{"title":"G87 M2 2023-Present","description":"","products":[{"product_id":"awe-exhaust-suite-for-g87-bmw-m2","title":"AWE EXHAUST SUITE FOR G87 BMW M2","description":"\u003cp\u003e\u003cstrong\u003eCompact powerhouse. Presenting the AWE Exhaust Suite for the BMW G87 M2:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e50-state emissions-complaint dual 3” exhaust configuration\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAvailable as valved SwitchPath™ or rowdy Track Edition\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eOptional non-resonated performance mid-pipes available separately\u003c\/li\u003e\n\u003cli\u003eSwitchPath™ incorporates AWE’s drone-canceling 180 Technology®, and retains all factory valve controls – no additional remote needed\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTrack Edition (with mid-pipes) provides a 13 lb weight savings over the stock exhaust\u003c\/li\u003e\n\u003cli\u003eBespoke X-pipe unlocks a smooth tone out of the S58\u003c\/li\u003e\n\u003cli\u003eBall socket mounting points for easy installation\u003c\/li\u003e\n\u003cli\u003eMax gains of 3 hp and 4 lb-ft of torque at the wheels\u003c\/li\u003e\n\u003cli\u003eQuad 4.5” double-walled, slash-cut tips available in chrome silver and diamond black\u003c\/li\u003e\n\u003cli\u003eLess is more: clean, straight-through design maximizes performance\u003c\/li\u003e\n\u003cli\u003eManufactured in-house in the USA, at AWE\u003c\/li\u003e\n\u003cli\u003eAWE No CEL Guarantee\u003c\/li\u003e\n\u003cli\u003eAWE Perfect Fitment Guarantee\u003c\/li\u003e\n\u003cli\u003eAWE Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan\u003eSWITCHPATH™ \u003cstrong\u003eVALVED EXHAUST:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eFeaturing AWE's patented drone-canceling 180 Technology®, the AWE SwitchPath™ brings no drone, minimal bends, maximum flow, and push-button attitude. The SwitchPath™ Exhaust is composed of 3-inch U.S.-sourced T304L stainless steel, a precision x-pipe, and a valved SwitchPath™ muffler tuned specifically for the S58. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBeginning after the factory mid-pipe, the precision X-pipe immediately helps smooth the S58 of its rasp, deepening the tone before it's refined further by the bespoke SwitchPath™ muffler in the rear. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe closed valve experience\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWhen the valves are closed, the SwitchPath™ Exhaust produces a refined, aggressive howl while remaining full-bodied and powerful – no congested, metallic sounds when on the throttle. At cruising speeds, interior acoustics are close to stock with no drone at cruising speeds. AWE SwitchPath™ tech also responds perfectly to the many transmission settings and shift points in the G87. Drop the hammer with the valves closed and SwitchPath™ sings a proper M anthem. If you were to leave the valves closed at all times after equipping SwitchPath™, we wouldn’t blame you — it’s that good… all of the time. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe opened valve experience\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOpen the valves and the S58’s roar is uncorked. Sport and Sport+ modes achieve the ultimate contrast in behavior when compared to comfort driving modes (valves closed). In Sport mode, the exhaust note is powerful, clean, and aggressive. In Sport+ mode, the same aggression applies… but with grin-provoking burbles.  Thanks to the precision X-pipe, the rasp is still kept in check while allowing the exhaust note to reach full aggression.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIf you’re looking for the best of both worlds (i.e. drone-free, clean aggression), and want to retain your factory valve behavior all while gaining peace of mind (i.e. emissions compliance), look no further than SwitchPath™. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eTHE TRACK EDITION:\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eAWE’s Track Edition takes all of the precision engineering and performance of its SwitchPath™ counterpart, minus the valved muffler in the rear. The result is a constant “valve open” mode, at an affordable price. If you’re craving rich and rowdy tones at all times, and a hefty 13 lb weight savings, this is your dose of steel. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Track Edition Exhaust, also 50 state legal like its SwitchPath™ sibling, comes complete with AWE valve simulators to accommodate your factory exhaust valve motors. Happy ECU, happy life.  \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eNote: This version is known to get rowdy, and may be too much for many. For that reason, this particular version cannot be returned due to sound preference. Prepare yourself (Sport+ mode can be pretty raucous)!\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eTHE NON-RESONATED PERFORMANCE MID PIPES:\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eDitch the factory mid-section and replace it with two 3”, non-resonated mid-pipes designed to up the ante in the aggression department. Mate the mid-pipes to the SwitchPath™ or Track Edition Exhausts if you prefer the party to start right behind the factory secondary catalysts. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eVERY IMPORTANT FITMENT NOTES (PLEASE READ THIS TOO):\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eMid Pipes:\u003c\/span\u003e\u003cspan\u003e AWE’s Non-Resonated Performance Mid-Pipes are designed to be paired to AWE Exhausts only. Due to varying cut points, they’re not guaranteed to work with another manufacturer’s exhaust configuration.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eExhausts:\u003c\/span\u003e\u003cspan\u003e AWE Exhausts feature inlet adapters to mate to the factory mid-section. When pairing AWE Mid-Pipes to the SwitchPath™ or Track Edition Exhausts, the aforementioned adapters are not needed. Due to varying cut points, AWE Exhausts are not guaranteed to mate with another manufacturer’s mid pipes. \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eValances: \u003c\/span\u003e\u003cspan\u003eAWE Exhausts are confirmed to fit all \u003c\/span\u003e\u003cspan\u003efactory\u003c\/span\u003e\u003cspan\u003e valances.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"text-align-center\"\u003eDyno Tests: AWE Exhaust Suite for the BMW G87 M2\u003c\/h3\u003e\n\u003cp class=\"text-align-center\"\u003eBelow are comparison dyno tests as performed on our Mustang MD-500-SE AWD dyno.\u003c\/p\u003e\n\u003cp class=\"text-align-center\"\u003e\u003cb\u003eWheel horsepower gains for the AWE SwitchPath™ Exhaust and Non-Res Performance Mid-Pipes for the G87 M2\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"text-align-center\"\u003e\u003cb\u003e\u003cimg alt=\"G82 Dyno\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0240\/7294\/5728\/files\/AWE_G87M2_WheelDyno.jpg?v=1716992646\"\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"text-align-center\"\u003e\u003cb\u003e\u003cspan\u003eThe AWE No CEL (Check Engine Light) Guarantee is noted on certain AWE products, and offers peace of mind against the appearance of Check Engine Lights when products are installed properly and used as intended, on vehicles with no additional modifications, with the exception of other AWE products intended to work with the product in question.\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003ch2 data-sider-select-id=\"7745098c-e798-4b27-afae-a86c1fe3f391\"\u003eWHAT IS 180 TECHNOLOGY®?\u003c\/h2\u003e\n\u003cp\u003e\u003cimg alt=\"\" data-entity-type=\"\" data-entity-uuid=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0240\/7294\/5728\/files\/180-technology-gray_480x480.png?v=1668533361\"\u003e\u003c\/p\u003e\n\u003cp\u003eAWE's patented 180 Technology® works a little something like this: As exhaust gases exit the engine and flow into an AWE 180 Technology®-equipped resonator, they pass through strategically located ports, and into reflection chambers.\u003c\/p\u003e\n\u003cp\u003eSound waves, carried by these exhaust gasses, bounce off the walls of the reflection chambers.  Depending on the sound requirements of each vehicle, AWE acoustic engineers adjust the size and location of the ports and the chambers.  By controlling the size and location of these key elements, we also control when the sound waves exit the chambers.  The specific timing of when the reflected sound waves re-join the main exhaust flow creates a one-hundred-and-eighty-degree out-of-phase sound wave that cancels out problematic frequencies.\u003c\/p\u003e\n\u003ch2\u003eCONSISTENCY THROUGH CHANGE.\u003c\/h2\u003e\n\u003cp\u003eAWE 180 Technology® is not on a “one size fits all” concept. Rather, AWE engineers design sound cancelation resonators based upon the specific acoustics generated by vehicle types, thereby ensuring perfect sound, every time. It’s one of the reasons AWE exhausts have earned a reputation for the perfect tone, regardless of application.\u003c\/p\u003e\n\u003ch2\u003eWHAT IT MEANS TO YOU.\u003c\/h2\u003e\n\u003cp\u003eThe result? The removal of unwanted tones in all AWE 180 Technology®-equipped exhaust systems. The sound produced by this formula is the perfect, signature note. Unlocked performance and spot-on tone, every time.\u003c\/p\u003e\n\u003ch2\u003eA VIDEO’S WORTH 1,000,000 WORDS.\u003c\/h2\u003e\n\u003cp\u003e180 Technology® in action, below.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe height=\"380\" src=\"https:\/\/www.youtube.com\/embed\/HAidjOSe4rI\" width=\"675\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003c!