper travel and linear compression ratio. The strut body is designed to handle the heat and the life cycle it will be put through. Each strut is filled with proprietary oil that is designed to maintain its viscosity even under increased heat or abuse. The oil will keep its unique properties over the years to maintain that same ride quality. This is crucial to the quality and longevity of the strut. Poor quality suspension setups use cheaper oil that can become frothy, lose its strength and degrade overtime. These inferior suspension systems will lose their fluid movement and\/or become too soft. We finish the strut piston with longstanding, high-heat rated double seals that are designed to take abuse without breaking a sweat, literally. No leaking struts here. The strut is the most important part of any suspension system. It determines the ride quality and the overall feel. We do not just use a stiffer spring at the suspension to compensate for a poor quality strut; instead we made sure to start from scratch and build a complete coilover that will differentiate itself from the rest.\u003c\/p\u003e\n\u003cp\u003eNext we pair the struts with a high-tensile strength steel spring that is designed to last without sagging or premature wear. Springs are tested to ensure there is no coil bind and full range of motion. The high quality strut and dampening allows us to use the proper spring rates needed for each setup that will complement the adjustable dampening rates. Each spring is mounted on adjustable aluminum perches that can be used to adjust preload and travel. Incorporated washer and spacers are in place to keep the system free moving especially on McPherson style struts.\u003c\/p\u003e\n\u003cp\u003eThe coilover system is finished with a combination of powder coating, electroplating, and anodizing to give it a great look and protect it. McPherson style struts feature adjustable upper camber plates and pillow ball mounts.\u003c\/p\u003e","brand":"TrackOne Development","offers":[{"title":"Default Title","offer_id":42176016777294,"sku":"T1-11-1370","price":1094.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/9484\/5518\/files\/T1-11-1370_-_VW_Golf_5_04-09_6_10-14_4WD_55mm_Diameter_-_1_WM__80167.jpg?v=1737562088"},{"product_id":"toyota-supra-mk5-19","title":"Toyota Supra MK5 (19+)","description":"\u003cp\u003e\u003cstrong\u003eT1-11-1700\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eToyota Supra 2019+\u003c\/p\u003e\n\u003cp\u003eBMW Z4 2019+\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpring Rate -\u003c\/strong\u003e Front 8K \/ Rear 12K \u003c\/p\u003e\n\u003cp\u003eStreet Coilovers are designed to give you the best ride quality without sacrificing any comfort or reliability. Our goal was to design a suspension setup that is reliable for daily driving while providing an enjoyable sporty ride that could be driven on the track.  All setups feature adjustable ride height and 32way or 12way dampening to adapt the ride to your preference. We spent a lot of time sourcing the best components and brought them all together with the help of a reputable engineering company that was up for the task.\u003c\/p\u003e\n\u003cp\u003eStarting with the strut, we invested a lot of time to ensure that they are both durable and reliable. We start with a durable heat-treated steel piston and needle valve to ensure proper travel and linear compression ratio. The strut body is designed to handle the heat and the life cycle it will be put through. Each strut is filled with proprietary oil that is designed to maintain its viscosity even under increased heat or abuse. The oil will keep its unique properties over the years to maintain that same ride quality. This is crucial to the quality and longevity of the strut. Poor quality suspension setups use cheaper oil that can become frothy, lose its strength and degrade overtime. These inferior suspension systems will lose their fluid movement and\/or become too soft. We finish the strut piston with longstanding, high-heat rated double seals that are designed to take abuse without breaking a sweat, literally. No leaking struts here. The strut is the most important part of any suspension system. It determines the ride quality and the overall feel. We do not just use a stiffer spring at the suspension to compensate for a poor quality strut; instead we made sure to start from scratch and build a complete coilover that will differentiate itself from the rest.\u003c\/p\u003e\n\u003cp\u003eNext we pair the struts with a high-tensile strength steel spring that is designed to last without sagging or premature wear. Springs are tested to ensure there is no coil bind and full range of motion. The high quality strut and dampening allows us to use the proper spring rates needed for each setup that will complement the adjustable dampening rates. Each spring is mounted on adjustable aluminum perches that can be used to adjust preload and travel. Incorporated washer and spacers are in place to keep the system free moving especially on McPherson style struts.\u003c\/p\u003e\n\u003cp\u003eThe coilover system is finished with a combination of powder coating, electroplating, and anodizing to give it a great look and protect it. McPherson style struts feature adjustable upper camber plates and pillow ball mounts.\u003c\/p\u003e","brand":"TrackOne Development","offers":[{"title":"Default Title","offer_id":42176016842830,"sku":"T1-11-1700","price":1094.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/9484\/5518\/files\/Track_One_-_Supra_Mark_V_-_T1-11-1700_-_1_WM__68571.jpg?v=1737562088"},{"product_id":"vw-golf-mk7-15-21-50mm-strut-diameter","title":"VW Golf MK7 (15-21) - 50mm Strut Diameter","description":"\u003cp\u003e\u003cstrong\u003eT1-11-1860\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eVolkswagen Golf MK7 (2015-2021) - Strut Diameter - 50mm\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpring Rate -\u003c\/strong\u003e Front 7K \/ Rear 5K \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eStreet Coilovers are designed to give you the best ride quality without sacrificing any comfort or reliability. Our goal was to design a suspension setup that is reliable for daily driving while providing an enjoyable sporty ride that could be driven on the track.  