----\u003e","brand":"AWE","offers":[{"title":"AWE Non-Resonated Performance Mid Pipe for BMW G8X M2\/M3\/M4","offer_id":42158681882702,"sku":"3820-11489","price":295.0,"currency_code":"USD","in_stock":true},{"title":"AWE Track Edition Exhaust for BMW G87 M2 - Chrome Silver Tips","offer_id":42158681915470,"sku":"3020-42487","price":1995.0,"currency_code":"USD","in_stock":true},{"title":"AWE Track Edition Exhaust for BMW G87 M2 - Diamond Black Tips","offer_id":42158681948238,"sku":"3020-43487","price":1995.0,"currency_code":"USD","in_stock":true},{"title":"AWE SwitchPath™ Exhaust for BMW G87 M2 - Chrome Silver Tips","offer_id":42158681981006,"sku":"3025-42487","price":2995.0,"currency_code":"USD","in_stock":true},{"title":"AWE SwitchPath™ Exhaust for BMW G87 M2 - Diamond Black Tips","offer_id":42158682013774,"sku":"3025-43487","price":2995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/9484\/5518\/files\/3025-43487_1.webp?v=1736798072"},{"product_id":"bmw-g87-m2-carbon-fiber-rear-diffuser","title":"BMW G87 M2 CARBON FIBER REAR DIFFUSER","description":"\u003cp\u003e\u003cspan\u003eA14A90-1301\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv id=\"one\" class=\"Description\"\u003e\n\u003cdiv class=\"tab-discription\"\u003e\n\u003cdiv class=\"ProductMeta__Description\"\u003e\n\u003cdiv class=\"Rte\"\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe BMW G87 M2 Rear Diffuser has been expertly crafted by hand using prepreg carbon fiber materials. It has been CFD tested and precisely designed to ensure a perfect fitment with your BMW M2. This Diffuser offers the highest quality providing precise fitment and reliability.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"specifications-header\"\u003e\n\u003ch4\u003eREAR DIFFUSER Specifications\u003c\/h4\u003e\n\u003ch5\u003eBMW G87 M2\u003c\/h5\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"TableWrapper\"\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eSKU:\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eFront: A14A90-1201 \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eCompatible with:\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003e2023+ BMW G87 M2\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eMaterial:\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003ePrepreg Carbon Fiber\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eDimensions:\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eTBA\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eWeight:\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eTBA\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eWhat’s in the box:\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003e1 Rear Diffuser\u003c\/span\u003e\u003cbr\u003e3M tape\u003cbr\u003eBolts\/Screws\u003cbr\u003e1 Installation manual\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!----\u003e","brand":"ADRO","offers":[{"title":"Default Title","offer_id":42182219038798,"sku":"A14A90-1301","price":2139.47,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/9484\/5518\/files\/001_1200x1200_96116fd4-effd-4bbb-af77-bef0cfd6a7d5.webp?v=1737748857"},{"product_id":"bmw-g87-m2-at-r3-swan-neck-wing","title":"BMW G87 M2 AT-R3 SWAN NECK WING","description":"\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eA14A90-1501\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOur Formula 1 heritage is evident in our AT-R3 swan neck wing. Its compositional design is 45% lighter than aluminum, while the upright engineering maximizes aerodynamic efficiency and minimizes air resistance. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eADRO's BMW M2 AT-R3 Dual Element Wing is crafted from prepreg carbon fiber and offers over 277.7 pounds of downforce at 110 mph, making sure weight savings are at their peak.\u003c\/p\u003e\n\u003cdiv class=\"specifications-header\"\u003e\n\u003ch4\u003eAT-R3 WING SPECIFICATIONS\u003c\/h4\u003e\n\u003ch5\u003eBMW G87 M2\u003c\/h5\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"TableWrapper\"\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eSKU:\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eFront: A14A90-1501 \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eCompatible with:\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003e2023+ BMW G87 M2\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003e2021+ BMW G42\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eMaterial:\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003ePrepreg Carbon Fiber\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eDimensions:\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eTBA\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eWeight:\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eTBA\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eWhat’s in the box:\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003e1 Main Plate\u003c\/span\u003e\u003cbr\u003e1 Dual Element Main Plate\u003cbr\u003e2 Curved End Plates\u003cbr\u003e2 Aluminum Brackets\u003cbr\u003e2 Carbon Fiber reinforcement trunk brackets\u003cbr\u003eHardware\u003cbr\u003e1 Installation manual\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation Guide:\u003c\/td\u003e\n\u003ctd\u003eTBA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"ADRO","offers":[{"title":"Default Title","offer_id":42182219989070,"sku":"A14A90-1501","price":3674.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/9484\/5518\/files\/001_1200x1200_bc8b32ea-5373-4b07-9663-4b0c0424e4f3.jpg?v=1737748870"},{"product_id":"akrapovic-g87-m2-g42-2-series-wing-mounting-bracket-set","title":"Akrapovic G87 M2 \/ G42 2-Series Wing Mounting Bracket Set","description":"\u003ch4 class=\"product-sku\"\u003e\u003cspan class=\"variant-sku\"\u003eAKRP-HF1523\u003c\/span\u003e\u003c\/h4\u003e\n\u003cdiv class=\"product-single__description rte\" itemprop=\"description\"\u003e\n\u003cdiv class=\"product-single__description rte\" itemprop=\"description\"\u003e\n\u003cdiv class=\"product-single__description rte\" itemprop=\"description\"\u003e\n\u003cp\u003e\u003cspan\u003eMandatory fitting kit, used for mounting the Rear Wing (Carbon) to BMW M2 (G87) and M240I (G42).\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-inquiry product-content-tab\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-inquiry product-content-tab\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Akrapovic","offers":[{"title":"Default Title","offer_id":42182956646478,"sku":"AKRP-HF1523","price":155.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/9484\/5518\/files\/8b3f1b57-4c53-4ac4-858b-eff19e195b6e_1024x1024_2c55f64d-3d2f-4d20-a95a-a4e7bb7ed585.webp?v=1737758328"},{"product_id":"akrapovic-2021-bmw-g87-m2-g80-m3-amp-g82-m4-octagonal-carbon-design-tail-pipe-set","title":"Akrapovic 2021+ BMW G87 M2, G80 M3 \u0026amp; G82 M4 Octagonal Carbon Design Tail Pipe Set","description":"\u003ch3 class=\"mt-3\" data-mce-fragment=\"1\" _ngcontent-c13=\"\"\u003eTP-CT\/69\u003c\/h3\u003e\n\u003cp\u003eAkrapovic 2021+ BMW M3 (G80)\/M4 (G82) Tail Pipe Set (Black Carbon)\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eA \u003c\/span\u003e\u003cstrong\u003eground-breaking octagonal shape\u003c\/strong\u003e\u003cspan\u003e has been fashioned from l\u003c\/span\u003e\u003cstrong\u003eightweight titanium\u003c\/strong\u003e\u003cspan\u003e with a \u003c\/span\u003e\u003cstrong\u003ecarbon-fibre outer sleeve\u003c\/strong\u003e\u003cspan\u003e, totally in keeping with lines of the car. For more traditional buyers, there is the classic cylindrical design, also constructed from same materials, but featuring an update to the current range of tailpipes for BMW cars available from Akrapovič.\u003c\/span\u003e\u003c\/p\u003e","brand":"Akrapovic","offers":[{"title":"Default Title","offer_id":42182968868942,"sku":"TP-CT\/69","price":2103.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/9484\/5518\/files\/f2d6458b-3e60-438a-b1ba-3ad2433e8eeb_f38b125d-b0d3-4b75-ba12-f639e76d9101.png?v=1737758438"},{"product_id":"akrapovic-2021-bmw-g87-m2-g80-m3-amp-g82-m4-sound-kit","title":"Akrapovic 2021+ BMW G87 M2, G80 M3 \u0026amp; G82 M4 Sound Kit","description":"\u003ch3 class=\"mt-3\" data-mce-fragment=\"1\" _ngcontent-c13=\"\"\u003e\u003cspan style=\"font-size: 1.4em;\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eP-HF1384\u003c\/span\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003eThe optional Akrapovič Sound Kit enables owners of selected Akrapovič car exhausts to control the sound of the system from the cockpit of their machine. Using Akrapovič technology, drivers can easily switch between the quiet mode and a sportier sound. With the use of a receiver to drive the actuators that open or close the valves at the end of the exhaust system, drivers can use the Sound Remote Controller or the new smartphone app (for iOS and Android) to regulate the valves.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003eWith the use of the optional Akrapovič Sound Kit, the ECE type approval is no longer valid.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003ePictures are symbolic.\u003c\/p\u003e","brand":"Akrapovic","offers":[{"title":"Default Title","offer_id":42182969262158,"sku":"P-HF1384","price":560.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/9484\/5518\/files\/fa5e81e9-7ad3-4af7-b8d7-9788925df866.png?v=1737758442"},{"product_id":"akrapovic-bmw-m2-coupe-g87-chopped-carbon-fiber-mirror-cap-set-matte","title":"Akrapovic BMW M2 Coupe (G87) Chopped Carbon Fiber Mirror Cap Set - Matte","description":"\u003cp\u003e\u003cspan\u003eWM-BM\/CA\/5\/CF\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eTo further personalise the BMW M2 Coupé, M3 or M4. These stunning mirror caps have been designed especially for the car, and they match the lines beautifully. Constructed from high-grade, \u003cstrong\u003elightweight chopped \u003c\/strong\u003e\u003cstrong\u003ecarbon fibre\u003c\/strong\u003e, they are hand-crafted by highly skilled specialists and make a unique addition to the car, while also complementing the \u003cstrong\u003etailpipes \u003c\/strong\u003eof the Slip-On Line (Titanium) exhaust, the \u003cstrong\u003erear wing\u003c\/strong\u003e, and the other Akrapovič products in the carbon-fibre accessory range. They are available in high-gloss or matte finish.\u003c\/span\u003e\u003c\/p\u003e","brand":"Akrapovic","offers":[{"title":"Default Title","offer_id":42182969753678,"sku":"WM-BM\/CA\/5\/CF","price":1500.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/9484\/5518\/files\/4a1f53fe-97a7-49a3-b86d-21ff85b2cd85_grande_97b5ca69-b303-4856-a85b-be840810a1ad.webp?v=1737758445"},{"product_id":"akrapovic-bmw-m2-coupe-g87-rear-chopped-carbon-fiber-diffuser-matte","title":"Akrapovic BMW M2 Coupe (G87) Rear Chopped Carbon Fiber Diffuser - Matte","description":"\u003ch1 itemprop=\"name\"\u003e\u003cspan class=\"variant-sku\"\u003eDI-BM\/CA\/10\/CF\u003c\/span\u003e\u003c\/h1\u003e\n\u003cdiv id=\"collapse-tab1\" class=\"description_product\"\u003e\n\u003cp\u003e\u003cspan\u003eTo further personalize the styling, there is a choice of optional hand-crafted \u003c\/span\u003e\u003cstrong\u003echopped carbon-fibre\u003c\/strong\u003e\u003cspan\u003e rear diffusers. Produced in-house by highly skilled technicians, this \u003c\/span\u003e\u003cstrong\u003elightweight\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003eaccessory – with \u003c\/span\u003e\u003cstrong\u003eABE type approval\u003c\/strong\u003e\u003cspan\u003e – is designed to show off the tailpipes of the Akrapovič Slip-On Line (Titanium) exhaust at their absolute best.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"fitment-description-tab\"\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv class=\"fitment-note-metafields\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003eThis part fits the following vehicles\u003c\/p\u003e\n\u003cdiv\u003e\n\u003ctable class=\"fitment-description-table\"\u003e\n\u003ctbody\u003e\n\u003ctr class=\"table-header\"\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eSubmodel\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"table-row\"\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003e2 Series G87 M2 (2023+)\u003c\/td\u003e\n\u003ctd\u003eM2\u003c\/td\u003e\n\u003ctd\u003eS58 3.0L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Akrapovic","offers":[{"title":"Default Title","offer_id":42182969851982,"sku":"DI-BM\/CA\/10\/CF","price":1818.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/9484\/5518\/files\/163c27a3-1bde-48a3-8196-d8946c19d0d5_grande_1bd58fe8-450c-44d8-9002-1bea7b758fae.webp?v=1737758445"},{"product_id":"akrapovic-2023-bmw-m2-g87-mirror-cap-set-gloss","title":"Akrapovic 2023 BMW M2 (G87) Mirror Cap Set- Gloss","description":"\u003cp class=\"font-light text-[12px] tracking-[0.02em] leading-[20px] lg:text-[18px] lg:tracking-[0.02em] lg:leading-[24px] ng-tns-c54-2 ng-trigger ng-trigger-fadeInUp\" data-mce-fragment=\"1\"\u003e\u003cspan\u003eWM-BM\/CA\/4\/G\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTo set off the car to its visual best, these side mirror caps are available from Akrapovič for the first time on any vehicle. Made from beautifully hand-crafted\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ecarbon fibre\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ein a matt or high-gloss finish, these\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eexquisite\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eproducts are designed to emphasise the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003esporty line\u003c\/strong\u003e\u003cstrong\u003es\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eof the M2 and complement the other external options, including the rear diffuser and tailpipes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003eMirror cap set does not fit on right-hand drive vehicle.\u003c\/p\u003e","brand":"Akrapovic","offers":[{"title":"Default Title","offer_id":42182975225934,"sku":"WM-BM\/CA\/4\/G","price":1476.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/9484\/5518\/files\/image_6_3b5fafb0-471a-4bd2-86e4-d6d2996f1e35.png?v=1737758503"},{"product_id":"akrapovic-2023-bmw-m2-g87-fitting-kit-for-rear-wing-wi-bm-ca-1-g","title":"Akrapovic 2023 BMW M2 (G87) Fitting Kit for Rear Wing WI-BM\/CA\/1\/G","description":"\u003cp class=\"font-light text-[12px] tracking-[0.02em] leading-[20px] lg:text-[18px] lg:tracking-[0.02em] lg:leading-[24px] ng-tns-c54-2 ng-trigger ng-trigger-fadeInUp\" data-mce-fragment=\"1\"\u003eP-HF1523\u003c\/p\u003e\n\u003cp\u003eFitment notice:\u003c\/p\u003e\n\u003cp\u003eMandatory fitting kit, used for mounting the Rear Wing (Carbon) to BMW M2 (G87)\u003c\/p\u003e","brand":"Akrapovic","offers":[{"title":"Default Title","offer_id":42182975782990,"sku":"P-HF1523","price":155.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/9484\/5518\/files\/2023-08-2914_24_17-Akrapovic_WorldChampionship-WinningExhaustSystemTechnology_grande_640ea914-118f-4064-9ff2-4d230beb4306.jpg?v=1737758507"},{"product_id":"akrapovic-2023-bmw-m2-g87-rear-carbon-fiber-diffuser-gloss","title":"Akrapovic 2023 BMW M2 (G87) Rear Carbon Fiber Diffuser - Gloss","description":"\u003cp class=\"font-light text-[12px] tracking-[0.02em] leading-[20px] lg:text-[18px] lg:tracking-[0.02em] lg:leading-[24px] ng-tns-c54-2 ng-trigger ng-trigger-fadeInUp ng-animating\" data-mce-fragment=\"1\"\u003e\u003cspan\u003eDI-BM\/CA\/10\/G\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFor extra visual impact, there is the option to add a hand-crafted \u003c\/span\u003e\u003cstrong\u003ecarbon fibre\u003c\/strong\u003e\u003cspan\u003e diffuser. Produced in-house, this \u003c\/span\u003e\u003cstrong\u003elightweight\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003eaccessory – with \u003c\/span\u003e\u003cstrong\u003eABE type approval\u003c\/strong\u003e\u003cspan\u003e – is designed to show off the tailpipes of the Akrapovič exhaust at their absolute best.\u003c\/span\u003e\u003c\/p\u003e","brand":"Akrapovic","offers":[{"title":"Default Title","offer_id":42182975815758,"sku":"DI-BM\/CA\/10\/G","price":1923.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/9484\/5518\/files\/image_5.png?v=1737758507"},{"product_id":"akrapovic-2023-bmw-m2-g87-mirror-cap-set-matte","title":"Akrapovic 2023 BMW M2 (G87) Mirror Cap Set- Matte","description":"\u003cp class=\"font-light text-[12px] tracking-[0.02em] leading-[20px] lg:text-[18px] lg:tracking-[0.02em] lg:leading-[24px] ng-tns-c54-2 ng-trigger ng-trigger-fadeInUp\" data-mce-fragment=\"1\"\u003e\u003cspan\u003eWM-BM\/CA\/4\/M\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTo set off the car to its visual best, these side mirror caps are available from Akrapovič for the first time on any vehicle. Made from beautifully hand-crafted\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ecarbon fibr\u003c\/strong\u003ee in a matt or high-gloss finish, these\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eexquisite\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eproducts are designed to emphasise the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003esporty lines\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eof the M2 and complement the other external options, including the rear diffuser and tailpipes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMirror cap set does not fit on right-hand drive vehicle.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Akrapovic","offers":[{"title":"Default Title","offer_id":42182975750222,"sku":"WM-BM\/CA\/4\/M","price":1334.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/9484\/5518\/files\/image_6.png?v=1737758507"},{"product_id":"akrapovic-2023-bmw-m2-g87-rear-carbon-fiber-diffuser-matte","title":"Akrapovic 2023 BMW M2 (G87) Rear Carbon Fiber Diffuser - Matte","description":"\u003cp class=\"font-light text-[12px] tracking-[0.02em] leading-[20px] lg:text-[18px] lg:tracking-[0.02em] lg:leading-[24px] ng-tns-c54-2 ng-trigger ng-trigger-fadeInUp ng-animating\" data-mce-fragment=\"1\"\u003e\u003cspan\u003eDI-BM\/CA\/10\/M\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFor extra visual impact, there is the option to add a hand-crafted \u003c\/span\u003e\u003cstrong\u003ecarbon fibre\u003c\/strong\u003e\u003cspan\u003e diffuser. Produced in-house, this \u003c\/span\u003e\u003cstrong\u003elightweight\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003eaccessory – with \u003c\/span\u003e\u003cstrong\u003eABE type approval\u003c\/strong\u003e\u003cspan\u003e – is designed to show off the tailpipes of the Akrapovič exhaust at their absolute best.\u003c\/span\u003e\u003c\/p\u003e","brand":"Akrapovic","offers":[{"title":"Default Title","offer_id":42182975848526,"sku":"DI-BM\/CA\/10\/M","price":1731.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/9484\/5518\/files\/image_5_657e3c0a-980c-49de-80fe-7b0475a4c895.png?v=1737758507"},{"product_id":"akrapovic-2021-bmw-g87-m2-g80-m3-amp-g82-m4-rear-carbon-wing-requires-additional-fitting-kit","title":"Akrapovic 2021+ BMW G87 M2, G80 M3 \u0026amp; G82 M4 Rear Carbon Wing (requires additional fitting kit)","description":"\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eWI-BM\/CA\/1\/G\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eManufactured from lightweight hand-crafted\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ecarbon fibre\u003c\/strong\u003e, this product is lacquered to create a high-gloss finish. It is mounted on two brackets with a swan neck design, fabricated from lightweight CNC-machined\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ealuminium\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eto provide the best ratio between weight and performance. The brackets have been optimized to provide the optimum ratio between load-bearing capacity and weight. The bolts used to connect the wing and the brackets are high-grade\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003etitanium\u003c\/strong\u003e. High-grade titanium reinforcements have been incorporated for better structural stability at pivot points. Designed with echoes from the motorsport world, the derived aerofoil of the wing was developed to achieve an extremely competitive ratio between downforce and drag. A small lip is placed at the trailing edge of a wing to achieve maximum performance of the wing by creating even more downforce.\u003c\/p\u003e\n\u003cp\u003eOptimized for the aerodynamics of the BMW M2, computational fluid dynamics (CFD) has been used to ensure the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ebest functionality\u003c\/strong\u003e, and great attention has been paid to guaranteeing that the overall geometry does not cause additional air turbulence around the rear or generate additional noise on the side of the car.