All setups feature adjustable ride height and 32way or 12way dampening to adapt the ride to your preference. We spent a lot of time sourcing the best components and brought them all together with the help of a reputable engineering company that was up for the task.\u003c\/p\u003e\n\u003cp\u003eStarting with the strut, we invested a lot of time to ensure that they are both durable and reliable. We start with a durable heat-treated steel piston and needle valve to ensure proper travel and linear compression ratio. The strut body is designed to handle the heat and the life cycle it will be put through. Each strut is filled with proprietary oil that is designed to maintain its viscosity even under increased heat or abuse. The oil will keep its unique properties over the years to maintain that same ride quality. This is crucial to the quality and longevity of the strut. Poor quality suspension setups use cheaper oil that can become frothy, lose its strength and degrade overtime. These inferior suspension systems will lose their fluid movement and\/or become too soft. We finish the strut piston with longstanding, high-heat rated double seals that are designed to take abuse without breaking a sweat, literally. No leaking struts here. The strut is the most important part of any suspension system. It determines the ride quality and the overall feel. We do not just use a stiffer spring at the suspension to compensate for a poor quality strut; instead we made sure to start from scratch and build a complete coilover that will differentiate itself from the rest.\u003c\/p\u003e\n\u003cp\u003eNext we pair the struts with a high-tensile strength steel spring that is designed to last without sagging or premature wear. Springs are tested to ensure there is no coil bind and full range of motion. The high quality strut and dampening allows us to use the proper spring rates needed for each setup that will complement the adjustable dampening rates. Each spring is mounted on adjustable aluminum perches that can be used to adjust preload and travel. Incorporated washer and spacers are in place to keep the system free moving especially on McPherson style struts.\u003c\/p\u003e\n\u003cp\u003eThe coilover system is finished with a combination of powder coating, electroplating, and anodizing to give it a great look and protect it. McPherson style struts feature adjustable upper camber plates and pillow ball mounts.\u003c\/p\u003e","brand":"TrackOne Development","offers":[{"title":"Default Title","offer_id":42176016711758,"sku":"T1-11-1860","price":1094.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/9484\/5518\/files\/T1-11-1380_-_VW_Golf_713_Audi_A3_13_2WD_50mm_Diameter_-_1_WM__99064.jpg?v=1737562088"},{"product_id":"vw-golf-mk7-2015-2021","title":"VW Golf MK7 (2015-2021)","description":"\u003cp\u003e\u003cstrong\u003eT1-11-1850\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eVolkswagen Golf 7 2WD (2015-2021) \u003cspan data-mce-fragment=\"1\"\u003e- Strut Diameter - 55mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eAudi A3 2WD (2012+) 2WD - Strut Diameter - 55mm\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpring Rate -\u003c\/strong\u003e Front 8K \/ Rear 5K \u003c\/p\u003e\n\u003cp\u003eStreet Coilovers are designed to give you the best ride quality without sacrificing any comfort or reliability. Our goal was to design a suspension setup that is reliable for daily driving while providing an enjoyable sporty ride that could be driven on the track.  All setups feature adjustable ride height and 32way or 12way dampening to adapt the ride to your preference. We spent a lot of time sourcing the best components and brought them all together with the help of a reputable engineering company that was up for the task.\u003c\/p\u003e\n\u003cp\u003eStarting with the strut, we invested a lot of time to ensure that they are both durable and reliable. We start with a durable heat-treated steel piston and needle valve to ensure proper travel and linear compression ratio. The strut body is designed to handle the heat and the life cycle it will be put through. Each strut is filled with proprietary oil that is designed to maintain its viscosity even under increased heat or abuse. The oil will keep its unique properties over the years to maintain that same ride quality. This is crucial to the quality and longevity of the strut. Poor quality suspension setups use cheaper oil that can become frothy, lose its strength and degrade overtime. These inferior suspension systems will lose their fluid movement and\/or become too soft. We finish the strut piston with longstanding, high-heat rated double seals that are designed to take abuse without breaking a sweat, literally. No leaking struts here. The strut is the most important part of any suspension system. It determines the ride quality and the overall feel. We do not just use a stiffer spring at the suspension to compensate for a poor quality strut; instead we made sure to start from scratch and build a complete coilover that will differentiate itself from the rest.\u003c\/p\u003e\n\u003cp\u003eNext we pair the struts with a high-tensile strength steel spring that is designed to last without sagging or premature wear. Springs are tested to ensure there is no coil bind and full range of motion. The high quality strut and dampening allows us to use the proper spring rates needed for each setup that will complement the adjustable dampening rates. Each spring is mounted on adjustable aluminum perches that can be used to adjust preload and travel. Incorporated washer and spacers are in place to keep the system free moving especially on McPherson style struts.\u003c\/p\u003e\n\u003cp\u003eThe coilover system is finished with a combination of powder coating, electroplating, and anodizing to give it a great look and protect it. McPherson style struts feature adjustable upper camber plates and pillow ball mounts.\u003c\/p\u003e","brand":"TrackOne Development","offers":[{"title":"Default Title","offer_id":42176016810062,"sku":"T1-11-1850","price":1094.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/9484\/5518\/files\/Track_One_-_T1-11-Golf7_-_VW_Golf_12_2WD_55mm_Diameter_-_1_WM__41230.jpg?v=1737562089"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/9484\/5518\/collections\/71tTKlva4qL.jpg?v=1772751438","url":"https:\/\/performancepart.ca\/collections\/trackone.oembed?page=2","provider":"Performance Part Canada","version":"1.0","type":"link"}