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFully adjustable\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eto three levels, the wing needs to be manually set to the preferred angle before driving. It is\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eABE approved\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ewith AKR-WI KBA 31882 type approval and finished with an understated Akrapovič monochrome logo on each side.\u003c\/p\u003e","brand":"Akrapovic","offers":[{"title":"Default Title","offer_id":42182975881294,"sku":"WI-BM\/CA\/1\/G","price":4424.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/9484\/5518\/files\/f2273f6f-a46f-4a44-92da-33889b9e7b5c.png?v=1737758509"},{"product_id":"akrapovic-2023-bmw-m2-g87-slip-on-line-titanium-req-tips","title":"Akrapovic 2023 BMW M2 (G87) Slip-On Line (Titanium) (Req. Tips)","description":"\u003cp class=\"font-light text-[12px] tracking-[0.02em] leading-[20px] lg:text-[18px] lg:tracking-[0.02em] lg:leading-[24px] ng-tns-c54-2 ng-trigger ng-trigger-fadeInUp ng-animating\" data-mce-fragment=\"1\"\u003eS-BM\/T\/34H\u003c\/p\u003e\n\u003cp\u003eThis \u003cstrong\u003ehigh-grade lightweight titanium system\u003c\/strong\u003e, finished with \u003cstrong\u003ehand-crafted carbon-fibre tailpipes\u003c\/strong\u003e, weighs in at\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e32,7 \u003c\/strong\u003e\u003cstrong\u003e% lighter\u003c\/strong\u003e than stock and features a pair of \u003cstrong\u003ecollectors cast in the in-house foundry\u003c\/strong\u003e. The Slip-On Line (Titanium) comes with a specially developed \u003cstrong\u003eAkrapovič control kit\u003c\/strong\u003e for a complete sound experience. The sound character offers a rich tone at normal cruising, rising to a deep sporty sound when the M2 is driven more dynamically. It serves up a \u003cstrong\u003eperfect sound at all rpms\u003c\/strong\u003e, delivering comfort and sportiness in one exhaust. A ground-breaking octagonal shape has been fashioned from lightweight titanium with a carbon-fibre outer sleeve for the tailpipes, and for more traditional buyers there is the classic cylindrical design.\u003c\/p\u003e\n\u003cp\u003eThe system delivers \u003cstrong\u003epower increases\u003c\/strong\u003e of 3.9 kW (5.3 hp) at 2,800 rpm and a \u003cstrong\u003etorque gain\u003c\/strong\u003e of 13.5 Nm at 2,800 rpm when tested on the Akrapovič dyno against a BMW M2 with a standard stock exhaust. Remapping is not needed for this configuration, and it fits all vehicles (OPF and non-OPF), but the ECE certificate is valid only for cars equipped with an OPF filter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOptional link pipes and downpipes are available\u003c\/strong\u003e for customers looking to change the exhaust for closed circuit usage. An optional \u003cstrong\u003eAkrapovič Sound Kit\u003c\/strong\u003e is also available. With the installation of the optional link pipes, downpipes, and Akrapovič Sound Kit, ECE type approval of the Slip-On Line (Titanium) is no longer valid. An optional hand-crafted carbon-fibre rear diffuser is also available to add an extra visual impact to the Akrapovič tailpipes.\u003c\/p\u003e\n\u003cp\u003eThe Slip-On Line (Titanium) exhaust system is ECE type approved for cars equipped with an Otto\/gasoline particulate filter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Tail Pipe Set (Carbon) has to be ordered separately as a mandatory part. Please choose TP-CT\/69 or TP-CT\/68.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Akrapovic","offers":[{"title":"Default Title","offer_id":42182976274510,"sku":"S-BM\/T\/34H","price":5274.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/9484\/5518\/files\/c76e4ae7-ee35-4d15-875d-8e3e6a9e2117.png?v=1737758512"},{"product_id":"akrapovic-2021-bmw-g87-m2-g80-m3-amp-g82-m4-classic-carbon-design-tail-pipe-set","title":"Akrapovic 2021+ BMW G87 M2, G80 M3 \u0026amp; G82 M4 Classic Carbon Design Tail Pipe Set","description":"\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eTP-CT\/68\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"xl:w-[456px] ng-tns-c56-39\"\u003e\n\u003cdiv class=\"product-description xl:mt-[32px] font-light text-[14px] ng-tns-c56-39\"\u003e\n\u003cp\u003eA ground-breaking octagonal shape has been fashioned from lightweight titanium with a carbon-fibre outer sleeve, totally in keeping with lines of the car. For more traditional buyers, there is the classic cylindrical design, also constructed from same materials, but featuring an update to the current range of tailpipes for BMW cars available from Akrapovič.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Akrapovic","offers":[{"title":"Default Title","offer_id":42182977159246,"sku":"TP-CT\/68","price":1949.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/9484\/5518\/files\/368b8c8a-8a2d-48a3-ab63-d6b9e98310f6.png?v=1737758525"},{"product_id":"plm-downpipes-with-epa-cats-bmw-s58-g80-g82-m3-m4-g8x-g87-m2","title":"PLM Downpipes with EPA Cats - BMW S58 G80 G82 M3 M4 G8X G87 M2","description":"\u003cdiv\u003eThe PLM High-Flow Downpipes for BMW G80 M3, G82 M4, and G87 M2 are meticulously designed in-house using advanced Faro CMM 3D scanning and CAD\/CAE software to ensure precision and performance. Crafted to the highest standards, these downpipes deliver exceptional value and are available with EPA-compliant metallic core 400-cell catalytic converters, offering quieter yet sporty sound, zero exhaust fume, and alignment with EPA standards. Perfect for enthusiasts seeking both performance and compliance, these downpipes are a must-have upgrade. Explore our range of parts for your M2\/M3\/M4 and check out our YouTube channel for sound clips and dyno results!\u003c\/div\u003e","brand":"PrivateLabelMfg","offers":[{"title":"EPA Compliant 400 CPSI","offer_id":42220701777998,"sku":"PLM-DP-G80-CAT","price":1495.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/9484\/5518\/files\/P1139086-PhotoRoom.png-PhotoRoom.png?v=1738969403"},{"product_id":"plm-billet-front-strut-brace-bmw-g80-g82-g87-m2-m3-m4-csl","title":"PLM Billet Front Strut Brace - BMW G80 G82 G87 M2 M3 M4 CSL","description":"\u003cdiv\u003ePLM Billet Front Strut Brace - BMW G80 G82 M3 M4 G8X\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eUnlike the factory brace that is a stamped steel welded piece, PLM brace is machined out of solid piece of billet aluminum blocks, with nice chamfered edges for improved strength and aesthetics.\u003c\/div\u003e\n\u003cbr\u003e\n\u003cdiv\u003eThis M4 CLS inspired brace is made strong using 6061-T6 billet aluminum and designed in-house here at PLM using the latest CAD\/CAE software, USA made billet aerospace grade 6061 aluminum, and USA-made HAAS CNC machines to the highest standard.\u003c\/div\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003e\u003cbr\u003e\u003c\/span\u003eFeatures:\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eMachined finish in 6061 grade billet aluminum\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEngineered \u0026amp; made in the USA\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eComplete set of multi-piece brace\u003c\/li\u003e\n\u003cli\u003eInstalls in minutes, retains factory hardware\u003c\/li\u003e\n\u003cli\u003ePrecision CNC machined in-house\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on installation\u003c\/li\u003e\n\u003cli\u003eIncludes stainless steel hardware\u003c\/li\u003e\n\u003cli\u003eMachined silver raw finish\u003c\/li\u003e\n\u003cli\u003ePLM one year warranty\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLimited production run.  Be one of the few to get these unique strut brace!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eVehicle fitment:\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eBMW M3 G80 2021+\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBMW M4 G82  2021+\u003c\/li\u003e\n\u003cli\u003eBMW M2 G87\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"PrivateLabelMfg","offers":[{"title":"Default Title","offer_id":42221010976846,"sku":"PLM-STB-BILLET-G8X","price":1495.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/9484\/5518\/files\/P1151301.jpg?v=1738971717"},{"product_id":"verus-engineering-g87-m2-carbon-front-splitter-kit","title":"Verus Engineering G87 M2 Carbon Polyweave Front Splitter Kit","description":"\u003cp\u003eFront splitters are very effective at producing front-end downforce without increasing drag significantly. They do this by creating a large pressure delta between the top and bottom surfaces. Utilizing scan data directly from the car and CFD, we were able to produce a splitter that pairs well with our UCW rear wing and can easily handle the loads seen by the splitter. Splitter tunnels or splitter diffusers were added to increase front end downforce further than a flat blade alone. The splitter mounts to multiple chassis locations for a strong and durable mounting style. All hardware locations are recessed for improved aerodynamic performance.\u003c\/p\u003e\n\u003cp\u003eDuring research and development, great care and focus was taken to ensure the oil cooler's exit airflow did not adversely hurt splitter performance. We offer a block off plate, an exit duct, and you can run the car with a wide open splitter as well, for varying levels of front on downforce and performance.\u003c\/p\u003e\n\u003cp\u003eThe splitter is produced from a carbon polyweave, which is the same material used in high forms of Motorsports. The material is not brittle, so no more issues with cracking like carbon fiber and ABS. It will not grab and bend under the car like aluminum units either.  The material is also lightweight and stiff; which makes it a great splitter material.\u003c\/p\u003e\n\u003cp\u003eThe air dam is used to bring the splitter flat with the vehicle's underbody and improve performance further.  The air dam is produced from sheet aluminum and then powder coated black for durability.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.verus-engineering.com\/web\/content\/235846?unique=b0a18b8f2d0c157410c1e76aac0b0523313603ef\u0026amp;download=true\" target=\"_blank\" rel=\"noopener\"\u003eClick Here\u003c\/a\u003e for installation instructions. An \u003ca href=\"https:\/\/www.verus-engineering.com\/web\/content\/234535?unique=dfe0ddd05168ec6e65716d8120defa5f982e96ea\u0026amp;download=true\u0026amp;access_token=0cae9c31-a222-4ffe-8b0c-999dfe485599\" target=\"_blank\" rel=\"noopener\"\u003eInformation Packet\u003c\/a\u003e is also available.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKit Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTwo-Piece Carbon Polyweave Splitter Blade\u003c\/li\u003e\n\u003cli\u003eThree-Piece Aluminum Front Air Dam\u003c\/li\u003e\n\u003cli\u003e(6) Sheet Steel Chassis Bracket\u003c\/li\u003e\n\u003cli\u003e(2) Steel Chassis Bracket\u003c\/li\u003e\n\u003cli\u003e(2) Splitter Diffuser Tunnel\u003c\/li\u003e\n\u003cli\u003e(1) Oil Cooler Exit Duct\u003c\/li\u003e\n\u003cli\u003e(1) Oil Cooler Block Off Plate\u003c\/li\u003e\n\u003cli\u003eRubber Edge Seal for Air Dam\u003c\/li\u003e\n\u003cli\u003eHardware Kit Including All Necessary Bolts\/Nuts\/Washers for a seamless install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eGreatly Increases Front End Downforce\u003c\/li\u003e\n  \u003cli\u003eProduces High Downforce for Large Rear Wings\u003c\/li\u003e\n  \u003cli\u003eCapable of Handling 300+ Lbs\u003c\/li\u003e\n  \u003cli\u003eConstructed From Carbon Polyweave, Which Offers Strength, Low Weight, Durability, and a Great Appearance\u003c\/li\u003e\n  \u003cli\u003eSame Material Used in Various Forms of Racing, Including Indy Car, NASCAR, and F1\u003c\/li\u003e\n  \u003cli\u003eSplitter Diffusers designed for improved performance\u003c\/li\u003e\n  \u003cli\u003eIntegrated Air Dam that Follows The Front Bumper Lines Well\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFront Splitter is Manufactured From Carbon Polyweave, Offering Superior Strength, Weight, Durability, and Appearance to Many Other Options\u003c\/li\u003e\n  \u003cli\u003eWill Not Grab and Bend Surfaces Like Aluminum Units\u003c\/li\u003e\n  \u003cli\u003eWill Not Crack and Break Like Carbon and ABS Units\u003c\/li\u003e\n  \u003cli\u003eAbrasive Resistant While Stiff\u003c\/li\u003e\n  \u003cli\u003e5052 Aluminum Air Dam\u003c\/li\u003e\n  \u003cli\u003eCarbon Diffuser Tunnels\u003c\/li\u003e\n  \u003cli\u003eCNC Cut and Bent Brackets\u003c\/li\u003e\n  \u003cli\u003eStainless Hardware Throughout\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":43494256246862,"sku":"A0536A","price":2599.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/9484\/5518\/files\/54309472204_aa2825448f_b.jpg?v=1772557945"},{"product_id":"verus-engineering-g87-m2-carbon-dual-dive-plane-canard-kit","title":"Verus Engineering G87 M2 Carbon Dual Dive Plane Canard Kit","description":"\u003cp\u003eThe Verus Engineering Dive Plane (Canard) Kit adds front-end downforce without the necessity of moving the front splitter further forward. Dive planes, when designed properly, improve downforce on the units themselves as well as improving wheel well evacuation which is what we focus on in our development. By manipulating the flow around the vehicle, we are able to improve vehicle performance.\u003c\/p\u003e\n\u003cp\u003eUtilizing state-of-the-art analysis software during the R\u0026amp;D process, we were able to extract more performance for the given build volume; increasing downforce generated from the dive planes.\u003c\/p\u003e\n\u003cp\u003eThis dive plane kit was designed for owners looking to shift aero balance forward to help aid in balancing out a large rear wing or diffuser.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.verus-engineering.com\/web\/content\/210658?unique=45c1f93b21af148918b4f3145c43c760a0658329\u0026amp;download=true\u0026amp;access_token=ea2b6cc8-9cec-4fc5-993e-5778e1e702c4\" target=\"_blank\" rel=\"noopener\"\u003eClick Here\u003c\/a\u003e for installation instructions. An \u003ca href=\"https:\/\/www.verus-engineering.com\/web\/content\/210691?unique=dfe0ddd05168ec6e65716d8120defa5f982e96ea\u0026amp;download=true\u0026amp;access_token=013571e2-cb08-4fad-8c3d-fef64d9b80f9\" target=\"_blank\" rel=\"noopener\"\u003eInformation Packet\u003c\/a\u003e is also available.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePre-Preg, 2x2 Twill, Autoclave Cured, Carbon Fiber Composition\u003c\/li\u003e\n\u003cli\u003eCFD Optimized Design\u003c\/li\u003e\n\u003cli\u003e3M VHB Double-Sided Tape (Cut to Dive Plane Shape) or Bolt-On Install\u003c\/li\u003e\n\u003cli\u003eTemplates for Install Included\u003c\/li\u003e\n\u003cli\u003eHardware Kit, Includes All Necessary Hardware for Install\u003c\/li\u003e\n\u003cli\u003eReduce Lift (Increase Downforce)\u003c\/li\u003e\n\u003cli\u003eShift Aero Balance Forward\u003c\/li\u003e\n\u003cli\u003eAllows for Fine Tuning of Aero Balancing (Forward Biased)\u003c\/li\u003e\n\u003cli\u003eHelp Seal Sides of Car\u003c\/li\u003e\n\u003cli\u003eEvacuate Air From the Front of the Wheel Well\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":43494256312398,"sku":"A0539A","price":529.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/9484\/5518\/files\/54473601098_8ede4bb693_b.jpg?v=1772557945"},{"product_id":"20-bmw-g80-m3-m4","title":"21-24 BMW M2 \/ M3 \/ M4 (G87 \/ G80 \/ G82)","description":"\u003cdiv class=\"series-copy br-series\"\u003e\n\u003ch1\u003eBR Series\u003c\/h1\u003e\n\u003cdiv class=\"image-gallery-br\"\u003e\n\u003cdiv\u003e\u003ca href=\"\/\/cdn.shopify.com\/s\/files\/1\/0036\/6863\/9856\/products\/bc-racing-default-br-series.jpg?v=1571253987\" class=\"big image-link\"\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0036\/6863\/9856\/products\/bc-racing-default-br-series_medium.jpg?v=1571253987\" alt=\"\"\u003e \u003c\/a\u003e\u003c\/div\u003e\n\u003cp class=\"gallery-disclaimer\"\u003e\"Product images shown are for reference only and may not accurately represent the actual product received\"\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003eThe BC Racing BR Series offers the most affordable entry into coilover suspension without sacrificing performance, comfort, build quality, vehicle height, or handling. This is done by extensively testing each vehicle then refining the coilover characteristics as many times as needed to ensure the most well-balanced and affordable aftermarket suspension conceivable. BC Racing takes great pride in choosing spring rates for our off-the-shelf kits that strike the perfect balance between comfort and performance so you're never stuck with an oversprung suspension like many other brands sell. BC Racing offers one of the widest ranges of damping adjustment with 30-clicks of compression\/rebound adjusted simultaneously on the BR Series. With meticulously chosen spring rates, damper valving, and one of the widest adjustment ranges in the industry, you can't go wrong with the BC Racing BR Series Coilover System.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHighly Customizable\u003c\/li\u003e\n\u003cli\u003eMono-Tube Shock Design\u003c\/li\u003e\n\u003cli\u003eLinear Piston And Damping Curve\u003c\/li\u003e\n\u003cli\u003eHeight Adjustment Independent Of Spring Compression\u003c\/li\u003e\n\u003cli\u003e30-Clicks Of Simultaneous Compression\/Rebound Adjustment\u003c\/li\u003e\n\u003cli\u003eFront Camber Plates Standard On Applicable Kits\u003c\/li\u003e\n\u003cli\u003eRear Camber Plates Available For Applicable Kits\u003c\/li\u003e\n\u003cli\u003eCustom Spring Rates And Swift Springs Available\u003c\/li\u003e\n\u003cli\u003eCustom Valving Or Valving Paired For Custom Spring Rates\u003c\/li\u003e\n\u003cli\u003e2-Year Warranty Against Manufacturers Defect\u003c\/li\u003e\n\u003cli\u003eFully Rebuildable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"series-copy ds-series\"\u003e\n\u003ch1\u003eDS Series\u003c\/h1\u003e\n\u003cdiv class=\"image-gallery-ds\"\u003e\n\u003cdiv\u003e\u003ca href=\"\/\/cdn.shopify.com\/s\/files\/1\/0036\/6863\/9856\/products\/bc-racing-default-ds-series.jpg?v=1571253989\" class=\"big image-link\"\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0036\/6863\/9856\/products\/bc-racing-default-ds-series_medium.jpg?v=1571253989\" alt=\"\"\u003e \u003c\/a\u003e\u003c\/div\u003e\n\u003cp class=\"gallery-disclaimer\"\u003e\"Product images shown are for reference only and may not accurately represent the actual product received\"\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003eBC Racing's new proprietary digressive piston design offers increased damping force at low piston velocities while maintaining a linear damper feel at higher piston velocities. One of the greatest advantages of increased low-speed damping force relates to what the driver feels, e.g., roll, pitch, dive, and quick weight transitions on technical road courses. For The Ultimate In Driver Feel - Choose BC Racing DS Series Coilovers.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHighly Customizable\u003c\/li\u003e\n\u003cli\u003eMono-Tube Shock Design\u003c\/li\u003e\n\u003cli\u003eDigressive Piston And Damping Curve\u003c\/li\u003e\n\u003cli\u003eSatin Chrome Finished Shock Body\u003c\/li\u003e\n\u003cli\u003eHeight Adjustment Independent Of Spring Compression\u003c\/li\u003e\n\u003cli\u003e30-Clicks Of Simultaneous Compression\/Rebound Adjustment\u003c\/li\u003e\n\u003cli\u003eFront Camber Plates Standard On Applicable Kits\u003c\/li\u003e\n\u003cli\u003eRear Camber Plates Available For Applicable Kits\u003c\/li\u003e\n\u003cli\u003eCustom Spring Rates And Swift Spring Compatible\u003c\/li\u003e\n\u003cli\u003eCustom Valving Or Valving - Paired For Custom Spring Rates\u003c\/li\u003e\n\u003cli\u003e2-Year Warranty Against Manufacturers Defect\u003c\/li\u003e\n\u003cli\u003eFully Rebuildable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"series-copy er-series\"\u003e\n\u003ch1\u003eER Series\u003c\/h1\u003e\n\u003cdiv class=\"image-gallery-er\"\u003e\n\u003cdiv\u003e\u003ca href=\"\/\/cdn.shopify.com\/s\/files\/1\/0036\/6863\/9856\/products\/bc-racing-default-er-series.jpg?v=1571253991\" class=\"big image-link\"\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0036\/6863\/9856\/products\/bc-racing-default-er-series_medium.jpg?v=1571253991\" alt=\"\"\u003e \u003c\/a\u003e\u003c\/div\u003e\n\u003cp class=\"gallery-disclaimer\"\u003e\"Product images shown are for reference only and may not accurately represent the actual product received\"\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003eThe BC Racing ER Series Coilover System is the next evolution in your suspension tuning and vehicle setup needs. The ER Series offers 30-clicks of independently adjustable compression and rebound with remote reservoirs to increase oil capacity and help with faster heat dissipation. Each ER Series Coilover System undergoes the same rigorous testing and development as the coilover series that precede it, with the addition of more extensive real-world track testing. For racers and enthusiasts that are looking for more adjustability in terms of varying compression and rebound settings, look no further than the BC Racing ER Series Coilover System.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHighly Customizable\u003c\/li\u003e\n\u003cli\u003eMono-Tube Damper\u003c\/li\u003e\n\u003cli\u003eLinear Twin-Piston Design\u003c\/li\u003e\n\u003cli\u003eHeight Adjustment Independent Of Spring Compression\u003c\/li\u003e\n\u003cli\u003e30-Clicks Of Compression Adjustment Via The External Reservoirs\u003c\/li\u003e\n\u003cli\u003e30-Clicks Of Rebound Adjustment From The Top Of The Damper\u003c\/li\u003e\n\u003cli\u003eFront And Rear Camber Plates Standard On All Applicable Kits\u003c\/li\u003e\n\u003cli\u003eFront And Rear Pillowball Mounts Standard When Camber Plates Do Not Apply\u003c\/li\u003e\n\u003cli\u003eCustom Spring Rates And Swift Spring Compatible\u003c\/li\u003e\n\u003cli\u003eCustom Valved To Match The Drivers Requested Spring Rates\u003c\/li\u003e\n\u003cli\u003eSwift Spring Upgrade Available On Most Applications\u003c\/li\u003e\n\u003cli\u003e2-Year Warranty Against Manufacturers Defect\u003c\/li\u003e\n\u003cli\u003eFully Rebuildable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"series-copy hm-series\"\u003e\n\u003ch1\u003eHM Series\u003c\/h1\u003e\n\u003cdiv class=\"image-gallery-hm\"\u003e\n\u003cdiv\u003e\u003ca href=\"\/\/cdn.shopify.com\/s\/files\/1\/0036\/6863\/9856\/products\/bc-racing-default-hm-series.jpg?v=1571253994\" class=\"big image-link\"\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0036\/6863\/9856\/products\/bc-racing-default-hm-series_medium.jpg?v=1571253994\" alt=\"\"\u003e \u003c\/a\u003e\u003c\/div\u003e\n\u003cp class=\"gallery-disclaimer\"\u003e\"Product images shown are for reference only and may not accurately represent the actual product received\"\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003eThe BC Racing HM Series Coilover System gets its great qualities from a combination of two previous BC Racing Coilover Systems - the RM Series and ER Series. The HM Series uses an inverted mono-tube damper, just like the RM Series, but adds the independent compression and rebound adjustment of the ER Series. Each HM Series Coilover System uses inverted mono-tube dampers front and rear on McPherson strut vehicles with steel braided lines leading from the top of the damper to the external reservoirs. The external reservoirs allow for a higher oil capacity with the added benefit of increased thermal dissipation, they also house the secondary damping piston. For Subarus and other McPherson suspension vehicles that are heavily tracked, the BC Racing HM Series Suspension System is definitely worth checking out!\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHighly Customizable\u003c\/li\u003e\n\u003cli\u003eSwift Springs Come Standard On HM Series Coilovers\u003c\/li\u003e\n\u003cli\u003eInverted Mono-Tube Damper\u003c\/li\u003e\n\u003cli\u003eLinear Twin-Piston Design\u003c\/li\u003e\n\u003cli\u003eHeight Adjustment Independent Of Spring Compression\u003c\/li\u003e\n\u003cli\u003e30-Clicks Of Compression Adjustment Via The External Reservoirs\u003c\/li\u003e\n\u003cli\u003e30-Clicks Of Rebound Adjustment From The Bottom Of The Damper\u003c\/li\u003e\n\u003cli\u003eFront And Rear Camber Plates Standard On All Applicable Kits\u003c\/li\u003e\n\u003cli\u003eFront And Rear Pillowball Mounts Standard When Camber Plates Do Not Apply\u003c\/li\u003e\n\u003cli\u003eCustom Valved To Match The Drivers Requested Spring Rates\u003c\/li\u003e\n\u003cli\u003e2-Year Warranty Against Manufacturers Defect\u003c\/li\u003e\n\u003cli\u003eFully Rebuildable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"series-copy rm-series\"\u003e\n\u003ch1\u003eRM Series\u003c\/h1\u003e\n\u003cdiv class=\"image-gallery-rm\"\u003e\n\u003cdiv\u003e\u003ca href=\"\/\/cdn.shopify.com\/s\/files\/1\/0036\/6863\/9856\/products\/bc-racing-default-rm-series.jpg?v=1571253996\" class=\"big image-link\"\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0036\/6863\/9856\/products\/bc-racing-default-rm-series_medium.jpg?v=1571253996\" alt=\"\"\u003e \u003c\/a\u003e\u003c\/div\u003e\n\u003cp class=\"gallery-disclaimer\"\u003e\"Product images shown are for reference only and may not accurately represent the actual product received\"\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003eThe BC Racing RM Series Coilover System uses a mono-tube inverted damper in the front and rear of vehicles that use McPherson style OEM strut suspension. On vehicles that use front struts only, BC Racing provides an inverted front strut and then provides an upright BR Series damper for the rear. Inverted dampers are useful in decreasing unsprung weight by moving the greatest mass of the strut to the top where it connects to the sprung weight of the chassis, where weight can be more easily shaved. The BC Racing RM Series Coilover System uses a much larger inverted piston shaft that can handle higher lateral loads for longer periods of time without fatigue. These higher lateral loads are only prevalent on McPherson style strut suspension, not on Double A-Arm vehicles.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHighly Customizable\u003c\/li\u003e\n\u003cli\u003eInverted Mono-Tube Strut Design\u003c\/li\u003e\n\u003cli\u003eLinear Piston And Damping Curve\u003c\/li\u003e\n\u003cli\u003eHeight Adjustment Independent Of Spring Compression\u003c\/li\u003e\n\u003cli\u003e30-Clicks Of Simultaneous Compression\/Rebound Adjustment\u003c\/li\u003e\n\u003cli\u003eFront Camber Plates Standard On Applicable Kits\u003c\/li\u003e\n\u003cli\u003eRear Camber Plates Available For Applicable Kits\u003c\/li\u003e\n\u003cli\u003eCustom Spring Rates And Swift Spring Compatible\u003c\/li\u003e\n\u003cli\u003eCustom Valving Or Valving Paired For Custom Spring Rates\u003c\/li\u003e\n\u003cli\u003e1-Year Warranty Against Manufacturers Defect\u003c\/li\u003e\n\u003cli\u003eFully Rebuildable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"series-copy zr-series\"\u003e\n\u003ch1\u003eZR Series\u003c\/h1\u003e\n\u003cdiv class=\"image-gallery-zr\"\u003e\n\u003cdiv\u003e\u003ca href=\"\/\/cdn.shopify.com\/s\/files\/1\/0036\/6863\/9856\/products\/bc-racing-default-zr-series.jpg?v=1571253999\" class=\"big image-link\"\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0036\/6863\/9856\/products\/bc-racing-default-zr-series_medium.jpg?v=1571253999\" alt=\"\"\u003e \u003c\/a\u003e\u003c\/div\u003e\n\u003cp class=\"gallery-disclaimer\"\u003e\"Product images shown are for reference only and may not accurately represent the actual product received\"\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003eThe BC Racing ZR Series Coilovers offer the most adjustability of any BC Racing Coilover System to date. Each ZR Series Coilover System is track tested and developed specifically for racers looking for more damping adjustability than the ER or HM Series can provide. The ZR Series offers 15-clicks of low-speed compression adjustment, 12-clicks of high-speed compression adjustment, and 30-clicks of rebound adjustment. They also offer full height adjustability independent of piston shaft travel and spring compression. On cars with McPherson struts, the ZR Series comes standard with an inverted mono-tube damper. The damper has a steel braided line exiting the top of the damper leading to the external reservoirs that can be remotely mounted on the chassis for easy adjustment. Cars with Double A-Arm suspension come with upright dampers. These dampers have steel braided lines or solid stems that exit the damper at the bottom and lead to the external reservoir that can be mounted under the chassis or on the shock body itself.\u003c\/p\u003e\n\u003cp\u003e*Not all vehicles allow for inverted front and rear dampers. In such cases an upright mono-tube damper will be supplied. The braided line\/hard stem for the external reservoir exits the base of the damper when not inverted. Please note that not all vehicles use camber plates in the front and\/or rear. In such cases pillowball top mounts are supplied in place of camber plates on HM \u0026amp; ZR Series Coilover Systems.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInverted Mono-Tube Damper\u003c\/li\u003e\n\u003cli\u003eLinear Twin Piston Design\u003c\/li\u003e\n\u003cli\u003eSwift Springs Come Standard On ZR Series Coilover\u003c\/li\u003e\n\u003cli\u003eHeight Adjustment Independent Of Spring Compression\u003c\/li\u003e\n\u003cli\u003e30-Clicks Of Rebound Adjustment\u003c\/li\u003e\n\u003cli\u003e15-Clicks Of Low Speed Compression Adjustment\u003c\/li\u003e\n\u003cli\u003e12-Clicks Of High Speed Compression Adjustment\u003c\/li\u003e\n\u003cli\u003eFront And Rear Camber Plates Standard On All Applicable Kits\u003c\/li\u003e\n\u003cli\u003eFront And Rear Pillowball Mounts Standard When Camber Plates Do Not Apply\u003c\/li\u003e\n\u003cli\u003eCustom Spring Rates Available\u003c\/li\u003e\n\u003cli\u003eCustom Valving Or Valving Paired For Custom Spring Rates\u003c\/li\u003e\n\u003cli\u003e2-Year Warranty Against Manufacturers Defect\u003c\/li\u003e\n\u003cli\u003eFully Rebuildable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003eZX Series\u003c\/h1\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0036\/6863\/9856\/files\/09-ZX-png_fff09b55-28c6-4949-9b56-8b9bfd06a505.png?v=1767715496\" alt=\"\" width=\"253\" height=\"253\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe BC Racing ZX Series Coilovers are the highest level of adjustability within the BC Racing coilover system to date, next to the ZR series. Designed specifically for racing and track use, the ZX Series features 3-way adjustable damping force. The ZX Series provides 20 clicks of low-speed compression, 12 clicks of high-speed compression, and 30 clicks of rebound adjustment. The ZX Series adopts an upright cylinder design, rather than inverted cylinders used on the ZR series. This allows for the possibility of replacing the upper mount, while combining the excellent characteristics of the DS and ER series. Coupled with ultra-high viscosity index racing shock fluid, the ZX Series can maintain outstanding performance on the track and in drifting competitions for extended periods. \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDigressive Piston and Damping Curve\u003c\/li\u003e\n\u003cli\u003eUltra-high Viscosity Index Full Synthetic Shock Fluid\u003c\/li\u003e\n\u003cli\u003eUpright Mono-Tube Damper\u003c\/li\u003e\n\u003cli\u003e3-Way Adjustable Damping Control\u003c\/li\u003e\n\u003cli\u003e30 Clicks of Rebound Adjustment\u003c\/li\u003e\n\u003cli\u003e20 Clicks of Low Speed Compression Adjustment\u003c\/li\u003e\n\u003cli\u003e12 Clicks of High Speed Compression Adjustment\u003c\/li\u003e\n\u003cli\u003eDual Piston Design\u003c\/li\u003e\n\u003cli\u003eTrack-Oriented Setup\u003c\/li\u003e\n\u003cli\u003eCustom Spring Rates Available\u003c\/li\u003e\n\u003cli\u003e2-Year Warranty Against Manufacturers Defect\u003cmeta charset=\"utf-8\"\u003e\n\u003c\/li\u003e\n\u003cli\u003eFully Rebuildable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"BC Racing","offers":[{"title":"BR-SERIES","offer_id":43497024356430,"sku":"I-103-BR","price":1233.42,"currency_code":"USD","in_stock":true},{"title":"DS-SERIES","offer_id":43497024389198,"sku":"I-103-DS","price":1436.79,"currency_code":"USD","in_stock":true},{"title":"ER-SERIES","offer_id":43497024421966,"sku":"I-103-ER","price":1984.73,"currency_code":"USD","in_stock":true},{"title":"RM-SERIES","offer_id":43497024454734,"sku":"I-103-RM","price":1537.75,"currency_code":"USD","in_stock":true},{"title":"ZX-SERIES","offer_id":43497024487502,"sku":"I-103-ZX","price":2603.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/9484\/5518\/files\/I-13-1_c4c37694-dd09-458b-bbd3-6a24a44bfcd3.jpg?v=1772654087"},{"product_id":"21-24-bmw-m2-m3-m4-g87-g80-g82-true-rear-coilover","title":"21-24 BMW M2 \/ M3 \/ M4 (G87 \/ G80 \/ G82) (TRUE REAR COILOVER)","description":"\u003cdiv class=\"series-copy br-series\"\u003e\n\u003ch1\u003eBR Series\u003c\/h1\u003e\n\u003cdiv class=\"image-gallery-br\"\u003e\n\u003cdiv\u003e\u003ca href=\"\/\/cdn.shopify.com\/s\/files\/1\/0036\/6863\/9856\/products\/bc-racing-default-br-series.jpg?v=1571253987\" class=\"big image-link\"\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0036\/6863\/9856\/products\/bc-racing-default-br-series_medium.jpg?v=1571253987\" alt=\"\"\u003e \u003c\/a\u003e\u003c\/div\u003e\n\u003cp class=\"gallery-disclaimer\"\u003e\"Product images shown are for reference only and may not accurately represent the actual product received\"\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003eThe BC Racing BR Series offers the most affordable entry into coilover suspension without sacrificing performance, comfort, build quality, vehicle height, or handling. This is done by extensively testing each vehicle then refining the coilover characteristics as many times as needed to ensure the most well-balanced and affordable aftermarket suspension conceivable. BC Racing takes great pride in choosing spring rates for our off-the-shelf kits that strike the perfect balance between comfort and performance so you're never stuck with an oversprung suspension like many other brands sell. BC Racing offers one of the widest ranges of damping adjustment with 30-clicks of compression\/rebound adjusted simultaneously on the BR Series. With meticulously chosen spring rates, damper valving, and one of the widest adjustment ranges in the industry, you can't go wrong with the BC Racing BR Series Coilover System.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHighly Customizable\u003c\/li\u003e\n\u003cli\u003eMono-Tube Shock Design\u003c\/li\u003e\n\u003cli\u003eLinear Piston And Damping Curve\u003c\/li\u003e\n\u003cli\u003eHeight Adjustment Independent Of Spring Compression\u003c\/li\u003e\n\u003cli\u003e30-Clicks Of Simultaneous Compression\/Rebound Adjustment\u003c\/li\u003e\n\u003cli\u003eFront Camber Plates Standard On Applicable Kits\u003c\/li\u003e\n\u003cli\u003eRear Camber Plates Available For Applicable Kits\u003c\/li\u003e\n\u003cli\u003eCustom Spring Rates And Swift Springs Available\u003c\/li\u003e\n\u003cli\u003eCustom Valving Or Valving Paired For Custom Spring Rates\u003c\/li\u003e\n\u003cli\u003e2-Year Warranty Against Manufacturers Defect\u003c\/li\u003e\n\u003cli\u003eFully Rebuildable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"series-copy ds-series\"\u003e\n\u003ch1\u003eDS Series\u003c\/h1\u003e\n\u003cdiv class=\"image-gallery-ds\"\u003e\n\u003cdiv\u003e\u003ca href=\"\/\/cdn.shopify.com\/s\/files\/1\/0036\/6863\/9856\/products\/bc-racing-default-ds-series.jpg?v=1571253989\" class=\"big image-link\"\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0036\/6863\/9856\/products\/bc-racing-default-ds-series_medium.jpg?v=1571253989\" alt=\"\"\u003e \u003c\/a\u003e\u003c\/div\u003e\n\u003cp class=\"gallery-disclaimer\"\u003e\"Product images shown are for reference only and may not accurately represent the actual product received\"\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003eBC Racing's new proprietary digressive piston design offers increased damping force at low piston velocities while maintaining a linear damper feel at higher piston velocities. One of the greatest advantages of increased low-speed damping force relates to what the driver feels, e.g., roll, pitch, dive, and quick weight transitions on technical road courses. For The Ultimate In Driver Feel - Choose BC Racing DS Series Coilovers.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHighly Customizable\u003c\/li\u003e\n\u003cli\u003eMono-Tube Shock Design\u003c\/li\u003e\n\u003cli\u003eDigressive Piston And Damping Curve\u003c\/li\u003e\n\u003cli\u003eSatin Chrome Finished Shock Body\u003c\/li\u003e\n\u003cli\u003eHeight Adjustment Independent Of Spring Compression\u003c\/li\u003e\n\u003cli\u003e30-Clicks Of Simultaneous Compression\/Rebound Adjustment\u003c\/li\u003e\n\u003cli\u003eFront Camber Plates Standard On Applicable Kits\u003c\/li\u003e\n\u003cli\u003eRear Camber Plates Available For Applicable Kits\u003c\/li\u003e\n\u003cli\u003eCustom Spring Rates And Swift Spring Compatible\u003c\/li\u003e\n\u003cli\u003eCustom Valving Or Valving - Paired For Custom Spring Rates\u003c\/li\u003e\n\u003cli\u003e2-Year Warranty Against Manufacturers Defect\u003c\/li\u003e\n\u003cli\u003eFully Rebuildable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"series-copy er-series\"\u003e\n\u003ch1\u003eER Series\u003c\/h1\u003e\n\u003cdiv class=\"image-gallery-er\"\u003e\n\u003cdiv\u003e\u003ca href=\"\/\/cdn.shopify.com\/s\/files\/1\/0036\/6863\/9856\/products\/bc-racing-default-er-series.jpg?v=1571253991\" class=\"big image-link\"\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0036\/6863\/9856\/products\/bc-racing-default-er-series_medium.jpg?v=1571253991\" alt=\"\"\u003e \u003c\/a\u003e\u003c\/div\u003e\n\u003cp class=\"gallery-disclaimer\"\u003e\"Product images shown are for reference only and may not accurately represent the actual product received\"\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003eThe BC Racing ER Series Coilover System is the next evolution in your suspension tuning and vehicle setup needs. The ER Series offers 30-clicks of independently adjustable compression and rebound with remote reservoirs to increase oil capacity and help with faster heat dissipation. Each ER Series Coilover System undergoes the same rigorous testing and development as the coilover series that precede it, with the addition of more extensive real-world track testing. For racers and enthusiasts that are looking for more adjustability in terms of varying compression and rebound settings, look no further than the BC Racing ER Series Coilover System.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHighly Customizable\u003c\/li\u003e\n\u003cli\u003eMono-Tube Damper\u003c\/li\u003e\n\u003cli\u003eLinear Twin-Piston Design\u003c\/li\u003e\n\u003cli\u003eHeight Adjustment Independent Of Spring Compression\u003c\/li\u003e\n\u003cli\u003e30-Clicks Of Compression Adjustment Via The External Reservoirs\u003c\/li\u003e\n\u003cli\u003e30-Clicks Of Rebound Adjustment From The Top Of The Damper\u003c\/li\u003e\n\u003cli\u003eFront And Rear Camber Plates Standard On All Applicable Kits\u003c\/li\u003e\n\u003cli\u003eFront And Rear Pillowball Mounts Standard When Camber Plates Do Not Apply\u003c\/li\u003e\n\u003cli\u003eCustom Spring Rates And Swift Spring Compatible\u003c\/li\u003e\n\u003cli\u003eCustom Valved To Match The Drivers Requested Spring Rates\u003c\/li\u003e\n\u003cli\u003eSwift Spring Upgrade Available On Most Applications\u003c\/li\u003e\n\u003cli\u003e2-Year Warranty Against Manufacturers Defect\u003c\/li\u003e\n\u003cli\u003eFully Rebuildable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"series-copy hm-series\"\u003e\n\u003ch1\u003eHM Series\u003c\/h1\u003e\n\u003cdiv class=\"image-gallery-hm\"\u003e\n\u003cdiv\u003e\u003ca href=\"\/\/cdn.shopify.com\/s\/files\/1\/0036\/6863\/9856\/products\/bc-racing-default-hm-series.jpg?v=1571253994\" class=\"big image-link\"\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0036\/6863\/9856\/products\/bc-racing-default-hm-series_medium.jpg?v=1571253994\" alt=\"\"\u003e \u003c\/a\u003e\u003c\/div\u003e\n\u003cp class=\"gallery-disclaimer\"\u003e\"Product images shown are for reference only and may not accurately represent the actual product received\"\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003eThe BC Racing HM Series Coilover System gets its great qualities from a combination of two previous BC Racing Coilover Systems - the RM Series and ER Series. The HM Series uses an inverted mono-tube damper, just like the RM Series, but adds the independent compression and rebound adjustment of the ER Series. Each HM Series Coilover System uses inverted mono-tube dampers front and rear on McPherson strut vehicles with steel braided lines leading from the top of the damper to the external reservoirs. The external reservoirs allow for a higher oil capacity with the added benefit of increased thermal dissipation, they also house the secondary damping piston. For Subarus and other McPherson suspension vehicles that are heavily tracked, the BC Racing HM Series Suspension System is definitely worth checking out!\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHighly Customizable\u003c\/li\u003e\n\u003cli\u003eSwift Springs Come Standard On HM Series Coilovers\u003c\/li\u003e\n\u003cli\u003eInverted Mono-Tube Damper\u003c\/li\u003e\n\u003cli\u003eLinear Twin-Piston Design\u003c\/li\u003e\n\u003cli\u003eHeight Adjustment Independent Of Spring Compression\u003c\/li\u003e\n\u003cli\u003e30-Clicks Of Compression Adjustment Via The External Reservoirs\u003c\/li\u003e\n\u003cli\u003e30-Clicks Of Rebound Adjustment From The Bottom Of The Damper\u003c\/li\u003e\n\u003cli\u003eFront And Rear Camber Plates Standard On All Applicable Kits\u003c\/li\u003e\n\u003cli\u003eFront And Rear Pillowball Mounts Standard When Camber Plates Do Not Apply\u003c\/li\u003e\n\u003cli\u003eCustom Valved To Match The Drivers Requested Spring Rates\u003c\/li\u003e\n\u003cli\u003e2-Year Warranty Against Manufacturers Defect\u003c\/li\u003e\n\u003cli\u003eFully Rebuildable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"series-copy rm-series\"\u003e\n\u003ch1\u003eRM Series\u003c\/h1\u003e\n\u003cdiv class=\"image-gallery-rm\"\u003e\n\u003cdiv\u003e\u003ca href=\"\/\/cdn.shopify.com\/s\/files\/1\/0036\/6863\/9856\/products\/bc-racing-default-rm-series.jpg?v=1571253996\" class=\"big image-link\"\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0036\/6863\/9856\/products\/bc-racing-default-rm-series_medium.jpg?v=1571253996\" alt=\"\"\u003e \u003c\/a\u003e\u003c\/div\u003e\n\u003cp class=\"gallery-disclaimer\"\u003e\"Product images shown are for reference only and may not accurately represent the actual product received\"\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003eThe BC Racing RM Series Coilover System uses a mono-tube inverted damper in the front and rear of vehicles that use McPherson style OEM strut suspension. On vehicles that use front struts only, BC Racing provides an inverted front strut and then provides an upright BR Series damper for the rear. Inverted dampers are useful in decreasing unsprung weight by moving the greatest mass of the strut to the top where it connects to the sprung weight of the chassis, where weight can be more easily shaved. The BC Racing RM Series Coilover System uses a much larger inverted piston shaft that can handle higher lateral loads for longer periods of time without fatigue. These higher lateral loads are only prevalent on McPherson style strut suspension, not on Double A-Arm vehicles.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHighly Customizable\u003c\/li\u003e\n\u003cli\u003eInverted Mono-Tube Strut Design\u003c\/li\u003e\n\u003cli\u003eLinear Piston And Damping Curve\u003c\/li\u003e\n\u003cli\u003eHeight Adjustment Independent Of Spring Compression\u003c\/li\u003e\n\u003cli\u003e30-Clicks Of Simultaneous Compression\/Rebound Adjustment\u003c\/li\u003e\n\u003cli\u003eFront Camber Plates Standard On Applicable Kits\u003c\/li\u003e\n\u003cli\u003eRear Camber Plates Available For Applicable Kits\u003c\/li\u003e\n\u003cli\u003eCustom Spring Rates And Swift Spring Compatible\u003c\/li\u003e\n\u003cli\u003eCustom Valving Or Valving Paired For Custom Spring Rates\u003c\/li\u003e\n\u003cli\u003e1-Year Warranty Against Manufacturers Defect\u003c\/li\u003e\n\u003cli\u003eFully Rebuildable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"series-copy zr-series\"\u003e\n\u003ch1\u003eZR Series\u003c\/h1\u003e\n\u003cdiv class=\"image-gallery-zr\"\u003e\n\u003cdiv\u003e\u003ca href=\"\/\/cdn.shopify.com\/s\/files\/1\/0036\/6863\/9856\/products\/bc-racing-default-zr-series.jpg?v=1571253999\" class=\"big image-link\"\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0036\/6863\/9856\/products\/bc-racing-default-zr-series_medium.jpg?v=1571253999\" alt=\"\"\u003e \u003c\/a\u003e\u003c\/div\u003e\n\u003cp class=\"gallery-disclaimer\"\u003e\"Product images shown are for reference only and may not accurately represent the actual product received\"\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003eThe BC Racing ZR Series Coilovers offer the most adjustability of any BC Racing Coilover System to date. Each ZR Series Coilover System is track tested and developed specifically for racers looking for more damping adjustability than the ER or HM Series can provide. The ZR Series offers 15-clicks of low-speed compression adjustment, 12-clicks of high-speed compression adjustment, and 30-clicks of rebound adjustment. They also offer full height adjustability independent of piston shaft travel and spring compression. On cars with McPherson struts, the ZR Series comes standard with an inverted mono-tube damper. The damper has a steel braided line exiting the top of the damper leading to the external reservoirs that can be remotely mounted on the chassis for easy adjustment. Cars with Double A-Arm suspension come with upright dampers. These dampers have steel braided lines or solid stems that exit the damper at the bottom and lead to the external reservoir that can be mounted under the chassis or on the shock body itself.\u003c\/p\u003e\n\u003cp\u003e*Not all vehicles allow for inverted front and rear dampers. In such cases an upright mono-tube damper will be supplied. The braided line\/hard stem for the external reservoir exits the base of the damper when not inverted. Please note that not all vehicles use camber plates in the front and\/or rear. In such cases pillowball top mounts are supplied in place of camber plates on HM \u0026amp; ZR Series Coilover Systems.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInverted Mono-Tube Damper\u003c\/li\u003e\n\u003cli\u003eLinear Twin Piston Design\u003c\/li\u003e\n\u003cli\u003eSwift Springs Come Standard On ZR Series Coilover\u003c\/li\u003e\n\u003cli\u003eHeight Adjustment Independent Of Spring Compression\u003c\/li\u003e\n\u003cli\u003e30-Clicks Of Rebound Adjustment\u003c\/li\u003e\n\u003cli\u003e15-Clicks Of Low Speed Compression Adjustment\u003c\/li\u003e\n\u003cli\u003e12-Clicks Of High Speed Compression Adjustment\u003c\/li\u003e\n\u003cli\u003eFront And Rear Camber Plates Standard On All Applicable Kits\u003c\/li\u003e\n\u003cli\u003eFront And Rear Pillowball Mounts Standard When Camber Plates Do Not Apply\u003c\/li\u003e\n\u003cli\u003eCustom Spring Rates Available\u003c\/li\u003e\n\u003cli\u003eCustom Valving Or Valving Paired For Custom Spring Rates\u003c\/li\u003e\n\u003cli\u003e2-Year Warranty Against Manufacturers Defect\u003c\/li\u003e\n\u003cli\u003eFully Rebuildable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003eZX Series\u003c\/h1\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0036\/6863\/9856\/files\/09-ZX-png_fff09b55-28c6-4949-9b56-8b9bfd06a505.png?v=1767715496\" alt=\"\" width=\"253\" height=\"253\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe BC Racing ZX Series Coilovers are the highest level of adjustability within the BC Racing coilover system to date, next to the ZR series. Designed specifically for racing and track use, the ZX Series features 3-way adjustable damping force. The ZX Series provides 20 clicks of low-speed compression, 12 clicks of high-speed compression, and 30 clicks of rebound adjustment. The ZX Series adopts an upright cylinder design, rather than inverted cylinders used on the ZR series. This allows for the possibility of replacing the upper mount, while combining the excellent characteristics of the DS and ER series. Coupled with ultra-high viscosity index racing shock fluid, the ZX Series can maintain outstanding performance on the track and in drifting competitions for extended periods. \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDigressive Piston and Damping Curve\u003c\/li\u003e\n\u003cli\u003eUltra-high Viscosity Index Full Synthetic Shock Fluid\u003c\/li\u003e\n\u003cli\u003eUpright Mono-Tube Damper\u003c\/li\u003e\n\u003cli\u003e3-Way Adjustable Damping Control\u003c\/li\u003e\n\u003cli\u003e30 Clicks of Rebound Adjustment\u003c\/li\u003e\n\u003cli\u003e20 Clicks of Low Speed Compression Adjustment\u003c\/li\u003e\n\u003cli\u003e12 Clicks of High Speed Compression Adjustment\u003c\/li\u003e\n\u003cli\u003eDual Piston Design\u003c\/li\u003e\n\u003cli\u003eTrack-Oriented Setup\u003c\/li\u003e\n\u003cli\u003eCustom Spring Rates Available\u003c\/li\u003e\n\u003cli\u003e2-Year Warranty Against Manufacturers Defect\u003cmeta charset=\"utf-8\"\u003e\n\u003c\/li\u003e\n\u003cli\u003eFully Rebuildable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"BC Racing","offers":[{"title":"BR-SERIES","offer_id":43497024913486,"sku":"I-134-BR","price":1233.42,"currency_code":"USD","in_stock":true},{"title":"DS-SERIES","offer_id":43497024946254,"sku":"I-134-DS","price":1436.79,"currency_code":"USD","in_stock":true},{"title":"ER-SERIES","offer_id":43497024979022,"sku":"I-134-ER","price":1984.73,"currency_code":"USD","in_stock":true},{"title":"ZX-SERIES","offer_id":43497025011790,"sku":"I-134-ZX","price":2725.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0646\/9484\/5518\/files\/bc-racing-default-br-series_350x350_42ac5c17-839b-4205-a6e1-2d0a628803c6.jpg?v=1772654094"}],"url":"https:\/\/performancepart.ca\/collections\/g87-m2-2023-present.oembed?page=2","provider":"Performance Part Canada","version":"1.0","type":"link"}